Welcome Customer !

Membership

Shenyang Heyan Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 划片机

Xwboo>Products
Product Categories

Shenyang Heyan Technology Co., Ltd.Free·1YRS

  • E-mail

    hymarket@heyantech.com

  • Phone

    024-31238383

  • Address

    No.81-13, Puhe Road, Shenbei New District, Shenyang, LiaoNing Building 2, 37 Shenbei Road, Shenbei New District, Shenyang,Liaoning

Contact Now

DS9200 PLUS Precision Dicing Saw

Model
Nature of the Manufacturer
Other
Product Category
JIG SAW
Place of Origin
City, Province
Overview
Ds9200 plus precision dicing machine is equipped with 2.4kw high-power DC spindle; High rigidity portal structure; θ Shaft DD motor drive; The maximum workpiece size can reach 360 * 360mm, which is suitable for cutting large packaging substrate materials. The cutting efficiency can be increased by 90% compared with the single axis model.
Product Details
Product parameters Product details
Configuration and performanceMachining dimensionφ16''/□360mm
Grooving depth≤ 4mm or customized
Flatness of worktable±0.005mm/200mm
alignment systemDual lens, straight light + ring light
principal axisAssembly modeOpposite double spindle
Speed range6000~60000rpm
output powerDC, 2.4kw
X axisDriving modeservo motor
Left and right travel of worktable450mm
Stroke resolution0.001mm
Speed setting range0~800mm/s
Y axisDriving modeServo motor + grating closed-loop control system
Front and rear spindle stroke450mm
Stroke resolution0.001mm
Single step positioning accuracy≦0.002mm/5mm
Whole range positioning accuracy≦0.003mm/310mm
Z axisDriving modeservo motor
Spindle up and down stroke40mm
Stroke resolution0.0001mm
Repeat positioning accuracy0.001mm
θ axisDriving modeDD motor
Angle range380º
Corner resolution0.0002º
Foundation specificationPower SupplyThree phase, AC380 ± 5%, 5.0kva
compressed airThe pressure is 0.5 ~ 0.6MPa, and the maximum consumption is 400L / min
Cutting waterThe pressure is 0.2 ~ 0.3MPa, and the maximum consumption is 7.0l/min
cooling waterThe pressure is 0.2 ~ 0.3MPa, and the maximum consumption is 3.0l/min
Exhaust air volume8.0m3/min(ANR)
Overall dimension w × D × H1380mm×1300mm×1850mm
weight1550kg


Characteristics:

Standardly equipped with the non-contact sensor (NCS) function

Standardly equipped with the kerf check function

Selectively equipped with the blade broken detector (BBD) function

Selectively equipped with the workpiece shape detect function

Selectively equipped with the data scan and input function

Application Fields:

LED package, QFN, BGA, optical optoelectronics, communication

Materials Suitable for the Precision Cutting:

Wafer, PCB, ceramic, glass, lithium niobate, aluminum oxide, quartz

Ladder angle division function

When cutting PCB and other materials, irregular deformation will occur, and the All-Point angle can be calibrated to make the cutting positioning more precise and improve the machining accuracy.


Usage Conditions

1. Please set the machine in the environment of 20℃~25℃ (The fluctuation range should be kept within ±1℃).The indoor humidity should be 40%~60%, keeping constant, without condensation.

2. Please use the clean compressed air with the atmospheric pressure dew point below -15℃, 0.1ppm residual oil, and filtration rating above 0.01μm/99.5.

3. Please keep the temperature of the cutting water 2℃ above the room temperature (The fluctuation range should be within ±1℃), and the temperature of the cooling water should be the same with the room temperature (The fluctuation range should be kept within ±1℃).

4. Please protect the equipment from the heavy impact or any external vibration threat. Moreover, please do not install the equipment near the air blower, ventilation opening, or the equipment generating high temperature or greasy dirt.

5. Please install this equipment in the place with the waterproof floor and with the drainage treatment.

6. Please strictly follow our instruction to operate.