Welcome Customer !

Membership

Shenzhen Behost Electronics Co. Ltd
Free Member ·1YRS
ShenZhen,GuangDong
Manufacturer

Main Products: Fingerprint Lock|IC Card Lock|Magnetic Lock

Xwboo>Products

Normally closed magnetic electric lock

Model
Nature of the Manufacturer
Manufacturer
Product Category
Narrow body electric lock
Place of Origin
City, Province
Overview
Normally closed magnetic electric lock
Product Details

Product No :BHL-800CK


Product specifications are as follows:


Normally closed electric plug lock body specifications: 260mm long X30mm wide X48mm high


Panel size: 270mm long X35mm wide X0.6mm thick


Magnet holder: 100mm long X25mm wide X3mm thick


Mechanical lock cylinder: 60mm long, three-piece key


Input voltage: DC12V use


Cylinder diameter: 15.5mm


Lock tongue length: 15.5 mm


Starting current: 1.0A (starting moment)


Working current: 0.2A (unlocked maintenance)


Door opening method: 180°


Safety type: power on unlock


Adaptation range: wooden door, fire door, metal door, lower frameless glass door


Mechanical lock cylinder: 60mm long, three-piece key


Optional accessories: lower frameless glass door with small door clamp BHB-100D or BHB-700D


Professional device: built-in surge absorber and reverse current protection device


Signal output: with lock delay, with door status signal, with lock status signal output, with ground unlock function


Lock delay: 0~3~6~9 seconds


Cylinder strength: stainless steel Japanese grain treatment, withstand 850kg lateral pressure


Lock body surface temperature: ambient temperature +10°


Door gap magnetic sense distance: 10mm


Operating ambient temperature: -20 ~ +55 ° C


Ambient humidity: 0 to 80% relative humidity


Electric lock durable design: professional electromagnetic material design, 500,000 durability


Panel material design: high-strength aluminum alloy, brush anodizing


Product weight: 1.3kg / handle


Normally closed magnetic electric lock

Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the magnet seat to correct the hole position; 2, the gap between the lock body and the magnet seat should not be greater than 10mm; 3, the lock body, magnet seat must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;


Product advantages: This product is equipped with a rear door switch function, which can directly unlock the ground through the electric lock purple line; the moving parts are broken and polished, and the magnetic induction power is used to prevent mechanical failure; the ultra-low temperature design is more energy-saving and more environmentally friendly; Ten times of power-on locking durability; built-in surge absorber to prevent unstable power supply lock body; high-strength aluminum alloy lock body, stainless steel lock tongue; product specifications, complete, suitable for all types of door lock installation


Product Warranty: In the quality problems caused by non-human factors, our magnetic lock series products provide 19 months of quality assurance services, electric locks, cathode locks and other accessories are warranted for 12 months, under other conditions The product damage, maintenance materials and other expenses are at the user's own expense; the products pass the EU CE and China ROHS certification


Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!