Welcome Customer !

Membership

XwbooElectronic ComponentsSensorTemperature SensorXMT-308 Series Universal Input Type Intelligent Temperature Controller
  • $item.Title
  • $item.Title

XMT-308 Series Universal Input Type Intelligent Temperature Controller

Yuyao Gongyi Meter co.,Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Temperature Sensor
Place of Origin
ZheJiang, YuYao
Short Description:XMT*-308 Series intellgence digital temperature control instrument Instruction ManualⅠ、SummarizeXMT*-308 series intelligent temperature controller, is single row 4-LED display. The controller can input kinds of signals which are used interchangeably, three-button operation, adopts ON/OFF con...

XMT*-308 Series intellgence digital temperature control instrument

Instruction Manual

Ⅰ、Summarize

XMT*-308 series intelligent temperature controller, is single row 4-LED display. The controller can input kinds of signals which are used interchangeably, three-button operation, adopts ON/OFF control and PID control. It can select Fahrenheit and degree centigrade temperature display. It allows an easy parameter setting and convenient inputting, is used widely temperature automatic control systems of machinery、chemical、ceramics、light industrial、metallurgy、petrifaction and heat treatment and so on.

Ⅱ、Main Technical Indexs

1、Measurement deviation:±0.5%F·S±1B,Cold end compensating deviation≤±2℃

2、Input(can be selected):CU50、PT100、K、E、J、T、S

3、Relay output contact capacity:AC220V 5A(resistance load)period 2~120s can be adjusted.

4、Driving solid relay signal output:driving electric current>15m A voltage>9V,period is 2S

5、Power:AC85V~242V,50~60HZ

6、Work environment:temperature 0~50.0℃, relative humidity≤85%RH, without corrode and strong electric radiation.

Ⅲ、Instrument panel and connection scheme(consult)

1

Ⅳ、Technical Indexes

1 2 3

Ⅴ、Flow chart

2

Ⅵ、Operation

1、 Electrify after take into the power, sensor and control circuit according to the connection scheme, and then the instrument start testing itself for 1 second.

2、 Set the setting value

Press ▲or ▼key 3 second enter to the setting value states. press▲or ▼key to modify,for long time to press the key can accelerate. After modification, press SET to save and exit. if you don’t do this operation, it can be done itself.

3、 Interior Technical parameter setting(Technical parameter refer to the sheet)

(1) The first menu

Press SET key 3 second enter into the first menu, the window display parameter code then display parameter value. Press▲or ▼key to modofy,for long time to press the key can accelerate. .After modification, press SET key to save and enter into next Indexs setting. if you don’t do this operation, it can be done itself.

(2)The second menu Press SET & ▲ key to enter into the second menu, and the setting method is the same as the first menu.

4. Set by itself

First ,set the setting value, and enter the menu, set to , and the AT light turn on,the meter enter the condition setting itself,this time the meter adopt on/off control mode, after three times surge(first time, measure value and display by turns; second time, measure value and display by turns; second time , measure value and display by turns),the meter confirm new、、 and save it, the meter reset and(display、 by turns) enter control condition.

Ⅶ、Model Sense

XMT□— 3 □ 8 □

1 2 3 4 5

1:External size and Installation hole(mm)

Empty: 160×80×90 152×76 A: 96×96×90 92×92

D: 72×72×90 68×68 E: 48×96×90 44×92

F: 96×48×90 92×44 G: 48×48×100 44×44

S: 80×160×90 76×152 B: 60×120×90 56×116

K: 48×24×80 44×21 FC: 77×35×76 71×29

L:35mm DIN guide rail installation C:80×120×35 wall set installation

2.Operation display method:‘3’ 3-key soft push-switch setting, single row digital display, have PID adjustment or ON/OFF control

3: An additional alarm: ‘0’indicates no alarm;‘1’upper limit touch alarm;‘2’ lower limit touch alarm

4:Input signal classification: ‘8’input signal can interchange free

5:Suffix: empty:relay output G:solid state relay output

A:mono-phase over zero trigger output

Ⅷ、Fault Analysis and Clearance

XMT*-308 adopts advanced production process, and has the strict test before leaving factory, it improve the reliability of the meter .The usual fault is caused by the wrong operation or parameter setting .If you find the fault couldn’t be cope with, please record it,and contact with the agent or us. Sheet 8-1 is the usual fault of XMT*-308 in the daily application:

Sheet 8-1 Common fault handling

zh

Attached 1:Statement of meter’s parameter attention letter and English letter

2



  Yuyao changjiang Temperature Meter Factory (Yuyao Gongyi Meter co.,Ltd.) is an enterprise group which is dominated by high technology and integrates technical design, manufacturing, sales and marketing. The company was founded in 1995 , Has been the temperature controller-led products, has accumulated more than 20 years of production and application experience; company is the leading manufacturer of domestic temperature controller manufacturers, the annual production and sales of temperature controllers over 500,000 , the company has Modern production equipment, including automatic computer chip machine production lines, lead-free dual-wave soldering machine and other production equipment pipeline.
Similar Product Recommend