H20PN-166 Series PTN Aggregation
Overview
H20PN-166 series compact PTN (Packet Transport Network) device from Beijing Huahuan Electronics Co., Ltd is applied to packet transmission network, using the MPLS-TP technology to meet the operator’s requirements for continuous growth and flexible scheduling of transmission network bandwidth.
H20PN-166 series,including H20PN-166-16GX-SP, and H20PN-166-4X.16GX-SP, can provide 4 10GE optical interfaces, 16 GE SFP Ethernetoptical ports, one 10/100/1000BASE-T RJ-45 electrical port as NM port, one RS232 as CONSOLE port, one 1PPS/TOD and one BITS interface as clock interface.
H20PN-166 series provides OAM and protection switching mechanism to realize fast fault detection, trigger protection switching and ensure the carrier-class QoS in packet transport network. With the QoS policy, the operators can provide different qualities of service to users to realize the integrated network of data, voice and videoservices.
H20PN-166 series supports IEEE 1588v2 protocol and the synchronous Ethernet technology, providing high precision time and clock information for the backhauling.
Table 1.H20PN-166 series detailed difference
Device Type | 10GE Optical Port | GE Optical Port |
H20PN-166-16GX-SP | -- | 16 |
H20PN-166-4X.16GX-SP | 4 | 16 |
Hardware Architecture
H20PN-166-4X.16GX-SP can provide 4 10GE interface(SFP+), 16 GE SFP Ethernet optical ports, one 10/100/1000BASE-T RJ-45 electrical port as NM port, one RS232 as CONSOLE port, one 1PPS/TOD and one BITS interface as clock interface.
H20PN-166-16GX-SP can provide 16 GE SFP Ethernet optical ports, one 10/100/1000BASE-T RJ-45 electrical port as NM port,one RS232 as CONSOLE port, one 1PPS/TOD and one BITS interface as clockinterface.
Features
l Uses MPLS-TP technology and supports static LSP, MPLS-TP L2VPN, MPLS-TP OAM, MPLS-TPAPS;
l Supports multiple services, including E-Line, E-LAN, E-Tree;
l Supports QoS management, including port speed limit, port mirroring, priority trust, flow classification, flow behavior, flow policy, priority mapping, queue scheduling,congestion avoidance, traffic shaping, and traffic statistics;
l Provides reliable protection mechanism, including ELPS, ERPS, Link Aggregation (manualLAG and static LACP), and STP/RSTP;
l Support sprecise clock and time synchronous technology , including synchronous Ethernet and IEEE 1588 v2 protocol (PTP);
l Provides Ethernet OAM protocols, including IEEE 802.3ah, IEEE 802.1ag and ITU-T Y.1731;provides standard OAM active mode and passive mode, OAM link discovery, OAM remote loopback and OAM link event;
l Supports real-time SLA network detection which can collect statistics of response time,network jitter, delay, packet loss rate, through put and other network information;
l IEEE802.1Q VLAN and IEEE802.1ad VLAN;
l Interface loopback, Loop detection;
l Jumbo frame setting (maximum 9720 bytes);
l Flow control;
l DDM;
l MAC Address control;
l ACL;
l Broadcast storm repression;
l Remotein-band monitoring management;
l DHCP client and zero configuration;
l Remote power failure alarm;
l EzView NMS, SNMP and CLI;
l NTP and RMON;
l Upgrade of software through TFTP.
Specifications
10GE Base-R Interface |
Interface specifications | Complying with IEEE802.3, IEEE 802.3ae, IEEE802.1Q, IEEE 802.1p, IEEE802.1ad, IEEE802.1d,IEEE802.1w, IEEE802.3ad, IEEE802.3ah, IEEE802.1ag, Y1731 |
Interface rate | 10GE |
Operation mode | Auto-negotiation |
Interface connector | SFP+ socket |
Interface number | 4 |
Average output optical power | -11.5dBm~ -3dBm |
Reception sensitivity | ≤-19dBm (BER=1×10-10) |
Minimum overload point | > -3dBm |
Transmission wavelength and distance | Determined by optical module |
100/1000Base-FxInterface |
Interface specifications | Complying with IEEE 802.3, IEEE-802.3z, IEEE802.1Q, IEEE 802.1p, IEEE802.1ad, IEEE802.1d,IEEE802.1w, IEEE802.3ad, IEEE802.3ah,IEEE802.1ag, Y1731 |
Interface rate | 100M/1000M |
Operation mode | Auto-negotiation,1000M full-duplex, 100M full-duplex |
Interface connector | SFP socket |
Interface number | 16 |
Average output optical power | -10dBm~ -3dBm |
Reception sensitivity | ≤-23dBm (BER=1×10-10) |
Minimum overload point | > -3dBm |
Transmission wavelength and distance | Determined by optical module |
External Clock Input/output Port (BITS) |
Clock source | Internal clock, NNI-port line clock, UNI-port line clock, external input clock. |
External clock input | 2MHz, 2Mbit/s |
External clock output | 2MHz, 2Mbit/s |
Connector | RJ45 socket |
External Time Synchronization Interface (1PPS+TOD) |
Electrical specification | RS422 |
Interface connector | RJ45 socket |
Power Supply |
Voltage | DC -48V(-36V~-72V) AC 220V (100V~240V) |
Consumption | ≤40W |
Operation Environment |
Working temperature | -10ºC ~50ºC |
Storage temperature | -40 ~70ºC |
Relative humidity | 5%~85%(non-condensing) |
Device |
Size | W×D×H(mm): 440×258×44 |
Weight | ≤4kg |
Typical Application