Welcome Customer !

Membership

XwbooElectrical & ElectronicsElectric Heating EquipmentThermal ResistanceZ43H Medium Pressure Flat Gate Valve
  • $item.Title
  • $item.Title

Z43H Medium Pressure Flat Gate Valve

SHANGHAI BAIGANG VALVE GROUP CO., LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Thermal Resistance
Place of Origin
ShangHai, ShangHai
Z43H Medium Pressure Flat Gate ValveProduct overviewProduct model: Z43HNominal diameter: DN50~500mmNominal pressure: PN0.4 ~ 2.5MPaApplicable medium: waterDrive mode: manualConnection type: flangeMain material: cast steelSeal form: hard seal type

Z43H Medium Pressure Flat Gate Valve produced and sold by Baigang valve group for natural gas, petroleum, chemical, environmental protection, urban pipelines, gas pipelines and other pipeline, venting system and steam storage device, used as hoist equipment. Z43 single gate with diversion gate plate valve for natural gas extraction and purification of long-distance pipeline. 


Z43H Medium Pressure Flat Gate Valve features:
 1. Sealing structure of the valve seat should be elastic pre-tightening, upstream and downstream sealing seat seal structure at the same time. Seat and seal are always face-to-face seals. 
 2. Seat has a self-cleaning function, and the valve is opened or closed during the direct flow of air erosion. Seat should be made of lubricated, non-abrasive material. 
 3. Valve actuator failure does not affect the rest of the valve, maintenance and replacement work can be carried out without removing the valve. 
 (1) Yoke Sleeve - The aluminum bronze yoke sleeve is equipped with a needle thrust bearing to minimize operating torque. 
 (2) Stem - thread length up to bracket; pin and spot welding; stable. 
 (3) Pressure Sealed - Simple to assemble, with sectional buckle and silver-plated mild steel washers to help disassemble and achieve the best bonnet seal. 
 (4) Seat Ring - Welded seat ring is perpendicular to the flow path for easy maintenance. 
 (5) Actuators - These valves can be equipped with electric, hydraulic or pneumatic actuators. DN300 following the standard configuration handwheel, DN350 above configuration helical gear operating mechanism. 
 (6) Yoke - The fully assembled yoke passes the seismic test for easy maintenance and installation of the actuator. 
 (7) Gland - Two-piece, self-adjusting gland to avoid being ejected. 
 (8) overall rear seat - hard surface, the longest service life. 
 (9) Flap - The spring-loaded flap regulates itself to reduce actuator torque demand. 
 (10) The overall stop - the overall casting bracket stopper device, positioning the assembly of the bracket valve, making the valve seat more stable and reliable. 


Z43H Medium Pressure Flat Gate Valve executive Standard:

Design specifications

Structure length

Connect the flange

Test and inspection

Pressure - Temperature

Product Identification

JB / T5298

JB / T5298

JB / 79

JB / T5298

GB9131

GB / T12220

API6D

API6D

ANSI-16.5

API6D

ANSI B16.34

MSS SP-25


Z43H Medium Pressure Flat Gate Valve product Performance Specifications:

Design level

Test pressure at room temperature (MPa)

Applicable temperature ℃

Suitable media

case

Left seal

Left seal

Low pressure seal

"G" type

"D" type

normal type

"Anti-sulfur" type

"Basic" type

PN (MPa)

1.6

2.4

1.76

1.76

0.6

-29 ~ 50

-45 ~ 21

-2 to 121

H2S and CO2
total content
of more than
500mg / m2 media

Oil and gas,
water and so on

2.5

3.75

2.75

2.75

0.6

4.0

6.0

4.4

4.4

0.6

6.4

9.6

7.04

7.04

0.6

Lb

150

3.0

2.2

2.2

0.6

300

7.7

5.6

5.6

0.6


Z43H Medium Pressure Flat Gate Valve main parts and materials:

Valve / bonnet

WCB

WC6

A352-LCB

A351-CF8M

gate

2Cr13 + ENP

20CrMoV + STL

ANSO410 + ENP

ANSI316 + ENP

Valve stem

2Cr13

2Cr13

A182-A6a

A182-A316S

Seat

25 + PTFE

20CrMoV + STL

A105 + PTFE

A182-F316 + PTFE

filler

NBR / FPM

Flexible Graphite

Teflon / PTFE + FPM


Gasket

-

bolt

35

35CrMo

A193-B7M

A193-B8

Suitable media

Water, oil port, steam

Steam, oil

Propane, ethylene

Nitric acids



  Shanghai Baigang Valve Group Co, Ltd. The original Shanghai Baigang Valve Machinery Factory was founded in 1998, is a valve manufacturer with more than 20 years of high-end valvetechnology in Shanghai, after years of construction and accumulation of development, restructuring Rongsheng Group Co, Ltd. Group registered capital of 61 .88 millin yuan, the groupheadquarters is located in Shanghai Jinshan District, Shanghai valve brand, one of China's valve brands, is a collection of scientific research, casting/forging, production, sales and service in oneof the modern professional valve manufacturing enterprises.Shanghai Baigang Valve Group Co., Ltd.(abbreviation: Baigang Valve Group)Main business valve brands: Baigang brand BAIGANG, SHBG, BGVG, currently the group has five subsidiary valve andactuator brands, under the control of more than 10 professional companies and more than 30 strategic agreement partner companies, forming a dedicated professional product supplychain;Group headquarters factory is located in industrial park, the main production and industrial automation control valve valve, etc, in order to develop the best steel group, realize powerstel brand valves intelligent manufacturing towards the world, owns autonomous system, strict control of product quality management system and the three major production bases located inzhejiang corrosion resistant material and metal steel valve base, the base for tianjin rubber valve, hydraulic valve in fujian province, to scientific research and technology innovation as the core,the manufacturing system of quality control system as the center.The company adhere to the quality first, honesty, open up the market as the business philosophy to create a strong Baigangvalve group and national brand;Baigang high quality valves, automatic control equipment and accessories, mechanical equipment and other products are mainly used in chemical industry,natural gas, petroleum, power station, metallurgy, water conservancy engineering, environmental protection, water treatment, pharmaceutical and other fields.Since its establishment, the company has been adhering to the people-oriented, harmonious and win-win management philosophy, advocating humanized management, creating a good spacefor the development of all kinds of talent, talent is the foundation of the development of the company.The company and the major production bases have all kinds of mechanical processingequipment and perfect physical and chemical testing and performance testing equipment as well as rigorous management mode, to ensure that we can eficiently produce high-quality high-endvalves and automation control equipment and mechanical equipment products.
Similar Product Recommend