Welcome Customer !

Membership

XwbooGeneral Machinery Valve Regulating ValveZZWPE Self-electric Temperature Control Valve
  • $item.Title
  • $item.Title

ZZWPE Self-electric Temperature Control Valve

SHANGHAI BAIGANG VALVE GROUP CO., LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Regulating Valve
Place of Origin
ShangHai, ShangHai
ZZWPE Self-electric Temperature Control ValveProduct overviewProduct model: ZZWPENominal diameter: DN15mm~200mmNominal pressure: 1.6, 4.0MPaApplicable medium: steam, water, oil, gasFlange standard: cast iron flange according to GB4216-84, cast steel flange according to GB9113-88

ZZWPE Self-electric Temperature Control Valve product description:

ZZWPE Self-electric Temperature Control Valve (for larger caliber and thermal oil control) produced and sold by Baigang valve group, the valve features only the most common 220V power supply, the use of the media itself is adjusted to the energy directly to the steam, hot water, hot oil and gas and other media The temperature of the implementation of automatic regulation and control, can also be used to prevent overheating or heat exchange occasions, the valve structure is simple, easy to operate, the selection of a wide range of temperature control, fast response time, reliable sealing performance, and can be adjusted during operation , Which is widely used in chemical, petroleum, food, textile, hotels and restaurants and other departments of hot water supply.


ZZWPE Self-electric Temperature Control Valve part Information:

◆ Structure and Principle
Control valve consists of main valve, intelligent actuator and sensor composed of three parts, according to user needs, respectively, heating and cooling of two structures. 
1. The structure and principle of the heating control valve, see the attached diagram: 
Before work, the main valve core is in the half-open position and the sensor is in a natural state. Connect the power, the main spool fully open. The medium flows into the main valve body in the direction of the arrow, and the heat storage tank is heated by the valve core. When the temperature rises to the corresponding set value, the sensor generates a corresponding linear signal input integrated intelligent actuator, then drive the stem, the valve spool displacement, turn off the main valve to stop heating. When the temperature is lower than the set value, the sensor generates a linear signal input to the actuator, which drives the valve element to be involute, allowing the medium to flow into the thermal storage tank according to the parabolic characteristic and heating up to the set value. This controlled media is always in the set temperature range is controlled, so as to achieve the purpose of temperature control. 

Outline drawing 
(1) Intelligent actuator 
(2) Main valve body 
(3) Sensor 
(4) Capillary tube 
(5) Manual mechanism 
Remarks: It is often said that the heating type, cooling type. In this valve as long as the spool structure can be replaced.


ZZWPE Self-electric Temperature Control Valve technical Parameters:

◆ The main parameters and materials

1, the main parameters table

Nominal diameter (mm)

15

20

25

32

40

50

65

80

100

125

150

200

Nominal pressure PN (MPa)

1.6 4.0

Flow capacity (m 3 / h)

5

7

10

16

25

40

63

100

160

250

400

630

Rated travel (mm)

6

8

10

14

20

30

30

40

Temperature adjustment range (℃)

0 to 120: 100 to 250

Adjustment accuracy (℃)

± 1 ~ ± 5

Use media

Steam, water, oil, gas

allow

Leakage

Hard seal

10 -4 X valve rated capacity

Soft seal

"0"

Capillary length

3m, 5m, 10m

Warm package into the depth

270, 430, 630

Coupling thread

3/4 "1"


◆ supporting the use of electric actuators related technical parameters

Nominal diameter DN (mm)

20

25

32

40

50

65

80

100

125

150

200

Electric actuator model

normal type

ZAZ-60

DKZ-310

ZAZ-60

DKZ-310

DKZ-410

DKZ-410

DKZ-510

Electronic type

JHZAZ1

JHZAZ2

JHZAZ3

JHZAZ3

Electric Actuator Thrust (N)

normal type

400

4000

400

4000

6400

6400

16000

Electronic type

2000

4000

6000

8000

The whole trip

time

(S)

normal type

12.5

20

32

48

Electronic type

30

30

48

60

Power consumption (W)

normal type

28

35

Electronic type

6

15

25

40

* The table data is only conventional configuration, the specific selection based on the main parameters and user requirements.

ZZWPE Self-electric Temperature Control Valve connection standard:

◆ connection size and standard
· Flange standard: Cast iron flange according to GB4216-84, Cast steel flange according to GB9113-88 
· Flange sealing surface type: PN10, PN16 convex PN40, PN64 concave surface, the valve body is concave 
· Structure length: GB12221-89 Jacket 
Insulation Jacket Heating Body Interface: Butt Weld φ18 × 4 
* The body flange and flange end face distance can be manufactured according to user-specified standards. Such as ANSI, JIS, DIN and other standards. 
◆ Ordering Information When 
ordering, please provide the following information: 
· Control valve name and model 
· Nominal diameter (mm) 
· Nominal pressure (MPa) 
· Rated flow coefficient (Kv) 
· Fixed flow characteristics 
· Media name, valve pressure, temperature , Flow rate, etc. 
· The whole machine mode of operation (electric open, electric) and the input signal 
· Body, valve trim and packing material 
· Accessories (manipulators, servo amplifiers, etc.) 
· Other special requirements



  Shanghai Baigang Valve Group Co, Ltd. The original Shanghai Baigang Valve Machinery Factory was founded in 1998, is a valve manufacturer with more than 20 years of high-end valvetechnology in Shanghai, after years of construction and accumulation of development, restructuring Rongsheng Group Co, Ltd. Group registered capital of 61 .88 millin yuan, the groupheadquarters is located in Shanghai Jinshan District, Shanghai valve brand, one of China's valve brands, is a collection of scientific research, casting/forging, production, sales and service in oneof the modern professional valve manufacturing enterprises.Shanghai Baigang Valve Group Co., Ltd.(abbreviation: Baigang Valve Group)Main business valve brands: Baigang brand BAIGANG, SHBG, BGVG, currently the group has five subsidiary valve andactuator brands, under the control of more than 10 professional companies and more than 30 strategic agreement partner companies, forming a dedicated professional product supplychain;Group headquarters factory is located in industrial park, the main production and industrial automation control valve valve, etc, in order to develop the best steel group, realize powerstel brand valves intelligent manufacturing towards the world, owns autonomous system, strict control of product quality management system and the three major production bases located inzhejiang corrosion resistant material and metal steel valve base, the base for tianjin rubber valve, hydraulic valve in fujian province, to scientific research and technology innovation as the core,the manufacturing system of quality control system as the center.The company adhere to the quality first, honesty, open up the market as the business philosophy to create a strong Baigangvalve group and national brand;Baigang high quality valves, automatic control equipment and accessories, mechanical equipment and other products are mainly used in chemical industry,natural gas, petroleum, power station, metallurgy, water conservancy engineering, environmental protection, water treatment, pharmaceutical and other fields.Since its establishment, the company has been adhering to the people-oriented, harmonious and win-win management philosophy, advocating humanized management, creating a good spacefor the development of all kinds of talent, talent is the foundation of the development of the company.The company and the major production bases have all kinds of mechanical processingequipment and perfect physical and chemical testing and performance testing equipment as well as rigorous management mode, to ensure that we can eficiently produce high-quality high-endvalves and automation control equipment and mechanical equipment products.
Similar Product Recommend