Welcome Customer !

Membership

JAINNHER MACHINE CO., LTD.
Free Member ·1YRS
,
Other

Main Products: 磨床机械

Xwboo>Products

JAINNHER MACHINE CO., LTD.Free·1YRS

  • E-mail

    saledep@jainnher.com

  • Phone

    +886-4-23585299

  • Address

    No.333, 28th Road, Taichung Industrial Park, Taichung City, 407 Taiwan

Contact Now

CNC Plunge/Angular Cylindrical Grinder

Model
Nature of the Manufacturer
Other
Product Category
Cylindrical Grinding Machine
Place of Origin
City, Province
Overview
HYDROSTATIC BEARINGSThe wheel spindle is supported by 20kg/cm2 high pressure oil at axial and radial direction.
Product Details

HYDRODYNAMIC BEARING

  • The spindle is supported by oil membrane, as almost without metal contact between bearing and spindle, the spindle is less wearing and has a long and lasting life.
  • The oil membrane between bearing and spindle increases contact area, and therefore, workpieces can reach the highest precision and roundness.
  • Oil menbrane absorbs vibration during grinding process,the workpieces will be kept the best surface roughness.
  • The wheel spindle is supported is supported by 3kg/cm² low pressure oil at radial direction.

SPINDLE TRANSMISSION SYSTEM

  • Belt tension force is resisted by fix bushing.
  • The spindle pulley is equipped with buffering pad.

HYDROSTATIC BEARING/ HYDRODYNAMIC BEARING

  • The instant impact force caused by motor starting is absorbed by buffering pad.
  • The impact force does not directly affect the wheel spindle.

ONE-PIECE FABRICATED BASE DEFORMATION-FREE

  • The machine base is one-piece manufactured from Meehanite cast iron, tempered for maximum stability of material.
  • Box type base construction feaures superior stability and rigidity.
  • The base permits fast coolant exhaust,preventing thermal deformation from influencing machine accuracy.

WHEELHEAD FEEDING SADDLE

  • The wheelhead moves on double "V"slideways.
  • Top slideway surfaces are coated with Turcite-B and precision scraped.
  • Equipped with high resolution 0.0005mm linear scale for close-loop feedback.

TOUCH PROBE GAUGE

  • Measure the position and calculate the distance
  • Measure the position

AUTO IN-PROCESS GAUGE

  • Measuring workpiece OD, grinding and measuring simultaneously, improve production yield.
  • Inspecting workpiece roundness after grinding, and feed back to controller.
  • Inspecting workpiece accuracy after grinding.

AUTOMATIC GRINDING WHEEL BALANCING SYSTEM

  • Grinding wheel automatic balancing while rotating.
  • During machine operation if grinding wheel unbalancing, the device automatic adjust wheel balance, it has no need to dismount grinding wheel.

CRASH CONTROL

  • When over grinding workpiece, grinding wheel immediately retract, to avoid machine damage.
  • While grinding, the audio frequency function can shorten rapid traverse time, improve grinding efficiency.

WORK HEAD MAXIMUM RIGIDITY! HIGH PRECISION!

  • The catridge is supported by 8 P4-class angular contact ball bearings and roller bearings at front and rear end. This assures outstanding machining stability and makes the machine ideal for heavy duty machining.
  • FANUC servo motor dive.
  • The spindle provides centering and synchronized motion functions. Fast interchange between center and chuck.
  • The work head pemits 90°counter-clockwise swiveling and 30 ° clockwise,making the machine suitable for various grinding modes.

HYDRAULIC TAILSTOCK

  • The sleeve movement is hydraulically operated for convenient workpiece loading and unloading.
  • With foot pedal to control workpiece clamping and unclamping.
  • Workpiece clamping and unclamping force can be adjusted by turning a knob.
  • The sleeve is precision machined from hardened alloy, featuring maximum wear resistance and rigidity.

VARIETY GRINDING CYCLES

TOTAL DESIGN FOR USER NEEDS ! MOST PRACTICAL ! EAY OPERATION !

  • Plunge without oscillation
  • Plunge with oscillation
  • Angle plunge grinding
  • Multi-plunge grinding
  • Traverse grinding
  • Multi-plunge taper grinding
  • Traverse taper grinding
  • Shoulder plunge without oscillation
  • Shoulder traverse grinding
  • Shoulder plunge with oscillation

FORM TYPE INPUT! EASY TO EDIT PROCESSING MODE

  • Using special form type design, easy and fast to edit program for different grinding cycles
  • Using regular program but NC editing, user can edit any processing mode
  • Easy to expand special grinding cycle, for any processing needs
  • Offering foreign warranty service assure the accuracy and stability
  • Basic, grinding, dressing auxiliary four types of grinding cycle

HYDRAULIC PRESSURE SENSOR

HYDRODYNAMIC

  • The pressure switch provides pressure sensing function, the spindle can't start until lubrication oil pressure reaches the setting value. In case hydraulic system is abnormal, spindle running stops.

