Welcome Customer !

Membership

Maxtron International Ltd.
Free Member ·1YRS
,
Other

Main Products: 编码器

Xwboo>Products

Maxtron International Ltd.Free·1YRS

  • E-mail

    sales@maxtronsystem.com

  • Phone

    86075582774896

  • Address

    Room 202B, building G2, Tcl Science Park, 1001 Zhongshan Garden Road, Xili Street, Nanshan district, Shenzhen City

Contact Now

Maevex 6150 Quad 4K Enterprise Encoder Appliance

Model
Nature of the Manufacturer
Other
Product Category
AV over IP
Place of Origin
City, Province
Overview
Experience flexible 4K multi streaming & recordingThe Matrox® Maevex 6150 quad 4K encoder appliance is the first in the world to deliver quad 4K input capture and encode, supporting at least four concurrent 4K streams and recordings—simultaneously. Delivering the full feature set of the Maevex 6100 quad encoder card, the Maevex 6150 comes in a convenient, rack-ready appliance form factor with added I/O.Coupled with Maevex PowerStream Plus software, the Maevex 6150 quad 4K enterprise encoder delivers reliable indust......
Product Details

The Matrox Maevex 6150 appliance is part of the Maevex 6100 Series. Built on H.264, this plug-and-play solution fits seamlessly into existing infrastructures and interoperates with virtually any network device, ensuring high-density content distribution and system scalability. Flexible setup and management of all devices and features from one easy-to-use interface comes via complimentary Maevex PowerStream Plus software.

Industry-leading technology

The Maevex 6150 quad 4K enterprise encoder is the first in the world to drive simultaneous quad 4K/UHD and Full HD capture, encode, stream, and record from a single standalone appliance. Integrating seamlessly with standard 1 Gigabit Ethernet networks, Maevex 6150 includes zero-latency pass-through for real-time output of audio/video content on up to four 4K displays.

时钟显示零延时
Maevex 6120的LCD屏幕和按钮
An on-device LCD display shows device IP and stream addresses, system information, and other urgent content, allowing for easy installation and troubleshooting issues directly on the device. Adding a separate monitor allows for previewing media and ensuring content appears exactly as intended before transmission. Six on-appliance buttons—to read and/or control the LCD display and start/stop streaming and recording functions—permit direct command execution in instances where software access is limited. Additional I/O for audio and USB connections ensures the functionality necessary for any installation.
Benefit from up to 4K/UHD 4:4:4 sub-sampling support plus H.264 capability for best-in-breed encoding. Maevex’s versatile PowerStream Plus software supports multi-protocol and multi-bitrate streaming, chroma sub-sampling management, multiple Picture-in-Picture (PiP) and quadrant composite options, and more. The multi-chroma sub-sampling feature delivers 4:4:4, 4:2:2, 4:2:0, and 4:0:0 options, to best balance bitrate and compression demands of different encoding environments and markets.

Our technology promises unprecedented quality, without necessarily needing a dedicated distribution network; we use existing 1 Gigabit Ethernet infrastructure and expand its capabilities to allow for many streams of any quality to be transmitted on a single cable.

4K云技术、6120设备和PowerStream Plus软件
二路4K编码器安装在机架上

Flexible communication

The Maevex 6150 provides system independence and eliminates the need for additional equipment; simply place the appliance on the desktop, workstation, or rack, and it’s ready to use.

Support up to four channels of 4K real-time encode/stream from a single, standalone appliance housed in a 1U ½ width. It also allows for 1U dual-density and up to eight 4K streams and recordings from a single U of rack space.

The Maevex 6150 quad 4K appliance allows for simultaneous streaming, processing, and recording on all channels in multiple settings—all without sacrificing quality. This powerful appliance delivers content to on-premises end points, to the cloud and internet services, and also record for later editing and viewing, concurrently. Maevex 6150 can also transmit live and/or recorded content for multiple video-on-demand platforms—such as Facebook Live, Youtube, Twitch, Wowza®, Ustream™, LiveScale, and Restream to name a few.

