RX-101 Digital Flying Fork Type Automatic Winding Machine
Product Details
RX-101 Digital Flying ForkAutomatic winding machineproduct manual
The use of microcomputer controller, easy to set the data, the winding shaft is driven by a stepping motor with a constant current circuit, the winding speed is fast, the accuracy is high, and the arc-shaped products (hollow arc and solid arc can be wound). The arc is less than 180 degrees, and the starting point, width, line distance, speed, etc. can be set in sections to achieve multi-step and multi-speed purposes. 999 steps can be set, and the set value can be stored for more than one year.
Digital Flying ForkRing type winding machineThe difference between double-layer winding and single-layer winding is as follows:
First, relatively speaking, double-layer windings that cannot be completed by single-layer windings can be achieved for special needs, such as fractional slots and pole-changing.
Second, relatively speaking, the double-layer winding is less wire-saving.
Third, when the voltage is critically low, the double-layer winding can start, but the single-layer winding cannot start.
Fourth, the upper and lower windings of the double-layer winding are sometimes not necessarily one phase. Relatively speaking, the phase-to-phase insulation is not as good as the single-layer winding.
5. Single-layer winding is one side with one coil embedded in each slot, and double-layer winding is one side with two coils embedded in each slot.
The winding machine is driven by the motor to drive the reversing intermediate wheel and then the small wheel on the rotating shaft. One turn of the big wheel by hand, the shaft can make a few more turns. The wire frame is fixed on the shaft with a counter, and the number of turns is sensed when the shaft rotates. The device displays the number of turns, so that you know the number of winding turns. If you wind a large coil, you can put the handle on the shaft and turn the handle once to save effort. Automatic winding machine, when the set number of turns is reached, it will automatically stop.
At present, the most widely used model is also called automatic winding machine, which can automatically arrange the wires and complete different winding requirements with different mechanical structures. It has many advantages such as high efficiency, convenient maintenance, and high cost performance. Domestic manufacturers generally We use Weihua electronic machinery factory controllers, and some manufacturers use self-developed controllers as the control core. Weihua electronic machinery factory models are already a very mature model. Weihua electronic machinery manufacturers have functions and uses. All have been innovated and upgraded, and the series of products used have been continuously extended. As the most widely used model on the market,Fishing line winding machineThe price is much lower than the price of tens of thousands of yuan for fully automatic winding, and the price ranges from thousands to tens of thousands depending on the purpose. At present, the application of this model can be seen in some occasions such as the production of ballasts and inductors.