Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test ChambersWalk-in Environmental Chamber for Temperature Humidity Test
  • $item.Title
  • $item.Title

Walk-in Environmental Chamber for Temperature Humidity Test

GUANGDONG BELL EXPERIMENT EQUIPMENT CO., LTD.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
GuangDong,
DGBELL’s walk-in environmental chamber for temperature humidity testing is perfectly meets the large size test application that requires high temperature and high humidity. The walk-in chamber is constructed with structural steel, so it is able to test the large components and products. Various optional function is available for different test standards and requirements.

Applications of Walk-in Temperature Humidity Environmental Test Chamber

DGBELL’s Walk-in Temperature and Humidity Test Chambers perfectly meet the large size test application that requires high temperature and high humidity. The chamber is constructed with structural steel, the steady structure able to test the large components and products. The various optional function is available for different test standards and requirements.

Features of Walk-in Temperature Humidity Environmental Test Chamber

  1. Energy-efficient technology, more stable, durable longevity.
  2. Steel structure, Stainless steel interior cabinet, easy to clean.
  3. Test data logging output with the USB memory stick.
  4. RS485 and Ethernet remote control.
  5. Alarm notification via phone available.
  6. Programmable

Environmental Testing Standard

  • IEC 68-2-1 (GB/T 2423.1-2008)
  • IEC 68-2-2 (GB/T 2423.2-2008)
  • IEC 68-2-3 (GB/T 2423.3-2006)
  • IEC 68-2-30 (GB/T 2423.4-2008)
  • IEC 68-2-14 (GB/T 2423.22-2008)
  • MIL-STD-810D (GJB150.3A-2009)
  • MIL-STD-810D (GJB 150.4A-2009)
  • MIL-STD-810D (GJB150.9A-2009)

Parameters

ModelBTHW-6MBTHW-10MBTHW-15MBTHW-30MBTHW-80M
Test Space2000*2000*15002500*2000*20003000*2200*25005000*2000*30004000*2500*8000
W x H x D (mm)
External Dimension3350*2280*18003850*2480*23004350*2480*28005200*2280*43504200*2780*9700
W x H x D (mm)
Temperature RangeA:0~90℃ B:-20~90℃ C:-40~90℃ D: -70~90℃
Humidity Range20%RH-98%RH Low humidity : Maximum 5%R.H.
Temperature Fluctuation≤±0.5℃
Temperature Deviation≤±2℃
Temperature Uniformity≤±2℃
Humidity Fluctuation≤±2.5%
Humidity Deviation≤+2/-3%R.H. (when humidity >75%RH), ≤±5RH% (when humidity <75%RH)
Heating RateApprox 1~ 3℃/mins,average non-linear ,no load
Cooling RateApprox 0.5~ 1℃/ mins,average non-linear ,no load
Temperature Overshoot≤±2℃
Internal Material1.0mm thick SUS#304 high &low temperature resistance stainless steel.
External Material1.2mm thickness High temperature spray powder coated galvanized plate
CompressorTecumseh (France)-fully air-cooled double-fall cooling compressor. Or Bock (Germany) semi-enclosed air-cooled refrigeration.
OptionsDry air purge system ,Humidifying water auto purifying and supply system, New air ventilation system ,Fire-proof, explosion-proof & alarm system ,Low temperature low humidity, low temperature high humidity test requirement, Remote computer, alarm function

Precautions for operating walk-in temperature and humidity Environmental Test chamber

According to different names, the walk-in constant temperature and humidity test chamber can also be called constant temperature and humidity chamber, high and low temperature alternating humidity and heat test chamber, etc. It is mainly used for the detection of environmental resistance test materials. It adopts the originally imported controller, which can choose the test mode suitable for you according to your own use requirements.

At the same time, because the walk-in temperature and humidity environmental test chamber is an environmental test chamber that allows operators to enter, it is still dangerous. In order to avoid the occurrence of safety accidents, when we choose to use this walk-in environmental test chamber, we choose to determine whether we are meeting the following conditions.

  1. When we use this walk-in temperature and humidity environmental test chamber, we must first determine whether the door is locked, so as to better ensure that the set environment cannot be reached due to temperature leakage in the walk-in test chamber. But when locking the door of the test chamber, make sure that there are no other people in the studio, because not all high and low temperature alternating humidity and heat test chambers can open the door from outside the test chamber.
  2. If you need to open the door to conduct the test during the test, you must first do the protection to prevent injury caused by the hot or cold air rushing out of the studio. At the same time, it is also necessary to ensure that there is sufficient oxygen in the studio, which can ensure that the staff debugs internally, otherwise there may be a lack of oxygen.
  3. When the walk-in temperature and humidity environmental test chamber is working normally, the connected power supply should be stable at 380V, so if the person gets an electric shock, it is best to carefully check the power cord and other electrical parts of the device after each use. If problems arise, they must be resolved in time before they can be further tested using a walk-in constant temperature and humidity test chamber.

The above information is about how to correctly use the walk-in constant temperature and humidity test chamber for testing, and hope to help those in need. In the process of using environmental test chambers or battery test chambers for testing, we must first fully understand the operation process of the test chambers, so as to ensure the accuracy of the experimental data and ensure our own personal safety.

  Guangdong Bell Experiment Equipment Co., Ltd was established in 2005 with a registered capital of RMB 16.8 million. Located in Dongcheng District of Dongguan City, its factory covers an area of 20,000 square meters, with a building area of 12,000 square meters. As DGBELL attaches great importance to producing first-rate products, talents are highly valued. Among the 120 employees, half of them are with a college education background and 15 senior engineers, Enable us to provide excellent equipment and service to satisfy various customers, especially the customized non-standard equipment. Currently, after great efforts over the last 14 years, our annual production capacity has reached RMB 120 million.DGBELL not only focuses on the research and development of test chamber, but also specializes in its manufacture, selling as well as customer service. A wide variety of products are introduced into markets, such as Li-ion Battery Safety Test Equipment, EV (Electric Vehicle) Battery Safety Test Equipment, Environmental Test Equipment and Mechanical Test Equipment. We cooperated with many international famous corporations from Europe, Asia, South America and Australia, including auto companies, battery companies, electronic production companies, detection institutions and laboratories.As a responsible enterprise, DGBELL’s mission lies, on one hand, in creating a platform for staff to pursue happiness and fulfill their dreams, and on the other hand, providing customers with top-class testing solutions. To become the leading brand of the test equipment industry, DGBELL stresses commitment, pragmatism, service and creativity as its core value, and is always in the pursuit of high quality, customer satisfaction, continuous improvement as well as perfection and excellence of products.DGBELL aims at “ Technology assures quality while service enhances product” and orientated “ service first, sales follow; sincerity to each other and win-win”. DGBELL established a complete 4S system (Sale, Spare Part, Service, Survey) while DGBELL will utilize its wide and depth national relationship, powerful marketing and after-sale services capacity, rich technical strength to provide our customers with ideal Research, manufacturing environments & equipment that widely applied in electronics, Li-ion battery, EV battery, semi-conductor, medical, chemical, cosmetic, coatings, petroleum oil, food industries.Quick, high-efficient service is provided to eliminate customer’s worries. For years, DGBELL except performing a good service of its own products and distributed products, solves imported branded instrument repairing and maintenance to answer for customer’s demand so that established a good enterprise image among customers.
Similar Product Recommend