H.264 technology meets almost every need and requirement for streaming and recording at excellent quality with minimal network bandwidth consumption—including at 4K. It also allows for delivery of multiple streams of almost every type of content over standard 1 Gigabit Ethernet networks; network streams or recordings can then be decoded using virtually any device. Customizable settings on each independent channel provide powerful scaling and deinterlacing to ensure only pristine graphics and video are encoded.


PowerStream Plus图标

Complete reach and control

Discover devices, manage content, access hardware, and monitor all streams and recordings from any location on the network via the robust Maevex PowerStream Plus software. Included with the purchase of Maevex hardware, PowerStream Plus renders both generations of Maevex products entirely monitorable, configurable, manageable, and updateable via an intuitive and easy-to-use application. PowerStream Plus can be installed on any network-connected computer.

Easily tailor operations by integrating PowerStream Plus features into existing applications or create new software applications with the PowerStream Plus API—available for both Windows® and Linux®. A REST API is also available for more flexible and portable software development and more direct access to Maevex devices.


PowerStream Plus API

Maevex 6150 quad 4K enterprise encoder appliance provides a myriad of flexible workflow options. Build upon multiple channels of 4K/UHD and Full HD encode/stream/record, each offering multi-protocol support. Ensure immaculate display with customizable color sampling options and downstream device and application support.

Maevex 6150 quad 4K enterprise encoder appliance provides a myriad of flexible workflow options. Build upon multiple channels of 4K/UHD and Full HD encode/stream/record, each offering multi-protocol support. Ensure immaculate display with customizable color sampling options and downstream device and application support.

Connectivity
Form FactorStandalone appliance
Rack-mountable (1U dual-density)
Maximum Number of Cards per SystemSystem dependent
Multi-Appliance SupportYes
Supported Video Input Formats4x HDMI (Type A)
Performance
Color Space CaptureRGB and YUV 8- and 10-bit support
Color space conversion support
Chroma Sub-Sampling4:4:4 (8-bit)
4:2:2 (8-bit)
4:2:0 (8-bit and 10-bit)
4:0:0 (8-bit and 10-bit)
Video Input4x HDMI (Type A) with audio support
Video Output/Pass-Through4x HDMI (Type A) with audio support
Video Monitoring Output11x DisplayPort 1.1
Audio Input4x HDMI digital LPCM two-channel stereo audio
4x 3.5 mm analog stereo audio
1x 3.5 mm stereo mic in
Audio Output4x HDMI digital LPCM two-channel stereo audio
1x 3.5 mm headphones out
RS-2321x for IP to RS-232 control
USB Support2x USB 2.0 (front)
1x USB 3.0 (back)
Maximum Capture Resolution2x 3840x2160 @60Hz2 or
2x 4096x2160 @60Hz2
4x 3840x2160 @30Hz or
4x 4096x2160 @30Hz
Support for Custom ResolutionsProject dependent; please contact Matrox for details
Encoding
Video Encoding Formats (Codecs)H.264/MPEG-4 Part 10 (AVC)
Encoding Capability
(Maximum and Other Examples)3

