Welcome Customer !

Membership

XwbooGeneral Machinery Valve Regulating ValveZDLS Electronic Electric Angle Regulating Valve
  • $item.Title
  • $item.Title

ZDLS Electronic Electric Angle Regulating Valve

SHANGHAI BAIGANG VALVE GROUP CO., LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Regulating Valve
Place of Origin
ShangHai, ShangHai
ZDLS Electronic Electric Angle Regulating ValveProduct overviewProduct model: ZDLSNominal diameter: DN20~300mmNominal pressure: PN1.6~6.4MPaOperating temperature: ordinary -40 ~ 230℃;Heat sink type 230 ~ 450℃, special order 450 ~ 600℃Main material: ZG230-450, ZG1Cr18Ni9Ti, 316, 316L, wear resistant alloy, etcDrive mode: electricDesign standard: GB/T17213Inspection standard: GB/T4213Flange standard: JIS B220, JB/T79, ANSI B16.5-1981, GB/T9113, HG20594-97, HG20618-97, etc

ZDLS Electronic Electric Angle Regulating Valve produced and sold by Baigang valve group by the PS series and the 3610 series of straight-stroke electric actuator and low flow resistance through the single-seat valve. Electric actuator for the electronic integration structure, with a servo amplifier, the input control signal (4-20mADC or 1-5VDC) and the power to control the valve opening, to pressure, flow, level, temperature and other parameters adjust. With sensitive action, simple connection, large flow, small size, high regulation accuracy. Angular pressure regulating valve is aimed at regulating valve in the high pressure or high pressure, severe cavitation, erosion under harsh working conditions, short life, easy to break the stem, easy to fall off the serious problems of research and development of products. It uses multi-stage throttling form to apportion the pressure difference, reduces the cavitation, the erosion, the deflection damage, greatly enhanced the service life of the regulating valve, especially in the urea system life expectancy than the ordinary high-pressure valve enhances 2-3 times . The valve body is right angle, the valve core is a single guide structure, the flow path of the valve body is simple and the resistance is small. It is especially suitable for the adjustment of fluids with high viscosity and containing suspended matter and granular media to prevent coking, sticking and clogging.
 

ZDLS Electronic Electric Angle Regulating Valve main technical parameters

Nominal diameter (mm)6101525
Seat diameter (mm)34645781067810127810121620
Flow coefficient Kv0.040.10.10.40.411.62.546.38
0.160.40.1611.62.50.6311.62.54
0.0630.250.250.63
Nominal diameter (mm)3240506580100125150200
Seat diameter (mm)16203020383050386550806510065125100150125200
Flow Coefficient6.3816825164025634010063160100250160400250600
Adjustable rangeR = 20: 1 for Kv values <18 and R = 30: 1 for Kv values> 18
Nominal pressure1.6, 4.0, 6.4, 10, 16, 22, 32 MPa
Spool formSleeve-guided single-seat spool valve
Flow characteristicsstraight line
The role of formElectric open, electric customs
Operating temperatureOrdinary -40 ~ 230 ℃; heat sink type 230 ~ 450 ℃, special order 450 ~ 600 ℃
Flange standardIn line with JB / T2769-92 standards, according to ANSI, JIS, DIN and other orders for the production
control signal4 ~ 20mA.DC; 1 ~ 5V.DC; 0 ~ 10V.DC (with the implementation of the agency)
power supplyS220V.AC, 50HZ; 380V.AC, 50HZ (with the implementation of the agency)


Nominal diameter (mm)202540506580100150200250300
Seat diameter (mm)10121520253240506580100125150200250300
Flow coefficient Kv1.62.546.3101625406310016025040063010001600
Adjustable range30: 1
Nominal pressureStandard products 1.6,4.0,6.4 MPa;
Spool formSingle-seat spool valve
Flow characteristicsStraight line, equal percentage
Operating temperatureOrdinary -40 ~ 230 ℃; heat sink type 230 ~ 450 ℃, special order 450 ~ 600 ℃
Flange standardMeet the JB78-59, JB79-59 standards, according to JB / 79.1-94, JB / 79.2-94, ANSI, JIS, DIN and other orders for the production

Note: The working temperature, the nominal pressure, the nominal diameter of the products beyond the scope of the list can be resolved with the business negotiations.
 

ZDLS Electronic Electric Angle Regulating Valve performance indicators

Leakage rate: Class IV, less than 10-4 rated flow

Back to the difference: with 3610L actuator is 2.0%;

With PSL actuator is 1.0% Basic error:

With 3610L actuator is ± 2.5%;

With PSL actuator is ± 1.0%

Note: The test packing used for the standard PTFE packing.


ZDLS Electronic Electric Angle Regulating Valve main dimensions

Nominal diameter (mm)20253240506580100125150200
L1 (mm)98105105120135190225270315367
L2 (mm)PN1.6MPa8595115115130145155175200240300
PN4.0MPa8595115115130145155175200240300
PN6.4MPa100115130130150170190215250275325
With PSLH (mm)normal type753761789778793819858893921951956
Heat sink type88389191990892389210211056112011501156
D (mm)176
Weight (KG)13.522.525.529.5506078119157255
With 361LH (mm)normal type51654255268874478381897610061036
Heat sink type646654682818907946981117512051235
D (mm)225310
Weight (KG)2130334145657593172210308

Note: The data in this table is standard configuration data, which will vary with actuator configuration.



  Shanghai Baigang Valve Group Co, Ltd. The original Shanghai Baigang Valve Machinery Factory was founded in 1998, is a valve manufacturer with more than 20 years of high-end valvetechnology in Shanghai, after years of construction and accumulation of development, restructuring Rongsheng Group Co, Ltd. Group registered capital of 61 .88 millin yuan, the groupheadquarters is located in Shanghai Jinshan District, Shanghai valve brand, one of China's valve brands, is a collection of scientific research, casting/forging, production, sales and service in oneof the modern professional valve manufacturing enterprises.Shanghai Baigang Valve Group Co., Ltd.(abbreviation: Baigang Valve Group)Main business valve brands: Baigang brand BAIGANG, SHBG, BGVG, currently the group has five subsidiary valve andactuator brands, under the control of more than 10 professional companies and more than 30 strategic agreement partner companies, forming a dedicated professional product supplychain;Group headquarters factory is located in industrial park, the main production and industrial automation control valve valve, etc, in order to develop the best steel group, realize powerstel brand valves intelligent manufacturing towards the world, owns autonomous system, strict control of product quality management system and the three major production bases located inzhejiang corrosion resistant material and metal steel valve base, the base for tianjin rubber valve, hydraulic valve in fujian province, to scientific research and technology innovation as the core,the manufacturing system of quality control system as the center.The company adhere to the quality first, honesty, open up the market as the business philosophy to create a strong Baigangvalve group and national brand;Baigang high quality valves, automatic control equipment and accessories, mechanical equipment and other products are mainly used in chemical industry,natural gas, petroleum, power station, metallurgy, water conservancy engineering, environmental protection, water treatment, pharmaceutical and other fields.Since its establishment, the company has been adhering to the people-oriented, harmonious and win-win management philosophy, advocating humanized management, creating a good spacefor the development of all kinds of talent, talent is the foundation of the development of the company.The company and the major production bases have all kinds of mechanical processingequipment and perfect physical and chemical testing and performance testing equipment as well as rigorous management mode, to ensure that we can eficiently produce high-quality high-endvalves and automation control equipment and mechanical equipment products.
Similar Product Recommend