Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test ChambersVacuum oven ( DP series)
  • $item.Title
  • $item.Title

Vacuum oven ( DP series)

Hyde Science and Technology Limited

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
ShanXi, XiAn
Vacuum oven ( DP series)

Application:

The DP Series vacuum ovens provide the right temperature and vacuum environment. Do vacuum drying or thermal test under vacuum conditions in the fields of electrical, electronics, aviation and other related fields. The vacuum drying oven can independently perform low pressure test, or comprehensive high temperature for comprehensive test. Based on years of experience in the field of environmental simulation equipment, the company has optimized the temperature field of the vacuum drying oven, and the technical indicators have reached the first-class level in the industry.


Features:

1. The shell of the vacuum oven is made of cold rolled steel plate and coated with double sided electrostatic epoxy polyester powder. 

2. The pressure-bearing inner chamber is made of SUS304 stainless steel plate.

3. Use centrifugal glass insulation cotton felt insulation. The hinge of working chamber is installed on the left side of the oven to ensure optimum contact pressure when the door is closed. 

4. The controller is installed in the middle or lower part of the oven. 

5. The electrical components are installed in the electric control cabinet, and the operator and test samples can be fully protected.


Function principle:

1. The door of working chamber is made of silicone rubber seals, to ensure a good seal at low air pressure. 

2. The low-pressure environment inside the oven is realized by the vacuum pump pumping the air inside the oven out of the oven. 

3. The temperature environment inside the oven is provided by heater installed outside the pressure-bearing inner chamber. 

4. Use Japanese Yokogawa UT155 or Korean Autonics controller to control the temperature and pressure. 

5. A separate set of temperature sensors is also provided to protect the test chamber and the testing pieces. 

6. Pressure can be restored automatically or manually.


Standard configuration:

1. Internal pressure-bearing external insulation box: 27-216L;

2. The air pressure can be as low as 1 kPa;

3. Nickel-chromium alloy electric heater;

4. PID+SSR temperature control;

5. Hysteresis pressure control;

6. Independent over-temperature protection system;

7. The door opening angle is 120°;

8. Observation window (003,005: no; 01, 02: 400W*400H mm);

9. Shelf: 2 pieces;

10. Back wall Φ33 blind flange;

11. 4 casters;


Optional accessories: 

Oil mist trap, cold trap, other options and special requirements can be added according to user needs;


Note: 

1. The laboratory is sensitive to oil mist, oil mist traps can be used. You can also connect the exhaust pipe by yourself and remove the oil mist from the laboratory.

2. The test sample contains more water, and the vacuum pump needs to be changed to the type with gas ballasting. When drying, open the gas ballasting.

3. When drying the samples, organic matter such as oil mist evaporates, then can use a cold trap, to adsorb organic matter onto the surface of the cold trap, in order to avoid organic matter into the vacuum pump lubricant.

 

Technical parameter:

Model

HD-01DP

HD-02DP

Volume

90L

216 L

Internal dimensions (D*W*H)

450*450*450 mm

600*600*600 mm

External dimensions (D*W*H)

670*670*1520 mm

820*820*1670 mm

blind flange

Φ 33 mm, on the back wall of the drying oven

Performance

Temperature  range

Room temperature + 20℃...200℃

Temperature fluctuation

≤ 1 ℃

Pressure range

Atmospheric pressure... 1kPa

Controller

International well-known brand temperature controller, digital display temperature control, with PID self-tuning function, PID+SSR temperature control

Heater

Nickel-chromium alloy electric heater

Power supply

AC 380V/50Hz, three-phase four-wire + earth wire

Power

2.5 kW

3.5 kW

Noise

≤ 70 dB(А)


  Hyde Science and Technology Limited, established in 2010, is a high-tech corporation with equipment development, production, sale and maintenance integrated. Our company is engaged in studying and developing the climate testing techniques, manufacturing environmental testing equipment, researching and developing management software. Our main equipment are: temperature test chamber, temperature humidity test chamber, high low temperature/ low air pressure test chamber, thermal vacuum chamber, thermal shock testing chamber (2/3 areas), salt fog chamber, sand and dust test chamber, rain spray test chamber, temperature humidity vibration test chamber, walk in temperature (humidity) test chamber, customized test chamber, drying oven, etc.. These products are widely used in aerospace, electrical and electronics, instrumentation, national defense industry, solar modules, auto parts, biological medicine, universities and colleges, etc.. We also reach cooperation arrangements with domestic first line manufacturers of mechanical equipment and measuring equipment, sell various types of mechanical measurement and testing equipment, such as vibration system, shock / bump system, centrifuges, tilting and swing system, CMM (coordinate measuring machine) and various nonstandard customized mechanical equipment, to satisfy the diversified demands of customers. We keep professionalism, dedication and innovation, constantly increase our technical power, create good conditions of new equipment and technology to all our customers. We are proud of your successes and sincerely hope for long term and mutually beneficial cooperation with you.
Similar Product Recommend