Welcome Customer !

Membership

XwbooMining & Metallurgical EquipmentCrushing EquipmentJaw CrusherVU Aggregate Optimize
  • $item.Title
  • $item.Title

VU Aggregate Optimize

VIPEAK MINING MACHINERY CO. , LTD.

Model
Nature of the Manufacturer
Other
Product Category
Jaw Crusher
Place of Origin
,

VIPEAK MINING MACHINERY CO. , LTD.

Contact

Phone

Fax

Raw materials with moisture content of ≤2% and particle size of ≤15mm (which can be cheap and easily got from stone chips and rice stones) are reasonably and efficiently processed by the VU aggregate optimization system, reasonable output gradation, round particle shape,finished sand with controllable powder content, as well as dry and clean, high-value-added stone powder that can be recycled and reused (the applicable range is determined according to the raw material). Raw Materials: ......

Introduction

The VU aggregate optimization system independently developed and produced by Vipeak Mining Machinery, which is a high-end dry sand making system in the world. It adopts a highly intensive tower-style fully enclosed layout and can be used for limestone, river stone, granite, and stone chips produced in stone crushing. Large output but small amount of rice stone and other raw materials for sand making, integrating high-efficiency sand making, particle shape optimization, stone powder control, gradation adjustment, moisture content control, environmental protection treatment,, not only significantly improving production efficiency, but also realizing the overall improvement mechanism in various indicators such as sand particle type, gradation, and powder content, making the performance of machine-made sand comparable to natural sand, creating new opportunities and values for the development of the sand, cement, and concrete industry chain.
product introduction

Product Advantages

  • 01

    Crushing and Grinding Technology

    • “Stone-hit-stone” centrifugal crushing is adopted and raw materials are crushed, shaped and ground by rotor force to improve final grain shape and enlarge proportion of fine grains.
  • 02

    High-Quality Sand

    • VU sand grain is round, smooth and clean, with methylene blue value(MBV) below 0.5. Fineness modulus adjustable between 2.3 and 2.9 and powder content between 5% and13%.
  • 03

    Air Separation

    • Air separation and screening combined to achieve vibrating distribution, linear screening and powder collecting in one chamber.
  • 04

    Tower-Layout Design

    • Tower-layout design is compact and requires less floor area. The whole production line in a closed system, without risk of dust spill-out.

Product Specification


ModelVU-100VU-150VU-300
 Feeding size(mm)0-25
0-25
0-25
Feeding capacity(t/h)80-100125.150240-300
Capacity(t/h)70-90110-135220-270
Stone powder content(%)3- 15%
3- 15%
3- 15%
Power(kW)≈681≈996≈1974
Dimension(m)L×W×H29×8×26-28×15×24
Main equipment VU special sand making machine   
Classifier 
Dust Catcher
Fine sand recovery system
Bucket elevator 
Accessory equipmentHumidifying mixer
Belt conveyor 
Connecting pipes 
Steel frame for the sand making tower
Note: The capacity shown in this table changes with the changing of system parameters and raw material properties. The moisture content of the raw material is below 2%. For the information on configuration and capacity under specific working conditions, kindly consult our company’s technical engineer.
Any change of technical data shall not be advised additionally,

Model
VuS301
VuS501
Sand Making
Aggregates Shaping & Sand Making
Sand Making
Aggregates Shaping & Sand Making
Main machine
VSI6X1040VSI6X1263
Feeding size(mm)
0-400-40
Max feeding capacity(t/h)
100300150550
Powder content (%)
3-15%3-15%
Power(kW)
≈622≈966
Dimension L×W×H(m)
21×8×27.521×10×30.2
Main Equipment
VUS type vertical shaft impact crusher
Stone powder separating device
Environmentally friendly synchronous sorting screen
Fine sand recovery system
Dust Catcher 
Bucket elevator 
Accessory Equipment
Humidifying mixer
Connecting pipes
Belt conveyor
Steel frame for the sand making tower
table changes with the changing of system parameters and raw material properties. The moisture content of the raw material is below 2%. For the information on configuration and capacity under specific working conditions, kindly consult our company’s technical engineer.
Focus on equipment manufacturing for mine crushing, industrial milling, solid waste treatment.Since its inception, we have been adhering to the corporate philosophy of “To be your satisfied partner”, from product development, production, quality inspection, machine testing, sales to after-sales service, with rigorous, realistic and scientific style to create customer satisfaction. The products and services, business and service organizations in 105 countries across the country and around the world have made the industry's well-known "Vipeak" brand.
Similar Product Recommend