Welcome Customer !

Membership

Shenzhen Behost Electronics Co. Ltd
Free Member ·1YRS
ShenZhen,GuangDong
Manufacturer

Main Products: Fingerprint Lock|IC Card Lock|Magnetic Lock

Xwboo>Products

Low temperature magnetic electric lock

Model
Nature of the Manufacturer
Manufacturer
Product Category
Standard electric lock
Place of Origin
City, Province
Overview
Low temperature magnetic electric lock
Product Details

Product No :FSP-100C


Product Name: Low temperature multi-function electric lock


Body size: 200mm long X34mm wide X42mm high


Panel size: 200mm long X34mm wide X3mm thick


Cover: 210mm long X42mm wide X0.8mm thick


Magnet holder: 90mm long X24mm wide X2mm thick


Cylinder diameter: 15.5mm


Lock tongue length: 15.5 mm (pop-up)


Input voltage: DC12V


Starting current: 0.9A (starting moment)


Working current: 0.1A (fully locked)


Delay function: 0 seconds, 2.5 seconds, 5 seconds


Door opening method: 180°


Safety type: power off unlock


Low temperature magnetic electric lock

Optional accessories: upper and lower frameless glass door with door clamp FSP-22D


                  Frameless glass door with small door clamp FSP-20D or FSP-21D


Adaptation range: glass door, wooden door, fire door, metal door


Professional device: built-in surge absorber device


Signal output: FSP-100-1 without delay circuit


           FSP-100 three-wire with delay (purple to earth unlock function)


           FSP-100C+ six-wire with delay, with magnetic door function


           FSP-100C nine line with delay, with door magnetic, lock status detection


Cylinder strength: stainless steel Japanese brushed wire drawing, withstand 850kg lateral pressure


Lock body surface temperature: ambient temperature +10°


Door gap magnetic sense distance: 10mm


Operating ambient temperature: -40 to +55 ° C


Ambient humidity: 0 to 80% relative humidity


Electric lock durable design: professional electromagnetic material design, 800,000 durability


Panel material design: high-strength aluminum alloy, brush anodizing


Product weight: 1 kg / handle



Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the magnet seat to correct the hole position; 2, the gap between the lock body and the magnet seat should not be greater than 10mm; 3, the lock body, magnet seat must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;