Characteristics:
Standardly equipped with the non-contact sensor (NCS) function
Standardly equipped with the kerf check function
Selectively equipped with the blade broken detector (BBD) function
Selectively equipped with the workpiece shape detect function
Selectively equipped with the data scan and input function
Application Fields:
IC, optics and optoelectronics, communication, LED, MEMS, medical equipment
Materials Suitable for the Precision Cutting:
Silicon wafer, gallium arsenide, lithium niobate, aluminum oxide, ceramic, glass, quartz, sapphire, circuit board
Workpiece Shape Identification Function
Precisely identifying the contour of the irregular shape material to be processed; can cut along the contour shape, reduce the idle stroke of the cutting, and increase the productivity.
Usage Conditions:
1. Please set the machine in the environment of 20~25℃ (The fluctuation range should be kept within ±1℃); the indoor humidity should be 40%~60%, keeping constant, without condensation.
2. Please use the clean compressed air with the atmospheric pressure dew point below -15℃, 0.1ppm residual oil, and filtration rating above 0.01um/99.5.
3. Please keep the temperature of the cutting water 2℃ above the room temperature (The fluctuation range should be within ±1℃), and the temperature of the cooling water should be the same with the room temperature (The fluctuation range should be kept within ±1℃).
4. Please protect the equipment from the heavy impact or any external vibration threat. Moreover, please do not install the equipment near the air blower, ventilation opening, or the equipment generating high temperature or greasy dirt.
5. Please install this equipment in the place with the waterproof floor and with the drainage treatment.
6. Please strictly follow our instruction to operate.