Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineVLF Test Equipment
  • $item.Title
  • $item.Title

VLF Test Equipment

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
Large test range: 0.1Hz, 0.05Hz and 0.02hz multi frequency selection, large test rangeComprehensive protection: multiple protection (over-voltage protection, over- current protection at high and low voltage sides), rapid action (when acting)
Introduction

High voltage withstand test of electrical equipment is one of the most important items specified in insulation preventive test.

The withstand voltage test can be divided into ac withstand voltage test and dc withstand voltage test. The ac withstand voltage test can be divided into power frequency, frequency conversion and 0.1hz ultra-low frequency test technology, of which 0.1hz ultra-low frequency technology is the latest technology recommended by the current international electrotechnical commission.

Our company's new generation of VLF Test Equipment equipment is the core product independently developed with the latest American technology. VLF Test Equipment adopts 7-inch touch screen, the latest arm7 single chip microcomputer, high-speed ad acquisition circuit, and is equipped with background management software. VLF Test Equipment overcomes many shortcomings of domestic similar products.Meanwhile, its cost performance is much higher than that of similar imported products. VLF Test Equipment is especially suitable for withstand voltage test of electrical equipment with large insulation equivalent capacitance (such as power cable, power capacitor, large and medium-sized generator and motor, etc.)

Feature

Advanced technology: digital frequency conversion technology, microcomputer control, pressure rise, pressure reduction, measurement, protection, etc

The test process is fully automated.

Easy to operate: simple wiring, fool operation.

Comprehensive protection: multiple protection (over-voltage protection, over- current protection at high and low voltage sides), rapid action (when acting)

Room ≤ 10ms), the instrument is safe and reliable.

Safety and reliability: the controller is connected with the low voltage of the high voltage generator, with photoelectric control, safe and reliable use.

The high and low voltage closed-loop negative feedback control circuit is adopted, and the output has no capacity rise effect.

Complete configuration: capacitive touch screen, LCD Chinese character display, automatic storage, automatic printing.

Large test range: 0.1Hz, 0.05Hz and 0.02hz multi frequency selection, large test range.

Small volume and light weight: it is very convenient for outdoor operation.

Operation instructions

VLF Test Equipment output wiring method

1


Wiring instructions: connect the control output special line, high voltage output special line and grounding wire equipped with the product according to the method shown in Figure 3. The power cord of the power socket is connected to the AC of 220V / 50Hz/60HZ. (Input voltage can be customized)


1. Some setting and boosting interface of the vlf tester

Below controller interface indicates that the voltage is boosting

2

Below controller interface prompts to stop the test

3

Below is the over current protection prompted by controller

4

More operation instructions ,pls kindly contact the supplier.

1. Upper computer background management software

This VLF Test Equipment is equipped with VLF super low frequency and high voltage generator upper computer background management software, as shown The software supports Windows XP / 2000 / 2007 and other operating systems. The software can be installed on the computer and connected with the USB of the controller through the USB connection line. All the operation functions of the controller can be operated on the software, such as setting parameters,

starting the boosting test, saving historical data, etc.

5

I. Power cable withstand voltage test method

1. Disconnect all electrical equipment connected to the tested cable.

2. Use a megger to test the insulation parameters of each phase of the cable, and carry out the ultra-low frequency withstand voltage test only after the test is qualified.

3. Set the test voltage value: Umax = 3uo, where uo is the rated phase voltage of the cable.

Example 1: cable parameter: the rated line voltage is 10kV, and the rated phase voltage uo = 6kV, so the test voltage setting value is:

Umax = 3uo = 18kV

See Table 1 for the setting value of 0.1Hz ultra-low frequency test voltage of various rubber and plastic insulated power cables.

Table 1 0.1Hz ultra-low frequency test voltage and time of various rubber plastic insulated power cables.


Rated voltage

U0/US(kV)

Handover test

Preventive experiment

multiple

Test voltage(kV)

Test time(mins)

multiple

Test voltage(kV)

Test time(mins)

1.8/3

3U0

5

60

3U0

5

15

3.6/6

3U0

11

60

3U0

11

15

6/6

3U0

18

60

3U0

18

15

6/10

3U0

18

60

3U0

18

15

8.7/10

3U0

26

60

3U0

26

15

12/20

3U0

36

60

3U0

36

15

21/35

3U0

63

60

3U0

63

15

26/35

3U0

78

60

3U0

78

15


Note: UN is the rated voltage of the cable, and uo is the phase voltage of the cable.

1. Test time: 60 minutes for handover test and 15 minutes for preventive test.

2. Setting current value of overcurrent protection:

Estimation method of capacitive current (or leakage current) of ultra-low frequency withstand voltage test article:

Io=2πfCU=2×3.14×0.1CU(mA)… (formula 1)

C is the electric capacity of the cable to the ground, unit: UF; u is the effective value of the test voltage, unit: kV.

Example 2: a 10KV (UN = 10kV, uo = 8.7kv) cable is 4km long, with a single phase to ground capacitance of 0.21uf/km and 0.1Hz super

If the low frequency test voltage is 26kv (peak value), the leakage current is approximately:

Io=2πfCU=2×3.14×0.1CU=0.628×0.21×4×26/ 2 =9.69(mA)

Setting current value of overcurrent protection: I=kIo…(formula 2)


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend