Membership
Help
Poocca Hydraulic (Shenzhen) Co., Ltd.
Poocca Hydraulic (Shenzhen) Co., Ltd.
Variable Piston Motors A6VM

PA A6VM Variable Motor, with an axial tapered piston rotary group of bent-axis design for hydrostatic drives in open and closed circuits. For use in and stationary application areas. The wide control range enables the variable motor to satisfy the requirement for high speed and high torque.
Name | PA-A6VM Series Hydraulic Variable Axial Piston Motor |
Series | Series 6X |
Sizes | 28,55,80,107,140,160,200,250,355,500,1000cc/rev |
Nominal Pressure | 400 bar |
Maximum Pressure | 450 bar |
Operation Mode | Open and Closed Circuit |
Technical data A6VM series | |||||||||
Size | NG | 28 | 55 | 80 | 107 | 140 | 160 | ||
displacement | Vg max | cm3 | 28.1 | 54.8 | 80 | 107 | 140 | 160 | |
Vg min | cm3 | 0 | 0 | 0 | 0 | 0 | 0 | ||
Vg x | cm3 | 18 | 35 | 51 | 68 | 88 | 61 | ||
Maximum rotational | at Vg max | nnom | rpm | 5550 | 4450 | 3900 | 3550 | 3250 | 3100 |
at Vg < Vg x | nmax | rpm | 8750 | 7000 | 6150 | 5600 | 5150 | 4900 | |
where Vg 0 | nmax | rpm | 10450 | 8350 | 7350 | 6300 | 5750 | 5500 | |
Inlet flow3) | at nnom and | qv max | l/min | 156 | 244 | 312 | 380 | 455 | 496 |
Torque4) | at Vg max and | T | Nm | 179 | 349 | 509 | 681 | 891 | 1019 |
at Vg max and | T | Nm | 157 | 305 | 446 | 596 | 778 | 891 | |
Rotary stiffness | Vg max toVg/2 | cmin | kNm/rad | 6 | 10 | 16 | 21 | 34 | 35 |
Vg/2 to 0 | cmin | kNm/rad | 18 | 32 | 48 | 65 | 93 | 105 | |
Moment of inertia for rotary group | JTW | kgm2 | 0.0014 | 0.0042 | 0,008 | 0.0127 | 0.0207 | 0.0253 | |
Maximum angular acceleration | α | rad/s² | 47000 | 31500 | 24000 | 19000 | 11000 | 11000 | |
Case volume | V | l | 0.5 | 0.75 | 1.2 | 1.5 | 1.8 | 2.4 | |
Weight approx. | m | kg | 16 | 28 | 36 | 46 | 61 | 62 | |
Size | NG | 200 | 250 | 355 | 500 | 1000 | |||
displacement | Vg max | cm3 | 200 | 250 | 355 | 500 | 1000 | ||
Vg min | cm3 | 0 | 0 | 0 | 0 | 0 | |||
Vg x | cm3 | 76 | 205 | 300 | 417 | 1000 | |||
Maximum rotational | at Vg max | nnom | rpm | 2900 | 2700 | 2240 | 2000 | 1600 | |
at Vg < Vg x | nmax | rpm | 4600 | 3300 | 2650 | 2400 | 1600 | ||
where Vg 0 | nmax | rpm | 5100 | 3300 | 2650 | 2400 | 1600 | ||
Inlet flow3) | at nnom and | qv max | l/min | 580 | 675 | 795 | 1000 | 1600 | |
Torque4) | at Vg max and | T | Nm | 1273 | ‒ | ‒ | ‒ | ‒ | |
at Vg max and | T | Nm | 1114 | 1391 | 1978 | 2785 | 5571 | ||
Rotary stiffness | Vg max toVg/2 | cmin | kNm/rad | 44 | 60 | 75 | 115 | 281 | |
Vg/2 to 0 | cmin | kNm/rad | 130 | 181 | 262 | 391 | 820 | ||
Moment of inertia for rotary group | JTW | kgm2 | 0.0353 | 0,061 | 0,102 | 0,178 | 0.55 | ||
Maximum angular acceleration | α | rad/s² | 11000 | 10000 | 8300 | 5500 | 4000 | ||
Case volume | V | l | 2.7 | 3 | 5 | 7 | 16 | ||
Weight approx. | m | kg | 78 | 100 | 170 | 210 | 430 | ||
The displacement is infinitely variable. the output speed depends on the flow of the pump and the displacement of the motor. The output torque is increases with the pressure differential between the high and low pressure side and with increasing displacement.The output torque is increases with the pressure differential between the high and low pressure side and with increasing displacement.

Wide control range with hydrostatic transmission. Wide selection of control devices. cost savings through elimination of gear shifts and possibility of using smaller pumps.

Compact, robust bearing system with long service life. High power density. Good starting characteristics. Low moment of inertia.

Construction machinery: double pumps, single pumps, walking motors, swing
motors, etc. for excavators, pavers, road rollers, presses, paving machines, drills,bulldozers, heavy excavators, road mixers, etc.
Construction machinery: concrete pump truck, concrete pump truck transporter,concrete mixer truck and other hydraulic main pumps, auxiliary pumps, swingmotors, and walking motors.
Industrial equipment: metallurgy, mining, medicine, chemicals, plastics,die-casting machinery,o
Hydraulic main pumps, auxiliary pumps, motors for marine machinery, cranes,ceramic machinery, aluminum extrusion presses, etc.
Ship/Aviation: pumps & motors for ship hydraulic technology industry used inship deck machinery, operating systems and control systems, such as rudder shipmachines, windlasses,cranes, etc.; pumps/motors and accessories for aerospacehydraulic technology industry Device.

1.Quick response within 12 hours
2.Accept small order(MOQ:1pcs)
3.Custom service.Unusual packaging,standard packing or as customer required
4.Excellent after-sales service
5.Strict quality control system.99% factory testing and inspection personnel inaccordance with international standards for the high frequency sampling,
to ensure the quality of products manufactured.

We guarantee POOCCA hydraulic pumps and motors quality for 12 months,we will maintenance quality problems for free in the warranty and providetechnical support in the whole production life.