Welcome Customer !

Membership

Jiangsu Blovebird Centrifuge Co., Ltd.
Free Member ·1YRS
ZhangJiaGang,JiangSu
Manufacturer

Main Products: Centrifuge

Xwboo>Products

Jiangsu Blovebird Centrifuge Co., Ltd.Free·1YRS

  • E-mail

  • Phone

    86-0512-58575858

  • Address

    202 County Road,Sanxing,Jinfeng Town, Zhangjiagang City,Jiangsu Province

Contact Now

PD SERIESVertical Centrifuge

Model
Nature of the Manufacturer
Manufacturer
Product Category
Vertical Centrifuge
Place of Origin
ZhangJiaGang City, JiangSu Province
Overview
Blovebird series of PD for punching bag on discharge, intermittent operation of filtering centrifuge, the series of centrifuge has simple structure, reliable performance, convenient operation and maintenance, and filtering time can grasp, residue can fully wash, solid phase is not easy to damage, the advantages of strong adaptability, due to the lower discharge reduced the labor intensity, widely used in chemical industry, light industry, food, pharmacy, metallurgy and other departments, is SS/PS series centrifuge ......
Product Details
PD Series Introduction
Blovebird series of PD for punching bag on discharge, intermittent operation of filtering centrifuge, the series of centrifuge has simple structure, reliable performance, convenient operation and maintenance, and filtering time can grasp, residue can fully wash, solid phase is not easy to damage, the advantages of strong adaptability, due to the lower discharge reduced the labor intensity, widely used in chemical industry, light industry, food, pharmacy, metallurgy and other departments, is SS/PS series centrifuge better alternatives.
Simple Structure
Easy to Clean
Airtight Operation
GMP Compliance
Configuration Optional

Working Principle

Under the action of centrifugal force, the material tends to the drum wall, the liquid phase passes through the filter hole of the drum wall through the filter medium covered on the drum wall, tends to the inner wall of the shell, falls into the chassis, and is discharged through the liquid outlet. The solid materials are stored in the drum and can be fully washed, so as to complete the solid-liquid separation. After shutdown, open the shell flap, use the special lifting device to take out the filter bag to the blanking place for unloading. After unloading, install the liquid blocking plate and filter bag into the drum again, lock the liquid blocking plate, close the upper flap, and start the next working cycle after locking.
Product Features

Inverter Start
Inverter is used to start, smooth start, separation factor adjustable.
Lifting Bag Unloading
Lifting bag unloading, low labor intensity, high efficiency.
Reasonable Structural Design
Reasonable structural design, effective elimination of sanitary dead spots, smooth filtering of structural parts, polished surface, external structural parts, fasteners and drum are made of stainless steel.The shell is clamshell type, which can thoroughly clean the shell of the centrifuge and the sandwich space of the drum.
Online Cleaning System
Equipped with an online cleaning system, the centrifuge can be cleaned online, and the invisible parts inside the centrifuge, such as the inner wall of the centrifuge shell, the inner and outer surface of the rotating drum, and the surface of the collecting tank, etc.Comply with the requirement of GMP specification for equipment.
Simple Structure
Simple structure, convenient operation and maintenance.
Grains
Grains are not easily broken.
Nitrogen Protection System
Nitrogen protection system is configured to ensure the isolation between the inner cavity of the centrifuge and the external air.
Strong Versatility
Strong versatility and wide application range.
Closed Structure
Closed structure, silicone rubber or fluorine rubber seals.It can meet the requirements of airtight explosion protection and is suitable for toxic, flammable and explosive occasions
Product Configuration


The shell is equipped with clamshell and feed pipe, washing pipe, viewing mirror, exhaust port, lighting hole: The sealed structure, drum and shell, clamshell and other parts are made of stainless steel (SUS304).

All fasteners are stainless steel.

Transmission and braking: ordinary motor (or explosion-proof motor) + frequency converter + energy saving braking.

The machine is equipped with a set of special spreader when leaving the factory.

The clamshell is powered by a spring.

Hydraulic automatic clamshell.

In-line cleaning system.

Nitrogen protection system.

According to the corrosion protection requirements of the separators, the corresponding stainless steel shall be adopted Steel Section (SUS304, 316L, 321, etc.).

ModelBowl Diameter
(mm)
Speed
(r/min)
Separation FactorDrum Volume
(L)
Loading Limit
(kg)
Power of Motor
(kw)
Weight
(kg)
Dimension
(mm)
PD80080012006451001407.515001800X1200X1350
PD1000100010006501552001125002050X1500X1350
PD1250125097064537050018.533002300X1800X1580
PD150015008706056008002255002600X2200X1850
PD1600160087064780010003775003000X2200X1980
PD18001800720522910120045100003200X2550X2150