Characteristic:
Integrated cutting and cleaning;
Standard non contact height measurement function (NCS);
The tool mark detection function is selected;
The blade breakage detection function (BBD) is selected;
The function of workpiece shape detection is selected;
Optional data scanning and entry function;
Equipment workflow:
1. The lower arm takes the material to be cut out of the wafer box, places the material to be cut on the pre calibration table for pre calibration, and then sends it to the working disc for dicing.
2. The upper arm moves the cut material from the working disk to the cleaning disk for two fluid cleaning and wafer drying.
3. The lower arm will put the cut material back to the pre calibration table for pre calibration, and then push it back to the wafer box.
Service conditions:
1. Please set the machine in the environment of 20 ~ 25 ℃ (the fluctuation range is controlled within ± 1 ℃); the indoor humidity is 40% ~ 60%, keep constant, no condensation.
2. Please use clean compressed air with atmospheric pressure, dew point below - 15 ℃, residual oil content of 0.1ppm and filtration degree above 0.01um/99.5.
3. Please control the water temperature of cutting water to room temperature + 2 ℃ (fluctuation range is within ± 1 ℃) and that of cooling water to be the same as room temperature (fluctuation range is within ± 1 ℃).
4. Please avoid the equipment from gravity impact and any external vibration threat. In addition, please do not install the equipment near the blower, vent, high temperature device and oil pollution device.
5. Please install the equipment in the place with waterproof floor and drainage treatment.
6. Please operate in strict accordance with our product instructions.
Application fields: IC, optical optoelectronics, communication, LED packaging, QFN packaging, DFN packaging, BGA packaging
Precision cutting materials: silicon, lithium niobate, ceramics, glass, quartz, alumina, PCB