Welcome Customer !

Membership

Shanghai Bao Feng Machinery Manufacturing Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 冷凝器

Xwboo>Products

Shanghai Bao Feng Machinery Manufacturing Co., Ltd.Free·1YRS

  • E-mail

    bfmarketing@lianhetech.com

  • Phone

    4000873883,+86-021-36161585

  • Address

    58 gongye road, baoshan city industrial park

Contact Now

SPL- S Series CLOSED CIRCUIT CROSS FLOW EVAPORATIVE CONDENSER

Model
Nature of the Manufacturer
Other
Product Category
Evaporative Condenser
Place of Origin
City, Province
Overview
SPL- S Series CLOSED CIRCUIT CROSS FLOW EVAPORATIVE CONDENSER
Product Details


SPL- S series Closed Circuit Cross Flow Evaporative Condenser is equipped with: spray water distribution, coils, fills as heat exchange layer, drift eliminator, water collection basin at the bottom. Outside the base there is a circulating water pump, an electronic de-scaling, and a direct drive axial fan on the side top of the condensing coil. 


When working, the cooling water is pumped to the nozzle above the condensing coil and sprayed evenly on the outer surface of the condensing coil, forming a very thin water film. After the axial fan induced air, air from the top of the coil and the side of the fills go into the equipment inside. It enhanced air flow and the formation of negative pressure in the case, promote to lower water evaporation temperature and water film evaporation, strengthen the heat release of the condensation coil. The high-temperature refrigerant vapor enters from the upper of coils, and the condensing liquid of the cooling water outside coils flows out from the lower of coils.


A small portion of the water is evaporated which removes the heat. The warm moist air is drawn sidewise also by the fan and is discharged to the atmosphere. The remaining water is cooled again by passing the PVC fills, then falls to the sump at the bottom of the condenser where it is recirculated by the pump up through the water distribution system and back down over the coils.


SPL-S SERIES PRODUCTS Specialty:

1、Advanced heat exchange principles and proprietary intellectual property rights; 

2、 High efficiency, energy saving and environmental protection;

3、 Compact shape, easy installation;

4、 Reliable, Simple Operation and Maintenance;

5、 Strong anti-corrosion ability, long service life ;

6、 High cleanliness ;