Welcome Customer !

Membership

Botou Yijia Industry Co. Ltd.
Free Member ·1YRS
,
Other

Main Products: 水泵

Xwboo>Products

Magnetic high viscosity rotor pump

Model
Nature of the Manufacturer
Other
Product Category
Magnetic pump
Place of Origin
City, Province
Overview
Magnetic high viscosity rotor pump
Product Details

Botou Yijia Industry Co., Ltd. specializing in the production of R & D magnetic high viscosity pump rotor, magnetic rotor pump with high viscosity transport of high viscosity, high flow rate, small volume, high efficiency and wide application, the best-selling Chinese and the international market, is Chinese more efforts of a number of products.
Magnetic high viscosity rotor pump installation and precautions:
1 according to the basic dimensions of the concrete foundation, at the same time to the ground bolt.
2 in the installation of the pump and motor before the inspection, each part should be intact, the pump should be no debris
3 on the basis of the unit, in the floor and the foundation between the pair of wedge pad, through the high-speed pad, to find the level of positive pump.
4 suction pump, the pipeline should be out of support, can not be used to support the pipeline pump, inlet and outlet pipe path should be consistent with the pump inlet and outlet diameter
5 high viscosity rotor pump magnetic pump installation should be connected to the inlet pipe, filled with liquid and then connected to the outlet pipe, correction of steering. Pump inlet pipe must be matched with the pump, and the total length of not more than 5 meters.
6 installation is completed, after the use of hand rotation coupling, check whether rub phenomenon
7 high viscosity rotor pump magnetic pump is strictly prohibited from the media containing the material
8 in order to prevent debris into the pump, the inlet should be equipped with filters, filter area should be greater than 3-4 times the cross-sectional area of the pipeline.
9 high tip should also be installed in the outlet pipe check valve, in order to prevent sudden shutdown of the water hammer damage
10 must ensure that the installation height of the pump in line with the pump cavitation, and consider the loss of pipeline and medium temperature
11 medium temperature is too high when the machine should take measures to seal the closet, in order to prevent mechanical seal deformation, static ring cracking.