@ 4:2:0

@ 4:4:4

2x 3840x2160 @60Hz
1x 4096x2160 @60Hz
4x 3840x2160 @30Hz
3x 4096x2160 @30Hz
4x 1920x1080 @60Hz
8x 1920x1080 @60Hz
16x 1920x1080 @30Hz
1x 3840x2160 @30Hz
1x 4096x2160 @30Hz
2x 1920x1080 @60Hz
3x 1920x1080 @60Hz
6x 1920x1080 @30Hz
Encoding ProfilesBaseline (BP)
Main (MP)
High (HiP)
High 10 (Hi10P)
High 4:2:2 (Hi422P)
High 4:4:4 predictive profile separate plane (Hi444PP)
CAVLC 4:4:4 intra (44)
Encoding LevelUp to 5.2
Bitrate Range50 Kbps to 120 Mbps4
15 Mbps (default)
Rate ControlCBR
VBR
Favor quality (optimize for desktop or latency)
Adjustable GOP size
Audio Encoding Format (Codec)MPEG-4 AAC-LC/HEv1/HEv2
Audio Sample Frequency32 kHz
44.1 kHz
48 kHz
Audio BitratesUp to 576 Kbps (AAC-LC)
Up to 288 Kbps (AAC-HEv1)
Up to 144 Kbps (AAC-HEv2)
Video CompositingYes, fixed formats including Picture-in-Picture (PiP), Picture-by-Picture (PbP), quadrant
ScalingYes
Recording
Recording File FormatMP4
fMP4 **available Q3 2019**
MOV **available Q3 2019**
FilenameCustomizable prefix (optional)
TimestampAutomatic in filename
Recording ProgrammabilityStart date and time
Duration
Maximum file length
File frequency
Recording LocationsShared network drive or NAS
Local USB ports for USB flash drive and external hard drive
2x USB 2.0 (front) and 1x USB 3.0 (back)
Network
Network Connector2x RJ45 with status LED indicators
1x control and stream
1x stream only
Network Standard100/1,000 base-T Ethernet
Auto speed
Half/full duplex
Unicast, multi-unicast, multicast
Command and ControlHTTPS over TCP
UPnP (discovery)
Streaming ProtocolsRTSP (TCP), RTCP & RTP (UDP) - all required
RTP/RTCP (both required) over UDP
SRT over UDP
RTMP
MPEG2.TS over UDP
HLS **available Q3 2019**
IP AddressingIPv4 support
IPv6 support **available Q3 2019**
DHCP (default) and static IP address support
Physical
Noise Emission~25 dB at full stream/record capacity5
Product Dimensions (Length x Width X Height)8.53 x 7.52 x 1.68 inches (21.7 x 19.1 x 4.3 cm)
Power Supply100-240 VAC in, 12 VDC out, 60W
DIN4 locking power connector
Power Cords IncludedUS, EU, UK, Aus/NZ
Environmental
Operating Temperature Range0 to 45 degrees Celsius
Storage Temperature Range-40 to 70 degrees Celsius
Operating Humidity Range20% to 80% non-condensing
Storage Humidity Range10% to 90% non-condensing
Operating Altitude Range650 hPa (3,580 m) to 1,013 hPa (0 m)
Storage Altitude Range192 hPa (12,000 m) to 1,020 hPa (-50 m)
Maximum Power Consumption45W
EMC/EMI Device ClassClass A
EMC/EMI CertificationsFCC (US)
CE (EU)
RCM (Aus/NZ)
VCCI (Japan)
KC (Korea)
ICES-3 (Canada)
Environmental CertificationsEU RoHS
China RoHS
REACH
WEEE
Software
PowerStream Plus (free download)6Compatible with Maevex 5100 Series and Maevex 6100 Series
Network discovery
Multi-encoding and recording management
Multi-protocol management
Frame rate management
Resolution control
Administrator and user credential management
Scaling management
SNMP support
PowerStream Plus API for Windows and Linux6Full-access to entire feature set via API
.NET 4.5.1 or higher, standalone library and Mono 5.2 or higher for Linux
REST API6Maevex 6100 Series REST API
Available for lower-level development
Supported Operating Systems-Microsoft® Windows® 10 (64-bit)
- Windows Server® 2016 R2
- Windows 7 (32-bit, 64-bit)
- Windows Server 2008 R2
General
Warranty2 years
Part numberMVX-E6150-4
Accessories (Sold Separately)
Optional HardwareMaevex 5100 Series encoders (MVX-E5150F)
Maevex 5100 Series decoders (MVX-D5150F)
Maevex 5100 Series encoder/decoder bundle (MVX-ED5150F)
Maevex 6150 Rackmount Kit (RMK-19TR-A)
Secure HDMI cable solution (SK-SLNA-0F)

1Maximum resolution 1920x1080.
2Requires specific source timings, in YUV 4:2:0, 12 bits per pixel (8 bits per component); contact Matrox for more details.
3Each encoding capability is independent of the others listed, and excludes any additional processing such as compositing, scaling, etc. Content can affect results. Contact Matrox for more details and encoding capability support.
4Maximum operational bitrate per stream is dependent on number of streams and features enabled.
5Refers to Maevex 6150 units with RoHS date of January 2018 or later.
6Contact Matrox for more details.

