Working principles
The materials enter into the dryer from feeding inlet. With the action of vibratory force, the materials move forward in horizontal direction while the hot air enters from below the dryer, and passes through fluidized bed in a bottom-top manner, and exchanges heat with wet materials. The wet air is drained through the air outlet at the top of the dryer. Dried materials are discharged from the discharge outlet.
Scope of application
The granulator is mainly applied to drying of particles produced by wet process granulation.
Characteristics:
1. Materials receive heat uniformly and the heat exchange is sufficient. The drying strength is high, and energy consumption of the dryer is 30% lower than that of ordinary dryer.
2. Vibration source: vibration motor driving; steady operation; easy maintenance; low noise; long service life.
3. Stable fluidization without dead angle and blow-through.
4. Good adjustability and wide application.
5. With low surface damage to the materials; the basic materials strips will automatically break in the process of drying.
6. The closed structure effectively prevent cross contamination between the materials and air, bringing clean operating environment.
Model list
Serial number | Model | Area of drying bed |
1 | VFD(B)-2.4 | 6×0.4 |
2 | VFD(B)-3.0 | 7.5×0.4 |
3 | VFD(B)-3.6 | 6×0.6 |
4 | VFD(B)-4.2 | 7.0×0.6 |
5 | VFD(B)-6.75 | 7.5×0.9 |