YY-softening functional filter element; Bloylite resin imported from the UK, which mainly reduces water hardness. Bloylite resin has a large exchange volume in water, which is 50% longer than domestic 001 * 7 cationic resin, which can extend the life of reverse osmosis and improve RO Desalination rate of water.
YY-UF ultrafiltration deep processing filter element; polypropylene (PP) hollow fiber membrane ultrafiltration membrane, which mainly removes organic substances in source water, can protect reverse osmosis and reduce TOC, and has a good effect.
Reverse osmosis purification system
RO(reverse osmosis)Reverse osmosis technology is a membrane separation and filtration technology using pressure difference as the driving force. Originated from aerospace science and technology research in the United States in the 1960s. The RO reverse osmosis membrane has a pore size as small as nanometers (1 nanometer is 10-9 meters). Under a certain pressure, H2O molecules can pass through the RO membrane, while impurities such as inorganic salt ions, organic matter, colloids, bacteria, and heat sources in the source water cannot. Through the RO membrane, the pure water that is permeable and the concentrated water that is permeable are strictly separated;
RO membrane can remove 99% of high-valent ions, colloidal bacteria and organic matter (including heat source) with molecular weight greater than 300Dalton, and 90-95% of low-priced ions (NA, K0). When the source water conductivity is <350μs / cm The conductivity of RO pure water is usually ≤5μs / cm. It meets the national standard of Grade 3 water use. The reverse osmosis method is the most economical method to achieve the removal rate of impurities of 90-95%. It is also the best method for ultrapure water Approach.
Post-treatment ultra-purification system
Ion exchange resin uses H + exchange to remove cations in the water, and OH- exchange to remove ions in the water. The H + and OH- replaced in the resin combine to form H2O. Special polishing resin for ultrapure water, its water resistivity can reach 18.2MΩ.cm.
Ion exchange is a traditional, mature process desalination equipment. Due to different equipment structures and technologies, such equipment can produce desalinated water, pure water, high-purity water, and ultra-pure water. Widely used in various industries such as electronics, machinery, chemical industry, shipping, food and beverage and medicine. According to the user's source water quality and water standards, various types of beds can be combined in various ways to meet the user's water quality standards. The control system can be divided into automatic and manual. The principle of ion exchange is that under certain conditions, functions such as softening, alkali removal, and salt removal can be achieved by relying on the exchange of certain ions of the ion exchanger (resin) itself with the isoelectric ions in the water to be treated.
Ultraviolet sterilization device: dual-wavelength ultraviolet sterilization device imported from the United States, UV effective wavelength: UV-185 / 254nm, life can be up to 9000 hours.
UF ultrafiltration device: cutoff molecular weight 5000DaIton, life can be up to 2-3 years.
Terminal microfiltration device: imported from Germany, the terminal microfiltration pore diameter is 0.2 micron, and the life can be as long as 1-2 years.
function introduction
Four-level purification device for source water (removal: particulate matter, iron, manganese, residual chlorine, calcium, magnesium ions, adsorbed organic matter, odor, etc.);
Automatic protection of source water at low water pressure;
220V / 50Hz power supply, voltage fluctuation rate ± 10%.
Working conditions: water temperature 5-40 ℃, (north area needs antifreeze room).
Source water indication
The system automatically flushes in 18 seconds when it is turned on;
The system automatically flushes for 15 seconds if the discharge exceeds the standard;
Automatic flushing of reverse osmosis membrane in 15 seconds;
Consumable replacement alarm;
Water tank full indication;
RO pure water (2-10μs / cm)
UP ultrapure water resistance online monitoring; (≥18.25MΩ.cm)

Technical parameters of YY-HL series of ultrapure water
Instructions for use:
① The RO water outlet meets the low-demand water requirements such as daily cleaning of utensils and buffers, and generally accounts for 60-80% of the total laboratory water consumption. Because it is convenient and fast, if no one manages the water consumption, it will compare with the original distilled water boiler to boil water. Or the amount of water used to purchase water will be doubled, and the cost will be about 0.2 yuan / liter;
② UP effluent mainly meets the demand for high-end water and instrument water, which generally accounts for 10-30% of the total laboratory water. When using it, pay attention to the principle of ready-to-use. For long time, the conductivity will be caused by the entry of CO2 and other impurities in the air The resistance value) quickly rises (decreases) and cannot meet the requirements. The use cost is about 0.8 yuan / liter.