Membership
Help
Sinocera Piezotronics Inc.
Sinocera Piezotronics Inc.
Product main technical indicators:
Vibration measurement parameters | |
Vibration direction | Single axis (three axes can be customized) |
Acceleration range | ± 25g (other ranges can be customized) |
Acceleration frequency range | 0.5-5000Hz ( up to 10kHz) |
measurement accuracy | ± 0.5% × F · S ( RMS ) |
Speed frequency response | 10-1000Hz (can be customized 4-5kHz ) |
Speed range | 35mm / s |
ADC | 16bit |
Sampling frequency | 20kHz , up to 32k |
sampling interval | 5 minutes (recommended sampling interval for external power supply) / 2 hours / 4 hours / 8hours |
sampling time | 0.5 seconds / 2 seconds / 2 seconds , can be arranged |
output signal | Acceleration, speed, displacement (there is an error in displacement measurement, it is not recommended to use the measured displacement of this sensor as a diagnostic basis) |
Temperature measurement parameters | |
Range | -40 ~ 120 ℃ |
Enter | PT1000 |
Measurement error | ± 1 ℃ |
Electrical and structural parameters | |
powered by | 5V power supply |
way of communication | 485 , modbus protocol |
Transmission rate | The default is 9600bps , the highest is 115200; |
Communication distance | 100m or more |
Mounting thread | 1 / 4-28 |
weight | Within 200g |
Environmental and protection parameters | |
Operating temperature | -40 ℃ to 80 ℃ |
Working humidity | Less than 95% RH |
Protection class | Above IP65 |