Working principle of overload protection device 1.The fix jaw not moving is fixed on the inner wall of the crusher.
2.The motor through the pulley drives the eccentric wheel, so as to drive the movable jaw plate
to do the pendulum motion in order to crush the materials.
3.The hydraulic cylinder piston rod is connected with the liner, and hinged with the spring pull
rod at the lower part of movable jaw plate, this arrangement can determine the size of the
discharging port and the crushed granularity. When the materials whose strength is
exceeding the specified value are sent in the crushing chamber, the cylinder piston will retract
quickly to enlarge the discharge port in order to discharge the materials more strength.
4.After the materials of high strength are discharged automatically by their own weight, the
hydraulic control system supplies immediately the oil to the right chamber of cylinder making
the piston move left to the extreme position so to return the normal work.