H18EDD-0204P-8E1 Ethernet Demarcation Device
Overview
H18EDD-0204P-8E1 Ethernet demarcation device,on the basis of high-performance L2 switch service, provides convenience of maintenance and deployment, multi-service support, carrier-class OAM management,reliable protection mechanism, QoS policy, security mechanism, and other service optimization measures. Meanwhile, it features excellent extensibility and reliability.
This type of device provides four GE optical ports as NNIs, two GE electrical ports as UNI ports, eight E1 service interfaces and one FE electrical port as management ports, and its CONSOLE portis RS232. H18EDD-0204P-8E1 supports the latest carrier Ethernet attributes andis compatible with IEEE, ITU, and MEF standards. The carrier-class OAM has enhanced network management capacity and meet the operator’s requirements for comprehensive and powerful capacity of monitoring and management. QoS function has extended the scope of carrier Ethernet, applying it to real-time service,i.e. voice and video. S-VLAN ID is used to implement VLAN extensibility and provide service for hundreds of enterprise users and hundreds of thousands of individual users.
Features
² UNI supports 10/100M/1000M auto-negotiation and 10/100M/1000M full-duplex/half-duplex manual modes, AUTO-MDIX (Media Dependent InterfaceCrossover). NNI supports auto-negotiation mode and 1000M full-duplex mode.
² Circuit emulation of E1 and V.35 services on Ethernet link; SAToP protocol; MPLS,IP/UDP, and MEF encapsulation.
² E1 and V.35 interface clock modes support local oscillator clock, adaptive clocking,and port loopback clock.
² IEEE802.1QVLAN, IEEE802.1ad VLAN (at most 4094 VLAN entries).
² E1 interface complies with ITU-T G.703 recommendation. It has built-in BER tester and loopback test functions.
² V.35 interface complies with ITU-T V.35/V.36 recommendation, supports framed and unframed modes, and provides various interface rates (N×64K, 1≤N≤31), interface modes (DTE and DCE), and clock selections (DCE internal oscillator clock,DCE line clock and DTE V.35 interface clock).
² 120Ω_E1 interface in RJ-48C. It can be converted to 75Ω unbalanced interface through DIP switch on the bottom plate and proprietary cables, to implement impedance matching.
² Cache absorption function (resisting packet delay variation).
² EFM (Ethernetin the First Mile), CFM (Connectivity Fault Management), SLA (Service Level Agreement), and other carrier-class OAM management.
² STP/RSTP/MSTP(Spanning Tree Protocol/ Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol).
² Link aggregation (manual LAG and static LACP).
² ELPS (Ethernet Linear Protection Switching).
² ERPS (Ethernet Ring Protection Switching).
² QoS function based on port speed limit, port mirror, priority trust, flow classification, flow policy, priority mapping, and queue scheduling.
² Interface Protection.
² Jumbo frame setting (maximum 9720 bytes).
² Flow control.
² DDM (Digital Diagnosis Monitoring).
² MAC address forwarding control.
² IEEE802.1X authentication.
² ACL (Access Control List).
² Broadcast storm repression.
² Remotein-band monitoring management.
² Power failure alarm.
² EzView network management, SNMP (Simple Network Management Protocol), and CLI.
² NTP(Normal Temperature and Pressure) and RMON (Remote Network Monitoring).
² Upgrade of software through TFTP (Trivial File Transfer Protocol).
Specification
10/100/1000Base-Tx interface |
Interface specifications | complying with IEEE 802.1, IEEE-802.1u, IEEE 802.1Q, and IEEE 802.1p |
Interface rate | 10/100M/1000M |
Operation mode | auto-negotiation, 1000M full-duplex, 1000M half-duplex, 100M full-duplex, 100M half-duplex, 10M full-duplex, 10M half-duplex |
Interface connector | RJ-45 socket |
Interface number | 3: 2 UNIs and 1 SNMP management port |
1000Base-Fx interface |
Interface specifications | complying with IEEE 802.3, IEEE-802.3z, IEEE 802.1Q, IEEE 802.1p, IEEE802.1ad, IEEE802.1d, IEEE802.1w, IEEE802.3ad, IEEE802.3ah, IEEE802.1ag, Y1731 |
Interface rate | 1000M |
Operation mode | auto-negotiation and 1000M full-duplex |
Interface connector | SFP socket |
Interface number | 4 |
Transmission wavelength and distance | Determined by optical module |
E1 interface |
Bit rate | 2.048 Mbps ± 50ppm |
Line code | HDB3 |
Point –to-point single added process delay( when set to minimum delay) | ≤ 10ms |
Output frequency stability (adaptive timing, stable) | ≤5ppm |
Output jitter (adaptive timing) | ≤0.1UI |
Connector | RJ-48C |
Impedance | by default: 120Ω, 75Ω conversion can be achieved |
Interface number | 0, 4, 8 |
Power voltage |
Voltage | DC -48V(-36V~-72V) AC ~220V(AC100V~240V) |
Power consumption |
Power consumption | ≤ 65W |
Operation environment |
Operation temperature | -5°C ~55°C |
Storage temperature | -40°C ~70°C |
Relative humidity | 5%~85%RH (non-condensing) |
Chassis size |
Size | W×D×H (mm): 440×285×44 |
Device weight |
Weight | ≤3kg |
Typical Application
Standard Compliance
Items | Standards and Protocols |
VLAN | IEEE 802.1Q ,IEEE802.1ad |
Link aggregation | S-MAC,D-MAC,S-MAC and D-MAC,manual LAG and static LCAP modes. |
EPRS | Single ring, intersecting rings and tangent ring |
ELPS | 1:1 bidirectional switching, retentive and non-retentive modes |
QoS | Port speed limit,port mirroring,priority trust,flow classification,flow policy,priority mapping,queue scheduling |
Flow control | Half-duplex/full-duplex, back pressure and IEEE802.1x |
DDM | Analyzing monitoring data of optical module |
EFM | IEEE 802.3ah |
CFM | Continuity check function,LB,LT |
LLDP | IEEE 802.1ab |
ACL | Based on port, IP ACL and MAC ACL |
Storm suppression | Unkown unicast flow, unkown multicast flow and broadcast flow |
RMON | Established by IETF(internet engineering task force) |
DHCP | Client/server model |
NTP | Support NTP client mode,can synchronize time with NTP server. |