FAQ: Capacitive Level Switch
1. How does a capacitive level switch work?
A capacitive level switch detects material presence by measuring changes in electrical capacitance between the sensor probe and the vessel wall.
- When the probe is uncovered, the dielectric is air (low capacitance).
- When covered by liquid/powder (higher dielectric constant ≥1.5), capacitance increases, triggering a switch output (on/off) to indicate the level.
2. What types of materials can it detect?
It works with a wide range of media, including:
- Liquids: epoxy resin, hydraulic oil, grease, PU adhesive, ink, asphalt, edible oil
- Solids/powders: lime powder, cement, metal powder, flour, medicinal powder
Both conductive and non-conductive materials are supported.
3. Can it handle viscous or sticky materials like epoxy resin?
Yes. Its frequency-sweep technology and adjustable damping time (0–5s) minimize false triggers caused by residue buildup on the probe, making it ideal for high-viscosity applications like dispensing machines and potting processes.
4. What are the process temperature and pressure limits?
- Standard process temperature: -40°C to 115°C
- Standard process pressure: -0.1 MPa to 10 MPa
This allows use in demanding applications like oil filtration equipment and high-pressure tanks.
5. What mounting positions are possible?
It supports installation from the top, bottom, or side of tanks/vessels, offering flexibility for different system designs (e.g., side-mounted in oil filters, top-mounted in resin tanks).
6. What are the wetted parts made of ?
Wetted components are available in:
- PEEK
- 304 stainless steel
- 316L stainless steel
Surface roughness is Ra < 0.8 μm for easy cleaning and reduced material adhesion.
7. What is the IP rating?
It has an IP67 protection rating, making it dust-tight and resistant to water ingress. It can operate in environments with up to 98% RH, including condensing conditions.
8. How fast is the response time?
The response time is 0.2 seconds, with adjustable damping (0–5s) to filter out noise from turbulence, foam, or splashing in agitated tanks.
9. What is the accuracy and repeatability?
- Measuring hysteresis: ±1 mm
- Repeatability: ±5 mm
This ensures consistent and reliable point-level detection.
10. Does it have moving parts?
No. Unlike float kevel switches, it has no mechanical moving parts, so there is no risk of jamming, wear, or failure in dirty, viscous, or high-cycle applications.