Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesWave Recorder
  • $item.Title
  • $item.Title

Wave Recorder

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HuBei, WuHan
Introduction


Wave recorder is a transient signal recording instrument which is developed for the application of power system. The internal software of the instrument preset the test template for generator debugging, the user can easily complete the generator short circuit characteristic test, no-load characteristic test, excitation system disturbance test, excitation system 10% step test, demagnetization constant measurement, self-quasi-synchronization device check, unit load rejection record and so on.

The instrument has rich software components to enable users to carry out graphic analysis, combined operation, effective value calculation, AC power calculation, three-phase symmetry analysis, spectrum analysis, harmonic analysis, curve correlation analysis through software components. Graphic editing and phasor drawing operations. Test data and analysis results can be generated WORD/EXCEL form , it also can be generated by software JPG picture in order to facilitate the user to conduct in-depth analysis and processing of the test results.

The instrument has 12 analog input ,12 active switch input and 3 open output signals. The maximum sampling frequency can reach 100 KHZ, which can basically meet the transient signal recording requirements of various tests in power system. All simulation channels are isolated from each other to avoid the failure of the system under test due to the connection problem of different potential points in the test.


Software Functions and Features

The functions of the instrument include data acquisition, data compression storage, waveform analysis and statistics, graphics drawing tools, spectrum analysis tools, waveform combination operation tools, harmonic analysis, effective value calculation, power calculation, three-phase symmetry analysis, phasor diagram tools and so on

Features are as below:

1. The experiment curve is drawn in real time, and a variety of curve analysis tools are provided, users can scale and locate the curve arbitrarily

2 .The graphics in the current oscilloscope can be edited, including free identification, color transformation and so on, so as to facilitate the test report.

3 .Spectrum analysis tools are provided to enable users to easily obtain spectrum graphics of signals

4 . You can choose the signal as the X axis, Y axis to draw the relationship curve of the signal

5 .A harmonic analysis tool is provided for harmonic analysis of collected signals with a maximum harmonic number of 1024

6 .The combined operation tool enables users to add, subtract, multiply, divide and integrate the collected signals

7. Calculate the effective value and power of the selected channel signal

8. Power and symmetry analysis of selected three-phase signals

9.Phasor diagram of selected signal

10. Select channel signal type by software: DC instantaneous or AC effective

11.The standard test template of generator three-phase short circuit characteristic curve, no-load characteristic curve, excitation system disturbance test, demagnetization time constant, frequency and voltage characteristic, load rejection test, self-alignment simultaneous test is built in. The software automatically calculates the test results.

12.The instrument can automatically generate WORD test reports Excel test reports

13.The test report automatically marks the curve and automates the production of the test report

14.The names and units of all sampling channels can be redefined

15.Automatic storage of test environment and instrument settings for various tests

16.Automatic calculation of test parameters for various test templates

17.Simple and convenient channel filtering

18.Easy to export test data using storage devices such as U disk or hard disk

19.Windows XPE operating system can realize self-protection and recovery of software system and prevent virus attack and erosion

20 .Use anti-shake processing to avoid user error operation

1

Hardware features

The hardware system characteristics and technical parameters of the instrument are as follows:

1. 12 channels low voltage/current analog acquisition, Voltage input range -10 V~10 V, -200 V~200 V, -400 V~400 V, Current input range-20 mA~20 mA, One analog-100 mV~100 mV input channel (100 channel maximum allowable input voltage <10 V)

2.Voltage channel input range, voltage or current signal type selection through software selection

3 .Signal acquisition error: -400V~400V error<0.5V

-200V~200V error<0.2V

-10V~10V error<0.01V

-20mA~20mA error<0.02mA

-100mV~100mV error<0.2mV

4.12 channels active node switch measurement channel, switch signal range DC12-220V

5. 3-way switch output channel, AC220V/1A maximum on/off capacity

6.Separate chassis structure, operating terminal enables users to more easily control test and analysis data

7 .2 USB ports for data download or keyboard/mouse input

8 .12.1 inch large color screen display, touch screen mode to achieve human-computer interaction

9. 8 G Data Storage Space

10.Sampling channel input impedance

-10V~10V Input impedance 820k Ohm

-200V~200V Input impedance 820K Ohm

-400V~400V Input impedance 820K Ohm

-20mA~20mA Input impedance 50 Ohm

-100mV~100mV Input impedance >10M Ohm



  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend