Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberXenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test ChamberWater Cooled IR Meter
  • $item.Title
  • $item.Title

Water Cooled IR Meter

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Xenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test Chamber
Place of Origin
HuBei, WuHan
Measure range:0.1M~200GΩDouble display:Digital and analog progress barsRange of testing voltage :2.5KVShort circuit current:≧25mA
Brief introduction



HM2020 water cooled insulation resistance tester is mainly used for insulation resistance test in laboratory or on site. It’s built in high precision microcurrent measurement system and digital booster system. Just need to connect tested object by a HV cable and signal cable to make measurement . It make test automatically , display tested result with big LCD screen, and store the test results accordingly .

Hot tags : water cooled insulation resistance tester, water cooled insulation resistance tester


Main features

1. 32-bit micro-controller, English user interface, easy to operate.

2.Output current, (2500V, the output is greater than 25mA), short-circuit currents greater than 25mA.

3.The high voltage generating module adopts fully closed technology, built in protection resistance, safe and reliable.

4.With strong anti-interference ability, it can meet the field operation of uHV substation.

5.Automatic discharge after testing and real-time monitoring of discharge process.

5.Suitable for measuring the insulation resistance, absorption ratio (R60S/R15S) and polarization index (R10min/R1min) of the water-cooled generator.

6.The measured HV voltage is 2500V.

7.The water polarization potential is automatically compensated and adjusted, even the resistance between the engine base and water collecting pipe less than 10kΩ, it can also ensure accuracy of measurement .

8. With high output power,load resistance between lines and sinks can be as low as 100kΩ,2500V insulation resistance tester can measure as low as 1 m Ω (2500 v).

9. The insulation resistance is indicated by an analog progress bar. The testing process of capacitive test can be observed visually without delay,Logarithmic scale and indicating value run out small, convenient to read .

10.Digital display adopt 3 1/2 LCD digital table.

11.The LCD timer display the test time, and show its minutes, seconds at 0 ~ 32 minutes cycle, the bee beeps every 15 seconds.

12. R15S, R60S, R10min, absorption ratio and polarization index can be automatically measured and memorized for checking and reading when the test is completed.

13. It can compensate and adjust water polarization potential automatically.


Main technical performance

1. Accuracy:±(5%+5 digits) Measure range:0.1M~200GΩ

2. Double display:Digital and analog progress bars

3. Temperature measurement:-25℃~125℃

4. Range of testing voltage :2.5KV

5. Short circuit current:≧25mA Measure time:1min.~10min(related to measurement way )

6. Charge power supply:180~270VAC ,50Hz/60Hz±1% (powered by mains power or generator )

7. Working environment:temperature -10~40℃, humidity 20~80%

Factory release test cargo delivery

-1

Service and Support


1. Factory Release Test

Products are operated in correct way strictly according to production process .

About qualified product, inspector will issue factory test report and certification of quality .

Sub-quality products are prohibitted to leave factory .


2. Providing technical materials

During the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.


3.After-sales service commitment

3.1.99% of all delivered goods will be did factory test before shipping and guarantee that all our goods you get will be running well.

3.2.In case of missing /defective accessories,please notify us no later than 3 days after you receive the goods,then we will arrange re-shipment of the accessories.

3.3. Buyer has to us for the exchange notice before to returning goods,buyer will bear freight&handing fee.

3.4.We offer after-sell service within 1 year of purchase.we would bear the one way freight(from to you place).

Company introduction

Wuhan Goldhome Hipot Electrical Co.,ltd was established in 2008, specially in develop, design and manufacture high voltage testing equipment in China.

Goldhome Hipot’s main products included AC/DC Hi pot Tester, Primary Current Injection, transformer testing device,HV Switch gear Tester ,CT PT analyse,etc.

Our products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.

We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.

-2


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend