Welcome Customer !

Membership

Nanjing Richter Heat Energy Equipment Co., Ltd.
Free Member ·1YRS
NanJing,JiangSu
Manufacturer

Main Products: heat transfer machine

Xwboo>Products
Product Categories

Nanjing Richter Heat Energy Equipment Co., Ltd.Free·1YRS

  • E-mail

    sale1@njrct.com

  • Phone

    025-83243112

  • Address

    4 Zifeng Research Center, No. 29 Buyue Road, Qiaolin Street, Pukou Economic Development Zone, Nanjing

Contact Now

4 in 1 Heat Exchanger and Water-oil Separator Module for Refrigerated Air Dryer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
NanJing City, JiangSu Province
Overview
4 in 1 Heat Exchanger and Water-oil Separator Module for Refrigerated Air Dryer
Product Details

General 
4 in 1 heat exchanger and water-oil separator module is our patent product and it is designed specially for the refrigerated air dryer. It consists of precooler (air to air plate fin heat exchanger), evaporator (air to refrigerant plate fin heat exchanger) and stainless steel mesh gas-liquid separator filter. It has four functions: precooling, cooling, separation and filtration. There is insulating layer outside of this unit in order to reduce the loss of heat and increase the effectiveness. 


Structure Sketch of 4 in 1 Horizontal Heat Exchanger
Structure Sketch of 4 in 1 Vertical Heat Exchanger

The main performance of the air-air heat exchanger is to make the best use of energy (cool energy) and avoid the ectotheca of discharge pipe covering dew due to low temperature. 4 in 1 heat exchanger synthesize the performance of air-air heat exchanger and air-refrigerant heat exchanger together and no pipes between them. So it reduces the size of this unit. Precooler and evaporator are both aluminum vacuum brazed plate-fin heat exchangers. Compared with shell and tube heat exchanger in traditional refrigerated air dryer, the heat transfer area of plate-fin heat exchanger is larger and so the exchanger effectiveness is higher. Generally, the heat transfer area density of plate-fin heat exchanger can be 1500m2/m3, but the shell and tube heat exchanger’s is only about 160m2/m3. And the heat transfer coefficient of plate-fin heat exchanger is 5-10 times higher than shell and tube heat exchanger. 


Sectional View of 4 in 1 Horizontal Heat Exchanger 
Sectional View of 4 in 1 Vertical Heat Exchanger 

Air-water separator uses optimized spiral guide structure and the main principle is to separate the liquid and gas according to the difference of the liquid weight and gas weight and using gas flow direction and the inertia of speed changing. Mesh filter is made of some steel mesh and it can filtrate air secondary to increase the dry efficiency.
Features and advantages
(1)Compact size:
- Reduces the total air dryer size
- Significantly reduces the refrigerant hold-up volume
(2)Highly efficient thermal performance and low pressure drop minimizes power usage.
(3)Low price.
(4)Easy to repair and long service life.
(5)Full compatibility with the most common refrigerants.
Testing
All of our 4 in 1 heat exchangers undergo a hydrostatic test of 1.5 times the design pressure with water for 30 minutes and a leak test of 1.1 times the design pressure with air for 10 minutes for the air side. After passed by the above tests, each unit is to perform 24 hours’ keeping pressure of 18bar and conduct helium test for the refrigerant side, respectively.
Certificate of patent

General Data of 4 in 1 Horizontal Heat Exchanger