一 、 Product introduction; fully meet your requirements for the use of ultrapure water
Reverse osmosis pure water machine can directly purify city tap water, groundwater, surface water into ultra-pure water used in laboratories (first-level, second-level, third-level), true-color LCD display, spray-proof case with anti-corrosion material casing, According to the healthy operating system, the service life of consumables can reach 2-3 years when the source water is less than 150PPM. The product is designed to be fully automatic control, without the need to manually clean the filter.
Four-level purification device for source water (removal: particulate matter, iron, manganese, residual chlorine, calcium, magnesium ions, adsorbed organic matter, odor, etc.)
The working power supply is 220V / 50Hz, and the voltage fluctuation rate is ± 10%.
Working conditions: water temperature 5-40 ℃, (northern areas need antifreeze rooms).
Source water indication
The system automatically flushes in 18 seconds when booting;
The system will automatically flush for 15 seconds if the discharge exceeds the standard;
Automatic flushing of reverse osmosis membrane in 15 seconds;
Alarm for consumable replacement;
The water tank is full of water;
Online monitoring of ultrapure water (≤0.1μs / cm)
V. Technical parameters of special ultrapure water machine series for biochemical analyzer
Model Desktop YY-SI-10L / 15L / 20L / 30L / H Floor-standing YY-SLI-40L / 50L / 60L / 80L / 100L / 120L / H
Influent water source Total dissolved solids content TDS <200ppm,
Water pressure 1.0-5.0kg / cm2,
The best working water temperature is 25 ℃, the total dissolved solid content TDS is less than 200ppm,
Water pressure 1.0-5.0kg / cm2,
The best working temperature is 25 ℃
Chassis material Anticorrosive plastic spray case Anticorrosive plastic spray case
Working power supply 220V / 50Hz, voltage fluctuation rate ± 10%. 220V / 50Hz, voltage fluctuation rate ± 10%.
Power (W) 30W-50W 50-100W
Water volume ≥10L / 15L / 20L / 30L / H ≥40L / 50L / 60L / 80L / 100L / 120L / H
Water flow rate 1.5-2.5 l / min (when the water tank is storing water) 1.8-3.5 l / min (when the water tank is storing water)
出 Water quality of ultrapure water (μs / cm) Conductivity ≤0.1μs / cm (online monitoring) Conductivity ≤0.1μs / cm (online monitoring)
Host size (mm) 380 * 500 * 590 380 * 580 * 850/380 * 580 * 950
Water quality pre-processor 10 inch 4-level purification device --- built-in 20 inch 4-level purification device --- built-in
Weight (kg) 40kg-50kg 80kg-90kg
Scope of application Ion chromatography (lC) / atomic emission (AES) microelectronics / environmental monitoring experiments / microanalysis
Gas / Liquid Chromatography (HPLC) Quantitative (PCR) / Qualitative Analysis / Trace Boron Analysis / Trace Metal
Atomic absorption (AA) / mass spectrometry (MC) PH / ISE / BOD / COP / RNase-free
Electrophoresis / gel analysis / transfer / hybrid enzyme analysis / kinetics / immunodiagnosis / dissolution experiments
Plasma Emission Spectroscopy (lCP) Hydroponics / Transfer / Hybridization / Digestion Experiment
Protein / Amino Acid Analysis Buffer--General Laboratory / Microbiology / Molecular Biology
Gas / liquid chromatography analysis (HPLC) glassware cleaning / college student experiment
Biochemical analysis / University experiment / Toxin detection Trace metal / Trace boron analysis
Animal / Immune Diagnostic Environmental Monitoring Laboratory
External pressure water tank 4G / 5G / 11G 11G / 20G / 28G
Optional PE water tank 40L / 50L 40L / 50L / 80L / 100L / 150L
Index Index content Metal cation content (ppb) Anion content (ppb)
Microbial content <1cfu / ml iron (Fe) <0.005 chlorine (Cl) <0.01ppb
Total organic carbon (TOC) ≤ 30ppb copper (Cu) <0.005 nitrite (NO) <0.02ppb
Content of heat source (endotoxin) <0.001Eu / ml potassium (K) <0.02 nitrate (NO) <0.02ppb
Capacitive silicon [as (sio2): ㎎ / L ﹤ 0.01 Aluminum (Al) <0.005 Sulfate (SO) <0.01ppb
Micro-particles <1 / ml zinc (Zn) <0.02
Absorbance (254nm, 1cm optical path: ≤0.001 Cr (Cr) <0.005
Oxidizable substances [as (0), ㎎ / L]: ≤0.01 Sodium (Na) <0.01
RNases < 0.01ng / ml
DNases < 4pg / ml
Instructions for use:
①The RO water outlet meets the low-demand water requirements such as daily cleaning of utensils and buffers, and generally accounts for 60-80% of the total laboratory water consumption. Because it is convenient and fast, if no one manages the water consumption, it will compare with the original distilled water boiler to boil water. Or the amount of water used to purchase water will be doubled, and the cost will be about 0.2 yuan / liter;
② The UP effluent mainly meets the needs of high-end water and instrument water, which generally accounts for 10-30% of the total laboratory water. When using it, pay attention to the principle of ready-to-use. For a long time, the conductivity will be caused by the entry of CO2 and other impurities in the air ( The resistance value) quickly rises (decreases) and cannot meet the requirements, and the use cost is about 0.8 yuan / liter.
③ The conductivity of the source water is ≥600μs / cm, it is recommended to be equipped with a fully automatic soft water system.