High-speed and high-pressure multi-channel rotary joint series product details
Multi-channel series rotary joint is a kind of rotary joint used for low-speed, high-pressure, multiple media, and multi-channel equipment. It serves the processing center rotary table, hydraulic workstation, coiler, converter, large package rotary table, and hydraulic machinery. And multi-channel high-voltage controllers and other equipment
Features:
1. Supported by two large precision bearings, running smoothly, and the bearings are maintenance-free for life;
2. Imported special seals to ensure long-life operation;
3. The stainless steel shaft core is specially treated to ensure sufficient wear resistance;
4. The shell can be made of aluminum alloy, stainless steel or copper;
5.Unique drain hole backflow design to prevent leakage to the outside and affect the environment;
6. Various technical indicators have reached similar foreign products;
7. Able to tailor the products needed by customers;
Technical Parameters:
Maximum speed: 400 r/min
Temperature range: -30~+80℃
Maximum pressure: 21Mpa
Working medium: fluid medium such as hydraulic oil and air
Important note:
1. The technical parameter data is very large and cannot be used at the same time; the high working speed is inversely proportional to the working pressure and is related to the lubrication capacity of the sealing medium and the heat dissipation of the seal;
When the speed is below 10RPM, the working pressure can reach 30Mpa;
2. The internal channels may leak each other, and attention should be paid to the compatibility of different fluids to prevent cross-contamination;
3. The working fluid and pressure medium should be used after filtration, and the filtration accuracy should not be less than 10μm;
4. Drain holes are provided to collect leaking oil under normal conditions;
5. When using vacuum and pressure exceeding 21Mpa, you need to consult the new spin sealing technology department;
6. When using other media other than hydraulic oil, you need to consult the New Rotary Seal Technology Department;