Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterWSLD Electromagnetic Flowmeter
  • $item.Title
  • $item.Title

WSLD Electromagnetic Flowmeter

Winsun Automation Instrumentation Co.Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Flowmeter
Place of Origin
JiangSu, WuXi

Winsun Automation Instrumentation Co.Ltd.

Contact

Mr. Zhao

Phone

13771588070

Fax

86-510-86023310
WSLD Electromagnetic Flowmeter

WSLD Electromagnetic Flowmeter

Introduction

WSLD series electromagnetic flowmeters, composed of sensor and converter, work based on Faraday’s law of electromagnetic induction. It is used to measure electrical conductivity of liquid or solid. Generally, the electrical conductivity should be over 5uS/cm (electrical conductivity of tap water, raw water is about 100-500uS/cm. It can also be used to measure various mediums like acid, alkali, saline solution, paper pulp, ore pulp and so on, but these mediums cannot contain a lot of magnetic materials and bubbles.

Working principle

The principle of the sensor is based on Faraday’s law of electromagnetic induction. It is installed a pair of detection electrodes on the pipe wall, where the measurement pipe axis and magnetic field lines are vertical. When the conductive liquid moves along the measurement pipe axis, the conductive liquid cuts magnetic field lines and produces induced electromotive force, which can be measured by the two electrodes on the meter pipe. The result can be calculated by the formula:

When measuring flow, fluid flows through magnetic field which is perpendicular to the direction of the flow. Then the flow of conductive fluid induces electromotive force proportional to the average velocity. Therefore, the detected fluid requires to be higher than the minimum of electrical conductivity. Its induced voltage signal is detected through two electrodes and sent to a converter through the cable. After signal processing and related operations, WSLD electromagnetic flowmeter will display total flow and instantaneous flow in converter display.

Features

a) Measurement is not affected by changes in fluid density, viscosity, temperature, pressure and tunneling conductivity;

b )There is no flow obstruction in the measuring pipe, no serious damage and low requirement for straight pipe section. ,

c)Series nominal repressor DN6-DN3000. Sensor lining and electrode materials have many choices;

d)The converter adopts a novel excitation mode with low power consumption, stable zero point and high accuracy. Its flow rate can reach 1500: 1:

e)Converters can be integrated or separated from sensors.

f)The converter uses 16-bit high-performance loan processor and 2X16LCD display. It has convenient parameter setting and reliable programming;

g)The flowmeter is a two-way measurement system with three totalizers: positive total, reverse total and total differential: it can display positive and negative flow, and has multiple outputs: current, pulse, digital communication, HART:

h)The converter uses surface mounting technology (SMT), with new functions of self-examination and self-diagnosis:

t)Rubber and polyurethane lining sensors are intrinsic immersion structures:

j) Explosion-proof instruments can be used in corresponding explosion-proof places;

k )WSLD electromagnetic flowmeter is used to measure volume flow of conductive liquid and slurry in closed pipeline. It is suitable for chemical industry, electric power, metallurgy, petroleum, water supply and drainage, paper making, medicine, food and other departments.

Specifications

Maximum velocity

15m/s

Accuracy(Reference accuracy curve)

DN15-DN600

±0.3%(Flow rate≥1m/s)、±0.2%

±3mm/s(Flow rate<1m/s)

ON700- DN3000*

±0.5%(Flow rate≥0.8m/s)

±4mm/s(Flow rate<0.8m/s)

Fluid conductivity

≥5μs/cm

Nominal pressure

DN15-DN150

4.0MPa

DN15-DN600

1.6MPo

DN200-DNI00

I.0MPa

DN700-DN3000

0.6MPa

Environment temperature

Sensor

-25℃-+60℃

Converter and Integral Type

-10℃-+60℃

Maximum temperature of lining materials and fluids

lining materials

Separate type

Integrated type

PTFE

100℃;150℃

70℃

PVF

100℃;150℃

70℃

FEP

100℃;150℃

70℃

CR

80℃;150℃

70℃

PU

80"C

70℃

Signal Electrode Form

Fixed type(DN15-DN2600 ) ,Scraper type (DN300-0N1600 )

Signal Electrode and Ground Electrode Materials

Molybdenum-containing stainless steel, Harrington alloy B, Harrington alloy C, titanium, tantalum, platinum-holmium alloy, stainless steel coated tungsten carbide

Connecting flange material

Carbon Steel

Grounding flange material

Stainless Steel1Cr18Ni9Ti

Imported protective flange materials

DN15-DN600

Stainless Steel1Cr18Ni9Ti

DN700-DN3000

Carbon Steel

Enclosure protection

DN15-DN150 Separate type rubber or Pu lining sensor

IP65、IP68

DN200-DN2600 Separate type rubber or Pu lining sensor

IP65、IP68

Others

IP65

Spacing(Separate type)

The distance between the converter and the sensor is not more than 100m, but special orders are required for more than 100m.

