1.The cut-off sugarcane harvester can simultaneously complete the sugarcane lifting up, dividing, top and root cutting, feeding, conveying, cutting, separating, fruit unloading and so on, which has advantages of less auxiliary work and high work efficiency.
2.The cut-off sugarcane harvester has wider adaptability to the growth conditions of sugarcane, especially to the harvest of lodging sugarcane and soft sugarcane. Compared with the whole stem harvesting machine, the cut-off sugarcane harvester works much faster.
3.Equipped with Yuchai frequency conversion engine model YCA05190-T300, the power is up to 190HP.
4.The machine can switch power autonomously during walking and working, so as to realize low fuel consumption and high efficiency.
5.The header separator uses 4 cone rollers with spiral leads to easily separate the sugarcane, benefiting harvesting sugarcane.
6.The large disc cutters work faster, avoiding sugarcane root, and benefiting Sugarcane Perennial Root geminate. The clearance between disc cutters is 10mm, preventing sugarcane falling. 7. ①Sugarcane is cut by 2 pairs of disc cutters, The upper and lower knives adopt scissors blade edge, and the sugarcane can be neatly cut. ②The disc cutters equipped with throwing blade, integrating with cutting and throwing, greatly improves work efficiency.
8. The fan speed can be adjusted; the air can be adjusted according to the actual growth of sugarcane.
9.Configured with 8-inch LCD display with integration of Beidou navigation system and 4G communication.①Real-time acquisition of vehicle location, operation trajectory and other information ②Keep monitoring engine speed, water temperature, oil pressure, and engine failures.③Full sets of sensors for fuel, hydraulic oil, system pressure, stuck etc.④Reverse Image for monitoring sugarcane hopper status.Record all failures, and prompt maintenance in time. The programming controller matches with operation keys, and sensors to realize logic and automation control of the whole machine.
| No. | Item | Unit | Specifications |
| 1 | Model | / | 4GQ-1 |
| 2 | Structure | / | Self-propelled |
| 3 | Harvesting Type | / | Cutting |
| 4 | Number of Harvesting Rows | row | 1 |
| 5 | Row Spacing | m | >=1.2m |
| 6 | Engine | Manufacturer | / | Corn |
| Model No | / | YCA05190-T300 |
| Rated Power | kW | 140 |
| Rotating Speed | r/min | 2200 |
| 7 | Dimension | Working(LxWxH) | mm | 8600x2120x4000 |
| Transportation(LxWxH) | mm | 7100x2560x3660 |
| 8 | Tyre | Front | Tyre Model | / | 10.5/65-16 |
| Gauge | m | 1510 |
| Number | pc | 2 |
| Rear | Tyre Model | / | 14.9-28 |
| Gauge | m | 1560 |
| Number | pc | 2 |
| Wheelbase | mm | 2528 |
| 9 | Walk Drive Type | / | Hydrostatic Drive |
| 10 | Threoretical Walk Speed | km/h | 0~25 |
| 11 | Weight | kg | 8260 |
| 12 | Minimun Ground Clearance | mm | 260 |
| 13 | Feeding Capacity | kg/s | ≥4.5 |
| 14 | Work Efficiency | hm2/h | ≥0.24 |
Note: The parameters in the above table are only for your reference. Specifications subject to change without notification. |