Many Markets. Endless Possibilities.

Matrox video-over-IP products are a perfect fit for many applications. Have a specific idea in mind? Contact our sales team and work together to build a solution.

Digital signage installation in subway station

Digital Signage

Healthcare

Military

Empty government chamberBoardroom with large table, video screens on far wallCrowd facing stained glass windows in house of worship

Government

Corporate Communications

House of Worship

Scientists at workstations in labLecture auditorium of students, teacher at podiumIndustrial smokestacks with steam emerging

Science & Technology

Education

Industrial, Automation & Production

Security camera facing parking lot of trucksGroup of people around table looking at screenMany picture-in-picture screens

Security

Video on Demand

OTT Services



Award-winning Maevex 6150 quad 4K enterprise encoder appliance
Award-winning Maevex 6150 quad 4K enterprise encoder appliance

Maevex 6150 quad 4K encoder appliance provides a myriad of flexible workflow options. Build upon multiple channels of 4K/UHD and Full HD encode/stream/record, each offering multi-protocol support. Ensure immaculate display with customizable color sampling options and downstream device and application support.
Maevex 6150 quad 4K encoder appliance provides a myriad of flexible workflow options. Build upon multiple channels of 4K/UHD and Full HD encode/stream/record, each offering multi-protocol support. Ensure immaculate display with customizable color sampling options and downstream device and application support.

The flexible communication and powerful reach offered by the cutting-edge Matrox Maevex 6100 Series quad 4K enterprise card and appliance is an ideal solution anywhere AV-over-IP is required.
The flexible communication and powerful reach offered by the cutting-edge Matrox Maevex 6100 Series quad 4K enterprise card and appliance is an ideal solution anywhere AV-over-IP is required.

Matrox PowerStream Plus software allows administrators to easily adjust Maevex encoding parameters, including audio and video bitrates, video encode resolution, frame rate, and even H.264-detailed stream parameters.
Matrox PowerStream Plus software allows administrators to easily adjust Maevex encoding parameters, including audio and video bitrates, video encode resolution, frame rate, and even H.264-detailed stream parameters.

Network administrators can use Matrox PowerStream Plus software to remotely discover and monitor the status of all Maevex encoders and decoders on the subnet, as well as units added outside the subnet, allowing for fine-tuning of encode/decode parameters.
Network administrators can use Matrox PowerStream Plus software to remotely discover and monitor the status of all Maevex encoders and decoders on the subnet, as well as units added outside the subnet, allowing for fine-tuning of encode/decode parameters.

Maevex 6150 quad 4K enterprise encoder appliance delivers industry-leading technology for flexible communication and complete reach and control over networked operations.
Maevex 6150 quad 4K enterprise encoder appliance delivers industry-leading technology for flexible communication and complete reach and control over networked operations.

On-device LED display shows device IP and stream addresses, system information, and other urgent content.
On-device LED display shows device IP and stream addresses, system information, and other urgent content.
Six on-appliance buttons permit direct command execution in instances where software access is limited.

Maevex PowerStream Plus Software and APIs for Complete Reach and Control

Maevex PowerStream Plus is the most advanced AV-over-IP software management tool on the market, a game-changer in terms of software and system capabilities. This powerful software application provides complete reach and control over the entire Maevex network topology through an easy-to-use interface.

Boasting compatibility with the complete Maevex family of products—Maevex 6100 Series, as well as Maevex 5100 Series—PowerStream Plus delivers remote control over all network-connected units from one central location. Operators gain flexibility over all network connections—zoom out for a macro-level overview of the entire Maevex infrastructure, and drill in on particular units or groups to fine-tune parameters for each stream within a given device.

PowerStream Plus offers three levels of implementation to best suit any need:


PowerStream Plus for
easy deployment



PowerStream Plus API for
Windows & Linux and REST API
for rapid customization



White-label
re-branding solutions