Membership
Help
Ningbo Zuanbang Technology Co., Ltd.
Ningbo Zuanbang Technology Co., Ltd.
The water in ordinary rivers and lakes is generally not drinkable directly, and there are many microorganisms and bacteria. Second, some of the polluted well water on the surface cannot be used as drinking water. Uncontaminated mountain spring water is of course the best drinking water, but this kind of mountain spring water is not available everywhere, and resources are still very scarce. The polluted spring water in some mountains is also not drinkable.
The remaining two, tap water and purified water, are the most used water sources by our species. Purified water filters and softens tap water, and drinking it reduces limescale.
Water purification equipment requires vontron membrane. A set of ordinary household filter elements generally needs to be replaced in 3 to 6 months, because after long-term use, the filter residue inside has accumulated a lot. If it is not replaced regularly, it will pollute the water quality,harmful to health.
| Specifications | BW-8040 | BW-4040 | LP-8040 | LP-4040 |
| Material | Aromatic polyamide | |||
| Structure | Spiral-wound | |||
| Effective Membrane Area(m²) | 37 | 7.6 | 37 | 7.6 |
| Thickness of the inlet grid(mil) | 34 | |||
| Standard Test Solution | 2000mg/L NaCl | 1500mg/L NaCl | ||
| Operating Pressure | 1.55Mpa | 1.55Mpa | 1.05Mpa | 1.05Mpa |
| Test Temperature | 25℃ | |||
| Recovery(%) | 15% | |||
| pH | 6.5~7 | |||
| Permeate Flow Rate(m3/d)/GPD | 38/10000 | 7.6/2000 | 40/10500 | 8/2100 |
| Rejection(%) | 99.5 | 99.0 | ||
| Max. Operating pressure | 4.1Mpa (600Psi) | |||
| Max. feed flow (GPM) | 75 | 16 | 75 | 16 |
| Feed Temperature | 5~45℃ | |||
| Feed pH | 3~11 | |||
| Cleaning pH | 2~12 | |||
| Max. feed turbidity | 1.0 | |||
| Max. feed SDI15 | 5 | |||
| Residual Chlorine | < 0.1 mg/L | |||
| Max. Pressure Drop each Element | 15 psi | |||
![]() | ![]() |
|
SPECIFICATION
human hair | pollens | lead dust | Fine silt | pharmaceuticals | fine silt |
75 microns | 10 | 0.1-0.7 | 0.01-1 | 0.001-0.01 | 0.0005-0.001 |
WORKING PRINCIPLE

Application Case

PRODUCT APPLICATION
![]() | ![]() | ![]() | ![]() |
| Pure water | Water reuse | cooling water | Boiler water |
FAQ
Q1: How do you clean an industrial RO membrane?
A:During a chemical cleaning process, membranes are soaked with a solution of chlorine bleach, hydrochloric acid or hydrogen peroxide. First the solution soaks into the membranes for a number of minutes and after that a forward flush or backward flush is applied, causing the contaminants to be rinsed out.
Q2: How long do industrial RO membranes last?
A: three to seven years
Reverse osmosis (RO) systems have become the industry standard for purification of any feed water source- as well as wastewater and reuse applications, including a number of industrial processes. The typical lifetime of an RO membrane element is three to seven years depending on the application.
Q3: What type of membrane is used in RO?
A:The RO unit uses thin-film composite (TFC) polyamide membranes in spiral-wound configuration.