Welcome Customer !

Membership

XwbooMining & Metallurgical EquipmentSteelmaking EquipmentContinuous Casting MachineConstant-temperature Casting Machine
  • $item.Title
  • $item.Title

Constant-temperature Casting Machine

Anhui Xinning Equipment Co.,Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Continuous Casting Machine
Place of Origin
AnHui, XuanCheng
Constant-temperature Casting Machine

I. Overview

By conversing electrics into thermal energy, the equipment is used to maintain the metal liquid in constant temperature (commonly known as holding machine or casting machine). It is widely applied to smelting, forging and casting. According to the properties of specific product, isothermal casting can be conducted in the specified smelting temperature, so as to guarantee the product quality; it can be used in fixed-point or unfixed-point casting; it can also be used in continuous or intermittent casting; it is especially suitable to the production operation of casting line, for its advantages in greatly fastening casting speed and improving the quality of forging product and etc.

II. Configuration

Furnace framework (flat car) 1 pc/ set
Furnace body 1 set
Furnace lid 1 pc
Operating device 1 set
Power supply control cabinet 1 set
Ground rack 1 set
1:72 reducer 3 pcs

III. Technical Parameters1. Specification of power (300kw)
A、1t: B、1.2t : C、1.5t:
2. Input voltage 400v Output voltage 800v working voltage frequency 500hz
3. Displacement distance of the whole machine X direction 3~4.m Z direction 1.4m
4. Casting height (distance from sprue to the mould-filling box): 60~200mm (in Y direction)

IV. Operating Instructions:

1. For furnace repair, it is feasible to refer to intermediate-frequency furnace; after repair, the furnace shall be baked to dry by ladle dryer;
2. Prepare relevant auxiliary facilities and tools for casting in advance, such as buffer pallet; conduct routine pre-booting check: whether the lubrication, operation and the power supply are normal; clamp the plug rod in place;
3. Start up the water-cooling circulation system, turn on the power supply, and the iron liquid flows into the constant-temperature furnace from tundish. Then cover the furnace lid and start up and heat the furnace to the setting temperature;
4. Adjust the flat car to align the sprue with the mould-filling box and then commission the pull rod to align the casting position until it is aligned to the correct place, and then carry out the normal casting;
5. After casting, lift away the furnace lid, and conduct water cooling over the furnace; when the temperature of furnace is cooled down to about 80℃, stop flushing and just let the furnace cool itself down.
6. Clean the furnace pit.
7. Keep water circulation running for 3 hours.
  Anhui Xinning Equipment Co., Ltd.(Former Anhui Province Ningguo Xinning Equipment Manufacturing Science & Technology Development Co., Ltd), which is located in State-level economic and technological development zone of Ningguo city, covers an area of 40 acres, Production workshop is 50000 square meters, is a technology enterprises that professional in research and development, manufacture complete sets of wear resistant castings and its associated equipment. Currently enterprise is the”Anhui province private technology enterprises, Anhui province high-tech enterprises”, Xinning company rely on the abundant technical force, excellent production equipment, scientific management system, independent developed series”sand lined iron mold casting line, flaskless molding casting line, oil quenching heat treatment line, casting sand recycling machine, steel ball mold and a full set of ball casting production equipment etc...” and sand lined iron mold casting line became scientific and technological project of Anhui Province in 2013. Through the cooperation between school and enterprise, Xinning company set up”Master’s training base for Anhui Polytechnic University, Wear-resisting equipment technology research and development center for Jinan University, Production, study and research base for Anhui research institute of mechanical science” etc... Our company has a number of independent intellectual property rights, of wich more than 30 patents for inventions. And casting ball heat treatment line listed in the “national torch plan” in 2013.Relying on the base of Ningguo wear-resistant industry, Combined with the practical experience of more than ten years of Wear-resisting material and equipment manufacturing, has a engineer team with group of design, manufacturing, ball automatic casting line, with advanced manufacturing equipment, has a strong ability in research and development, manufacturing, scientific quality control processes, perfect after-sale service system, let clients use without hesitation. Meanwhile, Xinning company can provide the overcall planning and design for the project of new wear-resistant materials enterprise, supporting the process technology of the whole product and the training for equipment operator & maintainer.
Similar Product Recommend