● SKSZ series rotary flash dryer

Schematic diagram of structure :

Working principle: The hot air is rotated from the bottom of the drying machine into the mixing and crushing and drying chamber, and the material has a strong shearing, blowing and rotating action. So the material is centrifugal, shear, collision, friction and be fine, strengthen the heat transfer. At the bottom of the dryer, the larger and more wet particles are crushed under the action of the agitator, and the particles with relatively low moisture content are entrained by the rotating air stream, and further drying in the rising process. As the gas solid two phase flow, the solid phase is larger than the gas phase, the solid phase is larger, and the two phase of the mass transfer heat transfer is enhanced, so the production intensity of the machine is high.
|
Characteristic : ● It is an organic combination of the technology of swirl flow, fluidization, spraying and crushing. ● Due to the centrifugal, shear, impact, friction and the particles were highly dispersed state and solid gas two phase of the relative enhanced heat and mass transfer, so that the production of high strength. ● Drying gas into the dryer at the bottom, a strong rotation of the flow, the wall of the material on the wall to produce a strong effect of erosion, eliminating the phenomenon of wall sticking. ● In the area of high temperature at the bottom of dryer, heat sensitive material does not contact with a hot surface, and equipped with special devices to solve the coking discoloration problem of thermal sensitive material. ● Due to the high gas velocity in the drying room, the material retention time is short, and the production of high efficiency, fast and small equipment is achieved. ● The size and humidity of the drying chamber is added and swirl ring elutriation can control the export of materials, in order to achieve different materials with water granularity requirements.
|
technical parameter Model | SKSZ200 | SKSZ400 | SKSZ600 | SKSZ800 | SKSZ1000 | SKSZ1200 | SKSZ1600 | Host ID mm | 200 | 400 | 600 | 800 | 1000 | 1200 | 1600 | Air volumem3/h | 350-500 | 1150-2000 | 2450-4500 | 4450-7550 | 7000-12500 | 10000-18000 | 18000-30500 | Evaporated water kg/h | 12-17 | 40-70 | 80-150 | 150-250 | 230-420 | 300-600 | 600-1000 | Installed capacity kw | 10 | 20 | 40 | 55 | 60 | 65 | 76 | Maximum heightm | 4.0 | 4.2 | 5.2 | 5.6 | 6.2 | 7.0 | 8.0 | Area covered m2 | 15 | 20 | 28 | 35 | 40 | 52 | 80 |
Note: 1 water evaporation is to enter the air temperature is 180 degrees Celsius, the air temperature is 80 degrees, evaporation of water per hour, the special material parameters will be changed. 2 in addition to the above models can be designed for users. |
The physical property of materials (with 600 flash for reference)
| Material name | Zinc stearate | Aluminum hydroxide | ZnCO3 | monosultap | TMTD0 | DSD | Iron oxide red | Two antimony oxide | Cuprous chloride | White carbon black | | Inlet air temperature | 150 | 180 | 150 | 120 | 140 | 150 | 200 | 180 | 200 | 280 | | Initial moisture content | 80 | 55 | 80 | 30 | 65 | 60 | 60 | 45 | 30 | 85 | | Final moisture content | 0.5 | 1.5 | 1.0 | 1.0 | 0.5 | 0.5 | 0.5 | 1.0 | 3.0 | 5.0 | Actual drying kg/h | 140-160 | 250-280 | 130-170 | 80-110 | 80-120 | 80-120 | 300-350 | 280-320 | 290-310 | 250-300 | | Material name | accelerator ZDC | Oil soluble ink | Mancozeb | phthalo blue | Calcium citrate | Superfine calcium carbonate | Mud treatment agent | Two sodium chloride, sodium chloride, sodium chloride | Three sodium chloride, sodium chloride, sodium chloride | | Inlet air temperature | 150 | 150 | 120 | 150 | 140 | 160 | 200 | 180 | 150 | | Initial moisture content | 60 | 45 | 30 | 55 | 40 | 70 | 75 | 25 | 30 | | Final moisture content | 0.5 | 2.0 | 1.0 | 1.0 | 1.0 | 1.5 | 5.0 | 0.2-2 | 1.0 | Actual drying kg/h | 80-110 | 350-380 | 120-150 | 160-180 | 300-350 | 430-470 | 290-310 | 80-120 | 90-150 |
● Organic compounds: atrazine (pesticides), lauric acid, benzoic acid, benzoic acid, sodium oxalate, Dan, sterilization, cellulose acetate etc.. ● Anthracene Dyes: Kunming, black oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, all kinds of azo dye intermediates. ● Inorganic: borax, calcium carbonate, hydroxide, copper sulfate, ferric oxide, barium carbonate, antimony oxide, three kinds of metal hydroxides, heavy metal salts synthetic cryolite etc.. ●Pottery and porcelain: kaolin, silicon dioxide, clay, etc.. ● Food: soy protein, gel starch, sprinkle grains, wheat sugar, wheat starch, etc.. ● Waste: biological mud, iron manganese slag, sugar aldehyde slag, etc.. |
|