Welcome Customer !

Membership

Guangdong Jingtian Environmental Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 膜元件

Xwboo>Products

Guangdong Jingtian Environmental Technology Co., Ltd.Free·1YRS

  • E-mail

  • Phone

    075786519285

  • Address

    Jingtian Industrial Park, Shazui Industrial Zone, Jiujiang Town, Nanhai District, Foshan City, Guangdong Province

Contact Now

Reinforced Lined Film

Model
Nature of the Manufacturer
Other
Product Category
Membrane element
Place of Origin
FoShan City, GuangDong Province
Overview
Product Brief:Sedum's MBR hollow fiber membrane is consistent with the interface specifications of mainstream brands such as Mineng, Mitsubishi, Toray and other well-known brands in the industry. It can achieve the replacement effect of the same performance at a replacement cost of 60~70%. It is widely used in domestic sewage and low-concentration industries. MBR process application system for sewage, etc.; and reinforced lined membrane, because of its high-strength structural performance of membrane fil......
Product Details

  • Features
    1. Anti-pollution and anti-attenuation
    The new generation of MLD fouling-resistant PVDF hollow fiber membrane adopts a new formulation process, which completely improves the anti-fouling performance of the membrane from the membrane technology and microstructure, effectively slows down the membrane fouling rate, and greatly improves the operating flux of the membrane and the anti-attenuation of the membrane. ability.
    2. High mechanical strength, continuous wire
    The unique lining reinforced structure is adopted, and the breaking force of the membrane wire is more than 200N, which can effectively prevent the membrane wire breaking problem during the long-term operation of the membrane element.
    3. The effluent quality is high and stable
    The average pore size is about 0.1 μm, and the pore size distribution is uniform, which can effectively remove pollutants such as suspended solids, bacterial colloids, viruses, etc., and the effluent quality is excellent.
    4. Good hydrophilicity, easy to clean and restore
    Based on Meride's unique hydrophilic modification production process, the membrane module is permanently hydrophilic, which greatly improves the anti-fouling property of the membrane, reduces the cleaning requirements, and prolongs the service life of the membrane.

  • MBR membrane type MLDD-1010 MLDD-1520
    Membrane size (L*W*H) 571*45*1100mm 571*45*1510mm
    Water collection pipe OD32 UPVC OD32 UPVC
    Membrane weight (wet weight) 8kg 12kg
    Effective filter membrane area (㎡) 10㎡ 20㎡
    Membrane material Lining Reinforced PVDF
    Filter method External pressure suction filter
    Water collection pipe material ABS
    Bonding material Epoxy & Polyurethane
    Membrane Filtration Pore Size <0.1μm
    Membrane inner and outer diameter 1.0/2.1mm
    Effluent Turbidity <5 NTU
    Effluent suspended matter <1mg/L
    Membrane service life Standard use ≤5 years
    Membrane application conditions
    Design flux (L/Hr) 150-250 L/Hr 300-500L/Hr
    Membrane average aeration 2-4Nm³/h curtain
    Operation mode Negative pressure suction
    Applicable sludge concentration <15000mg/L
    proper temperature 5-45℃
    pH tolerance range 210
    Water production cycle Produce water for 9-12 minutes, stop for 2 minutes
    Membrane cleaning agent Sodium hypochlorite, hydrochloric acid, citric acid
    Chemical cleaning cycle 6-12 months
    Chemical cleaning agent Hydrochloric acid, sodium hydroxide
    Remarks: All the technical parameters in the table are only for customers' reference in the selection of sewage treatment applications; membrane products can be customized according to customer requirements and used flexibly.

Similar Product Recommend