Size(D)

Flow rate (Q) unit (m3/h)

V = 0.3 m/s

V = 6 m/s

V= 10 m/s

mm

inch

Min.

Calibrated

Max.

6

1/4〞

0.0306

0.6

1.018

10

3/8〞

0.0848

1.7

2.826

15

1/2〞

0.1909

4

6.362

20

3/4〞

0.3393

7

11.31

25

1〞

0.5302

11

17.67

32

1-1/4〞

0.8686

17

28.95

40

1-1/2〞

1.358

27

45.24

50

2〞

2.121

42

70.69

65

2-1/2〞

3.584

72

119.5

80

3〞

5.429

109

181.0

100

4〞

8.483

170

282.7

125

5〞

13.26

265

441.8

150

6〞

19.09

382

636.2

200

8〞

33.93

679

1131

250

10〞

53.02

1060

1767

300

12〞

76.35

1527

2545

350

14〞

92.37

2078

3079

400

16〞

135.8

2714

4524

450

18〞

171.8

3435

5726

500

20〞

212.1

4241

7069

600

24〞

305.4

6107

10180

700

28〞

415

8310

13850

800

32〞

542

10860

18100

900

36〞

662

13740

22900

1000

40〞

848

16962

28260

Flange range Q=πD²×V×0.0036÷4

Product selection

WSLD-

Note

Diameter

DNXX

DN6~DN3000(mm)

Structure

F

Remote type (standard with 10m cable)

Y

Compact type

Electrode

S

316L

T

Titanium(Ti)

D

Tantalum(Ta)

C

Hastalloy C(HC)

P

Platinum iridium alloy

Lining material

X

Chloroprene rubber (CR) Suitable for tap water, industrial water, sea water, etc liquid

J

Polyurethane rubber (PU) Suitable for pulp, pulp, etc liquid

E

Polytetrafluoroethylene (PTFE)

A

PFA

Body material

CS

Carbon steel

S4

SUS304

Protection class

L0

IP65(compact type)

L1

IP67(remote type)

L2

IP68(remote type)

Power supply

1

110~240V AC

2

24V DC

3

Lithium battery(no signal output)

Signal output

N

No output

N1

4-20m/pulse output

Communication

H

HART protocol

R1

MODBUS RS485

G

GPRS

With grounding ring

0

Without grounding ring

1

With grounding ring

Nominal pressure

D1

DIN PN0.6(DN700-3000)

D2

DIN PN1.0(DN200-1000)

D3

DIN PN1.6(DN15-600)

D4

DIN PN4.0(DN3-150)

O

Others

Cable length

/xxx

Unit: m

  Located in the Yangtze River Delta region of China, Winsun Automation Instrumentation Co.Ltd. enjoys developed economic conditions and convenient transportation. Taking the advantages on convenient transportation and location, and relying on strong technical supports of hi-tech park, we have experienced rapid development. Up to now, we have become a hi-tech research, development and production company of industrial sensors, instruments, control/monitoring systems and interface products.There are strong technology development strength, and production and processing abilities in our company, and we hire well-known professors and experts in colleges and universities as technical consultants. Through integrating high and new technologies with military manufacturing technologies, we make every effort to be the first choice of you for production and scientific research cooperation! We have provided supporting products for a number of steam turbine, blower and pharmaceutical manufacturers of China; at the same time, we provided a large number of quality products for power, hydro power, oil refining, aerospace, aviation, papermaking and other industries. At present, our sales network covers the most areas of China, and our products are well sold in Europe and the United States, etc. Our eddy current displacement sensor, Vibration velocity sensor, Transmitting protection meter and other products are strictly in accordance with the standards of ISO9001 quality system in research, development, production, inspection and delivery. A strong technical strength of our company is the powerful guarantee of product quality. There are advanced product testing equipments in our company at the same time.Due to stable performance and high precision, our products are widely used in electric power, petroleum, chemical, machinery, electronics and other fields.
Similar Product Recommend