HYDRAULIC PRESSURE SENSOR

HYDROSTATIC

  • The pressure switch provides pressure sensing function, the spindle can't start until lubrication oil pressure reaches the setting value. In case hydraulic system is abnormal, spindle running stops.

HYDROSTATIC BEARINGSL SYSTEM

  • Hydrodynamic: The hydrostatic bearings system includes high pressure filter can, accumulator, pressure switch, check valve and throttle valve. Pressure can be adjusted in axial and radial direction.
  • Hydrostatic: In case power failure occurs, the accumulator may keep pressure for 5 minutes.

AUTOMATIC LUBRICATION SYSTEM

  • All moving and running parts are lubricated by automatic lubrication system.
  • The lubrication system is separately mounted from the machine to avoid vibration and facilitate heat dissipation.
  • With oil constant temperature cooler.
FunctionITEMCNC PLUNGECNC ANGULAR
JHP-2003CNCJHP-3506CNCJHP-4006CNCJHP-3510CNCJHP-4010CNCJHA-2003CNCJHA-3505CNCJHA-4005CNCJHA-3508CNCJHA-4008CNC
CapacityMax. work swingØ200mmØ350mmØ400mmØ350mmØ400mmØ200mmØ350mmØ400mmØ350mmØ400mm
Max. grinding length300mm600 mm1000 mm300 mm520 mm820 mm
Max. grinding dia.Ø200mmØ330Ø380Ø330Ø380Ø200mmØ330Ø380Ø330Ø380
Max. job weight80kg150kg80kg150kg
Distance between centers300mm600 mm1000 mm300 mm600 mm1000 mm
Center height100175200175200100175200175200
Grinding wheelGrinding wheel sizesØ355orØ405Ø510x50 ~ 100xØ203.2Ø405x38 ~ 50xØ127Ø610x50 ~ 100xØ203.2
Grinding wheel speed1780rpm1250 rpm1560 rpm1250 rpm
Max. peripheral speed33 m/sec33 m/sec33 m/sec40 m/sec
Wheel headFeed angle90°60°
Swivel angle±0°±0°
Rapid traverse speed6 m/min6 m/min
Max. travel220mm280 mm220 mm280 mm
Min. setting unit0.0001 mm0.0001 mm
Grinding feed rate0.001 ~ 6000 mm/min0.001 ~ 6000 mm/min
Hydrostatic pressure_Hydrodynamic 3kg / Hydrostatic 20kg_Hydrodynamic 3kg / Hydrostatic 20kg
TailstockRetraction of sleeve30 mm30 mm
Sleeve diameterD: 48mmD: 70 mmD: 48 mmD: 70 mm
Center taperNO#3NO#4 (Opt. NO.#5)NO#3NO#4 (Opt. NO.#5)
Hydraulic cylinder pressure20 kg20 kg
Wrok headSpindle speed (variable)10 ~ 500 rpm/min10 ~ 500 rpm/min
Center taperNO#3NO#4 (Opt. NO.#5)NO#3NO#4 (Opt. NO.#5)
Spindle typeCartridge type (Opt.)Cartridge type (Opt.)
Swivel angle120 (90CCW ; 30CW)120 (90CCW ; 30CW)
Work tableSwivel angle (C.W.)+10+9+7+10+9+7
Swivel angle (C.C.W.)-3-5-4-3-5-4
Rapid traverse speed8 m/min10 mm/min8 mm/min10 mm/min
Min. setting unit0.0001 mm0.0001 mm
Max. travel640 mm700 mm1100 mm640 mm600 mm900 mm
Grinding feed rate0.001 ~ 6000 mm/min0.001 ~ 6000 mm/min
MotorGrinding wheel spindle5HP 4P(Opt.7.5HP 4P)7.5HP 4P (Opt.10HP 4P)5HP 4P (Opt. 7.5HP 4P)10HP 4P (Opt.15HP 4P)
Work head1.0KW1.5KW1.0KW1.5KW
Work table feeding (Z-axis)1.2KW1.8 KW1.2KW1.8 KW
Wheel table feeding (X-axis)1.2KW1.8 KW1.2KW1.8 KW
Hydraulic pump1/4HP 4P1HP 4P1/4HP 4P1HP 4P
Wheel head pump_Hydrodynamic 1HP 4P / Hydrostatic 2HP 4P_Hydrodynamic 1HP 4P / Hydrostatic 2HP 4P
Coolant pump1/8HP 2P1/2HP 2P1/8HP 2P1/2HP 2P
Magnetic coolant separator1/25HP 2P1/25HP 2P1/25HP 2P1/25HP 2P
Oil cooler_Hydrostatic wheel head 600W / Hydrodynamic wheel head 400W / Slide way 250W_Hydrostatic wheel head 600W / Hydrodynamic wheel head 400W / Slide way 250W
Oil tankHyd. Oil tank (slideways, screw ends & measurement)30L60L30L60L
Wheel head lubrication_50L_50L
Coolant tank80L160L80L160L
MachineN.W.Fully enclosed3800kg7460kg8080kg3800kg7460kg8080kg
Semi enclosed3600kg6840kg7800kg3600kg6840kg7800kg
G.W.Fully enclosed4100kg7860kg8480kg4100kg7860kg8480kg
Semi enclosed3900kg7240kg8200kg3900kg7240kg8200kg
Machine dimensions (LxWxH)Fully enclosed3.3x2.1x2.25.0x2.1x2.25.8x2.1x2.23.3x2.1x2.25.0x2.1x2.25.8x2.1x2.2
Semi enclosed3.2x2.1x2.24.2x2.1x2.25.1x2.1x2.23.2x2.1x2.24.2x2.1x225.1x2.1x2.2
Packing dimensions (LxWxH)Fully enclosed3.5x2.2x2.25.2x2.2x2.26.0x2.2x2.23.5x2.2x2.25.2x2.2x2.26.0x2.2x2.2
Semi enclosed3.4x2.2x2.24.4x2.2x2.25.3x2.2x2.23.4x2.2x2.24.4x2.2x2.25.3x2.2x2.2
* All specifications are subject to change without notice.

