Membership
Help
Qingdao Yosion Intelligent Technology Co.,Ltd.
Qingdao Yosion Intelligent Technology Co.,Ltd.

Zirconium Crucible
The purity of zirconium crucible is 99.6%, the density is 6.51g/com3, and the maximum service temperature is 2200 ℃. It is mainly used for smelting precious metals. It has good thermal stability and is an ideal high temperature refractory.
Zirconium is a metal with strong corrosion resistance and is widely used in chemical corrosion-resistant equipment. Its acid resistance is lower than that of titanium and various steels, and is close to tantalum. Zirconium has excellent corrosion resistance in all concentrations and temperatures up to the boiling point of hydrochloric acid, and is not prone to crevice corrosion, pitting corrosion and stress corrosion.
Zirconium can withstand the boiling point of sulfuric acid and is higher than the boiling point, and the concentration can reach 70%. Zirconium can resist certain highly corrosive environments including various inorganic acids (hydrochloric acid, sulfuric acid, nitric acid, etc.), alkalis, and most organic acids (such as hydrochloric acid) , Formic acid, etc.) various salt solutions and molten alkali. The corrosion resistance in sodium hydroxide medium is the same as that of nickel.

Zirconium crucible specifications:10-200ml , straight or tapered, with or without cover, customization is available.
Process: hot rolled, cold rolled, pickled and cut.

Crucible can be divided into graphite crucible, clay crucible and metal crucible.
1. Graphite crucible can be divided into three types: ordinary graphite crucible, special-shaped graphite crucible and high-purity graphite crucible.Graphite crucible has good thermal conductivity and high temperature resistance, small coefficient of thermal expansion, acid and alkali corrosion resistance, and excellent chemical stability. It is widely used in smelting alloy tool steel and nonferrous metals and alloys.
2. The clay crucible adopts hard kaolinite skeleton clinker after calcination. In recent years, high temperature resistant synthetic materials, such as silicon carbide, alumina, Emery and ferrosilicon, have been used as the skeleton clinker of crucible. This kind of clinker has a significant effect on improving the quality of crucible products and enhancing the density and mechanical strength of crucible.
3. The nickel crucible is suitable for melting samples of NaOH Na2O2, Na2CO3 NaHCO3 and alkaline solvent containing KNO3, but not suitable for fusing samples of acidic solvents such as KHSO4 or NAHSO4, K2S2O7 or NA2S2O7, and sulfur-containing alkaline sulfide fluxes.
4. The quartz crucible can be used below 1450 ℃ with the advantages of high purity, high temperature resistance, large size, high precision, good heat preservation, energy saving and stable quality.
5. The porcelain crucible can be heat-resistant about 1200 degrees, which is suitable for melting k2s2O7 and other acidic materials.
6. Alumina crucible is hard and resistant to melting. It is suitable for melting samples with weak basic substances such as anhydrous NA2CO3, etc., but not suitable for melting samples with strong basic substances such as NA2O2, NaOH and acidic substances (such as k2s207, etc.).

