Membership
Help
Sinocera Piezotronics Inc.
Sinocera Piezotronics Inc.
Vibration measurement parameters | |
Vibration direction | Single axis (three axes can be customized) |
Acceleration range | ± 25g (other ranges can be customized) |
Acceleration frequency range | 0.5-5000Hz ( up to 10kHz) |
measurement accuracy | ± 0.5% × F · S ( RMS ) |
Speed frequency response | 10-1000Hz ( 4-5KHz range can be customized ) |
Speed range | 35mm / s |
ADC | 16bit |
Sampling frequency | 20kHz , up to 32k |
sampling interval | 5 minutes (recommended sampling interval for external power supply) / 2 hours / 4 hours / 8 hours |
sampling time | 0.5 seconds / 2 seconds / 2 seconds , can be arranged |
output signal | Acceleration, velocity, and displacement characteristic values (there is an error in displacement measurement, it is not recommended to use the measured displacement of this sensor as a diagnostic basis) |
Temperature measurement parameters | |
Range | -40 ~ 120 ℃ |
Enter | PT1000 |
Measurement error | ± 1 ℃ |
Electrical and structural parameters | |
powered by | 3.6V lithium battery |
Continuous working time | More than 2 years (interval transmission, for example, once every 2 hours) |
way of communication | Lora 433 |
Transmit power | 20dB |
Communication distance | 0.7km (10dB), 1.6km (20dB) (open area) |
Mounting thread | 1 / 4-28 |
weight | Within 200g |
Environmental and protection parameters | |
Operating temperature | -40 ℃ to 70 ℃ |
Working humidity | Less than 95% RH |
Protection class | Above IP65 |
Receive gateway parameters | |
communication method | Network port communication |
Maximum supported nodes | Uploaded every 5 minutes, each gateway supports up to 50 nodes |
working frequency | 410-470M , dual antenna mode, support two frequency band access |
Protection class | IP64 |