Characteristics:
Standardly equipped with the image identification and automatic alignment function
Standardly equipped with the non-contact sensor (NCS) function
Selectively equipped with the blade broken detector (BBD) function
Selectively equipped with the kerf check function
Customized module available based on the customer requirements
Improved automation degree
Application Fields:
Optical optoelectronics, communication, triode, IC, LED, NTC, photovoltaic, medical equipment, scintillation crystal
Precision cutting materials:
Blue glass, silicon wafer, gallium arsenide, lithium niobate, aluminum oxide, ceramic, quartz, sapphire, crystal, PCB board
Knife mark detection function
The image system can automatically detect the position, width, chipping, and eccentricity of the cutting tool marks, and performs baseline correction and cutting position correction to improve the cutting quality.
Usage Conditions:
1. Please set the machine in the environment of 20~25℃ (The fluctuation range should be kept within ±1℃). The indoor humidity should be kept 40%~60%, keeping constant, without condensation.
2. Please use the clean compressed air with the atmospheric pressure dew point below -15℃, 0.1ppm residual oil, and filtration rating above 0.01um/99.5.
3. Please keep the temperature of the cutting water 2℃ above the room temperature (The fluctuation range should be within ±1℃), and the temperature of the cooling water should be the same with the room temperature (The fluctuation range should be kept within ±1℃).
4. Please protect the equipment from the heavy impact or any external vibration threat. Moreover, please do not install the equipment near the air blower, ventilation opening, or the equipment generating high temperature or greasy dirt.
5. Please install this equipment in the place with the waterproof floor and with the drainage treatment.
6. Please strictly follow our instruction to operate.