 3505A/3506P Fully enclosed3508A/3510P Fully enclosed4005A/4006P Semi-enclosed4008A/4010P Semi-enclosed
A2880368028803680
B874987634747
C12211173709661
D4975579042235088

 2003A Semi-enclosed2003P Semi-enclosed2003A Fully enclosed2003P Fully enclosed
A1650165016501650
B713731760760
C830731840840
D3193311232503250
CNC Control

A. Oil cooler (except 2003 series)

X-axis linear scale

B. X-axis linear scale

Hydraulic tailstock with manual movement

C. Work lamp

Grinding wheel and flange

D. Food pedal

Tungsten carbide tipped centers

E. Angle adjustment gauge 

Automatic lubrication system

F. Hydraulic tailstock with manual movement

Grinding wheel and flange

G. Grinding wheel and flange

Tungsten carbide tipped centers

H. Tungsten carbide tipped centers

Automatic lubrication system

I. Automatic lubrication system

High pressure oil system

J. High pressure oil system

Leveling bolts and blocks

K. Leveling bolts and blocks

L. Tailstock dressing device (except 2003 series)

M.  Diamond dresser (worktable)

Magnetic coolant separator

N. Magnetic separator + coolant tank + pump

Leveling bolts and blocks

O. Leveling bolts and blocks

Wheel lifting tool

P. Wheel lifting tool (for electric hoist)

Tool kits and toolbox

Q. Tool kits and toolbox.

2-point steady rest

A. 2-point steady rest

3-point steady rest

B. 3-point steady rest

Paper filter

C. Paper filter

D. 6"/8" 3-jaw scroll chuck

E. Cartridge type work head spindle

F. Center ring and drive plate

Work holder

G. Work holder

Wheel lifting tool

H. Wheel lifting tool(except 2003 series)

Wheel balancing stand

I.Wheel balancing stand

Wheel balancing arbor

J. Wheel balancing arbor

Fully endosed splash guard & Oil mist device

K. Fully enclosed splash guard & Oil mist device

L. Touch probe gauge

Dressing device

M. Hydraulic 3-jaw chuck

Magnetic Separator

A. Marposs/BS : Thickness measuring gauge

Balancing Arbor

B. T18/PR3: Touch probe gauge 

Balancing Base

C.  A. Z-axis linear scale

3-jaw Chuck

D. Auto in-process gauge (Marposs)



E. Auto in-process gauge(BS)



E. Auto in-process gauge(BS)



F. Wheel balancing system(BS)



 

High Speed Spindle

 

High Speed Spindle

G. Wheel crash control device(Marposs)

High Speed Spindle

 

High Speed Spindle