Welcome Customer !

Membership

XwbooGeneral Machinery Valve Pressure Reducing ValveZZYP self-operated pressure reducing valve
  • $item.Title
  • $item.Title

ZZYP self-operated pressure reducing valve

Wuyue Pump & Valve Group Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Pressure Reducing Valve
Place of Origin
,
ZZYP self-operated pressure reducing valve
Note: Our Products Can Be Customized According To Customers' Needs. In Addition To National Standards,We Can Design And Manufacture According To American Standards, Japanese Standards, German Standards, Russian Standards, British Standards And So On.

Main model

Single seat pressure closed typeZZYP-16~64BSingle seat pressure closed typeZZYP-16~64K
Two-seater press-to-close typeZZYN-16~64BTwo-seater press-to-close typeZZYN-16~64K
Sleeve pressure closed typeZZYM-16~64BSleeve pressure closed type

ZZYM-16~64K

Note:

1. Pressure-closing type is used for pressure adjustment behind the valve. When the pressure behind the valve rises, the valve is closed to achieve the purpose of reducing pressure and stabilizing.

2. The pressure opening type is used for pressure adjustment behind the valve. When the pressure behind the valve rises, the valve opens to achieve the purpose of pressure relief and stabilization.

The main technical parameters

Nominal diameter DN (mm)20253240506580100125150200
Valve seat diameter DN (mm)10121520
Rated flow coefficient Kv1.82.44.441120304875120190300480760
Allowable pressure difference (MPa)2.52.01.61.0
Nominal pressure (MPa)1.6 4.0 6.4
Inherent flow characteristicsOpen fast
The minimum pressure difference P (MPa) to ensure the normal operation of the pressure regulating valve0.05
Pressure range (KPa)15~50 40~80 60~100 80~140 120~80 160~220 200~260 240~300 280~350 330~400 380~450 430~500 480~560 540~620 600~700 680~800 780~ 900 800~1000 900~2000
Working temperature °CLiquid ≤140; Gas ≤80; with condenser and heat sink ≤350
Suitable mediumGas, steam, low viscosity liquid
Flange size and typePN10, 16, 40GB9113-88, PN64JB/T7-94; PN10, 16 male, PN40, 64 female or other standard flanges according to user requirements (such as ANSI, JIS, DIN and other standards) 
Structure lengthAccording to GB12221-89 standard
Can be equipped with accessoriesCondenser (used when the medium is steam), heat sink, etc.
Actuator signal interfaceInternal thread M16×1.5

Note: The pressure range can be designed according to user requirements.

[ZZYP self-operated pressure reducing valve] main performance indicators Note

control precision%±8
Allowable leakageHard seal (L/H)Single seat (grade Ⅳ): ≤10-4 rated capacity of valve: double seat, sleeve (grade Ⅱ), ≤5×10-3×rated capacity of valve
Soft seal (ml/min)DN (mm)
20253240506580100125150200
0.150.30.450.60.91.74.06.75

Dimensions and weight

ZZYP self-operated pressure reducing valve ] pressure adjustment steps

Follow the steps below to slowly turn the adjusting screw to complete the setting. Improper adjustment operations may cause water hammer or banging sound, etc., which may cause damage to the pressure reducing valve or other equipment.

(1) Close the front and rear shut-off valves of the pressure reducing valve. Under the condition that the safety valve does not jump, open the bypass line shut-off valve and keep it for sufficient time to complete the purging and removal of foreign matter or rust layer in the pipeline by the circulating medium. . After the purge is complete, close the bypass line shutoff valve.

(2) Slowly open the shut-off valve installed in front of the pressure reducing valve, and adjust the opening degree of the shut-off valve after the pressure reducing valve to maintain a small flow through the pipeline.

(3) Loosen the lock nut, slowly turn the adjustment screw, and observe the pressure gauge behind the valve until the required setting is planted (clockwise rotation pressure rises, counterclockwise rotation pressure drops). For models with handles, since the handle is in the self-locking position under normal conditions, when adjusting the pressure, you should first press down on the handle, loosen the self-locking, and then slowly turn the adjusting screw, and observe the pressure gauge closest to the valve until The required setting is planted (when the handle is turned clockwise, the pressure behind the valve rises; when the handle is turned counterclockwise, the pressure behind the valve drops.).

(4) Slowly open the pressure reducing valve and then shut off the valve, and follow the steps

(3) Further adjust the pressure after the valve until the required setting is planted.

(5) After finishing the adjustment, tighten the lock nut. For models with handles, pull out the handle and use the internal device to lock it; if the handle is not locked, turn the handle left and right to complete the self-locking action.

Reference example of pressure reducing valve installation configuration:

Shanghai Wuyue Pump & Valve Group Co., Ltd. was founded in 2008. It is a high-tech enterprise specializing in technology development, product development and after-sales service in the field of pump and valve fluids. Its 5MOUNTAINS? is the company's brand. Shanghai Wuyue Pump & Valve Group is more professional in technical support and product services for various valves, pumps, pipeline equipment, water treatment equipment required in the field of fluid control. All along, the products of Wuyue Pump & Valve Group have passed the long-term verification of the market, and the quality of its products has almost reached 99%. In the construction of many local and national key engineering projects, the pump valve products provided by Wuyue Pump & Valve Group have played an extremely important role.In the field of valves, Shanghai Wuyue Pump & Valve Group mainly develops and services products including safety valves, pressure reducing valves, regulating valves and other general valves. Among them, safety valves, pressure reducing valves, and regulating valves are key items. Products can be designed according to national standards, American standards, German standards, British standards, and Japanese standards. In addition, a number of valve technologies have cooperated with senior domestic manufacturers and have achieved good market benefits.In the field of water pumps, Shanghai Wuyue Pump & Valve Group mainly develops and serves products such as magnetic pumps, vacuum pumps, submersible pumps and other industrial pumps. For actual engineering projects, the fluid experts of Shanghai Wuyue Pump & Valve Group can select and customize models for users, and always insist on providing users with free technical support. Shanghai Wuyue Pump & Valve Group has several domestic experts and engineers in the field of fluids, which can fundamentally solve practical problems encountered in the construction of fluid projects for users.Shanghai Wuyue Pump & Valve Group advocates the design concept of "technological innovation and environmental protection first". The group company will continue to provide users with fluid industrial products that meet market needs. The Wuyue brand, Chinese, and world-wide, the peak of Wuyue is extremely high in the sky!Shanghai Wuyue Pump & Valve Group Co., Ltd. is willing to work with you to keep abreast of the times and create a brilliant tomorrow together!
Similar Product Recommend