Welcome Customer !

Membership

Shenzhen Jiwei Automations Ltd.
Free Member ·1YRS
,
Other

Main Products: 液位开关

Xwboo>Products

Fork-11 Tuning Fork Level Switch

Model
Nature of the Manufacturer
Other
Product Category
Tuning Fork Level Switch
Place of Origin
City, Province
Overview
● Reasonable design of tines and precisely adjusted of fork resonant frequency. The lowest measurable density can be as low as 0.008g/cm³.● Particularly suits for level measurement of powdery, fine-grained bulk solids, can effectively avoid material buildup. ● Industry-leading performance for high temperature working environment, can tolerate process temperature up to 400℃. ● With CE certificates, gas and dust Flameproof Enclosure and Intrinsic Safety certificates. ● Made of strong corro......
Product Details
  • Fork-11Tuning Fork Level Switch is specially designed for powdery and fine-grainedbulk solids, such as sands, fine raw materials in chemical industry, flours,salts etc. The lowest measurable medium density can be as low as 0.008g/cm³. Itmakes Fork-11 the best level switch for ultra-low density mediums. Fork-11 hasvery high reliability. It has been applied extensively.


  • Fork-11 Tuning Fork Level Switchprobe is based on a tuning fork harmonic resonance. It utilizes piezoelectricdevices to drive the fork to vibrate and detect the changes of vibration. Thefork vibrates in resonant frequency when it does not contact with medium. Oncethe fork comes in contact with medium, vibrating amplitude of the fork will decrease substantially. Output fromthe detecting piezoelectric device will decrease accordingly. An integratedcircuit is designed to analyze the amount of decrease and output a switchsignal. By reasonably increasing the area of tines and precisely adjustingharmonic resonance, Jiwei Fork-11 Tuning Fork Level Switch offers a very highsensitivity. Therefore, the lowest measurable density can be as low as0.008g/cm³.


  • ● Reasonable design oftines and precisely adjusted of fork resonant frequency. The lowest measurabledensity can be as low as 0.008g/cm³.

    ● Particularly suits forlevel measurement of powdery, fine-grained bulk solids, can effectively avoidmaterial buildup.

    ● Industry-leadingperformance for high temperature working environment, can tolerate processtemperature up to 400℃.

    ● Strong self-diagnosticfunction helps to accurately locate the fault.

    ● Easy installation andmaintenance free.

    ● With CE certificates, gasand dust Flameproof Enclosure and Intrinsic Safety certificates.

    ● Made of strong corrosionresistant material 316L.


  • Applicable medium

    Types of the Medium

    powders or granular solids

    Density

    >0.008g/cm³

    Medium size

    Max. 10mm

    Fork data

    Vibrating frequency

    ~140Hz

    Fork length

    150mm

    Switching Delay

    When immersed

    0.5s

    When laid bare

    1s

    Power supply

    Relay output

    20~253VAC/20~72VDC

    Two-wire

    10~36V DC

    Maximum power consumption

    8VA (AC);1.5W (DC)

    Output

    Relay output

    DPDT, 5A/253V AC/24V DC

    Two-wire

    8/16mA, Alarm<2.3mA

    Working environment

    Process pressure

    -1~25bar

    Process temperature

    Regular: -50~150℃

    High temperature: -50~250℃

    Ultra high temperature:-50~400℃

    Ambient temperature

    -40~80℃

    Storage and transport temperature

    -40~80℃

    Overvoltage protections

    Relay output

    Category III, class I

    Two-wire

    Category III, class II

    Approvals

    Protection rating

    IP66/IP67

    Explosion-proof types

    Flameproof Enclosure: Ex d IIC T6~T1 Gb, Intrinsic Safety: Ex ia IIC T6~T1 Ga

    CE

    LVD and EMC certificates

    Materials

    External Housing

    Aluminum Alloy

    Ground terminal

    316L

    Process fitting

    316L

    Fork body

    316L

    Process seal

    Klingersil C-4400

  • ● Low density foam beads in the silo of a foam molding machine and aplastic forming machine.

    ● Zircon sand and petroleumcoke.

    ● Other (ultra-low density)particles and powders.

    ● After spraying PTFE on fork body, it is especially suitable for fumed silica(SiO₂) level measurement. The density of fumed silica is as low as 0.01g/cm³,and the lowest detectable value of Fork-11 is 0.008g/cm³, which fully meets themeasurement requirements of fumed silica working condition.