Welcome Customer !

Membership

Shenyang Heyan Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 划片机

Xwboo>Products
Product Categories

Shenyang Heyan Technology Co., Ltd.Free·1YRS

  • E-mail

    hymarket@heyantech.com

  • Phone

    024-31238383

  • Address

    No.81-13, Puhe Road, Shenbei New District, Shenyang, LiaoNing Building 2, 37 Shenbei Road, Shenbei New District, Shenyang,Liaoning

Contact Now

DS616 Precision Dicing Saw

Model
Nature of the Manufacturer
Other
Product Category
JIG SAW
Place of Origin
City, Province
Overview
DS616 precision dicing machine is equipped with imported 1.5KW high-speed spindle; θ - axis DD motor drive, which can improve the angle accuracy, angle resolution, and flatness of the worktable; the power distribution system is upgraded, and multiple functions can be selected according to customer needs.
Product Details
Product parameters Product details

Configuration and performance

Workpiece size

φ160mm /φ150mm

Cutting groove depth

≤4mm or customized

Chuck flatness

±0.005mm/160mm

Alignment system

70x straight light + ring light (210x optional)

Spindle

Revolution speed range

10000~50000rpm

Output power

1.5kW

X axis

Drive mode

Servo motor

cutting range

250mm

index resolution

0.001mm

Speed setting range

0.1~500mm/s

Y axis

Drive mode

Step motor + grating closed-loop control system

cutting range

230mm

index resolution

0.0001mm

stroke positioning accuracy

≤0.003mm/5mm

Whole-stroke positioning accuracy

≤0.005mm/170mm

Z axis

Drive mode

Step motor

stroke

30mm

index resolution

0.0001mm

Repeating accuracy

0.001mm/50second

θ axis

Drive mode

DD motor

Rotating angle range

380°

Rotating angle resolution

0.0002°

Basic specification

Power supply

Single phase, AC 220V±10%, 3.0kVA

Power consumption

During processing, 0.6kw (reference value)

During warming up, 0.4kw (reference value)

Compressed air

Pressure: 0.5~0.6MPa; maximum consumption: 200L/min

Cutting water

Pressure: 0.2~0.3MPa; maximum consumption: 3.0L/min

Cooling water

Pressure: 0.2~0.3MPa; maximum consumption: 1.5L/min

Exhaust air rate

1.5m3/min (ANR)

Machine dimensions W×D×H

665mm×850mm×1650 mm

Weight

500kg


Characteristics:

Standardly equipped with the image identification and automatic alignment function

Selectively equipped with the non-contact sensor (NCS) function

Selectively equipped with the blade broken detect (BBD) function

Selectively equipped with the kerf check function

Customized module available base on the customer requirements

Improved automation degree

Application Fields

Diode, audion, MEMS, IC, LED, NTC, photovoltaic, medical equipment, scintillation crystal, optics

Materials Suitable for the Precision Cutting

Silicon wafer, gallium arsenide, lithium niobate, aluminum oxide, ceramic, glass, quartz, sapphire, crystal, PCB board

Automatic Image Alignment Function

The image mode identification technology is adopted, and the data will be calibrated through the pre-registered position; first find out the mark labeled on the material to be processed, then align the target and adjust the angle, and finally calculate the position of the cutting path.


Usage Conditions

1. Please set the machine in the environment of 20℃~25℃ (The fluctuation range should be kept within ±1℃); the indoor humidity should be 40%~60%, keeping constant, without condensation.

2. Please use the clean compressed air with the atmospheric pressure dew point below -15℃, 0.1ppm residual oil, and filtration rating above 0.01μm/99.5.

3. Please keep the temperature of the cutting water 2℃ above the room temperature (The fluctuation range should be within ±1℃), and the temperature of the cooling water should be the same with the room temperature (The fluctuation range should be kept within ±1℃).

4. Please protect the equipment from the heavy impact or any external vibration threat. Moreover, please do not install the equipment near the air blower, ventilation opening, or the equipment generating high temperature or greasy dirt.

5. Please install this equipment in the place with the waterproof floor and with the drainage treatment.

6. Please strictly follow our instruction to operate.