Welcome Customer !

Membership

Zhongcheng Technology Co., Ltd.
Free Member ·1YRS
LiShui,ZheJiang
Manufacturer

Main Products: Actuators

Xwboo>Products

Zhongcheng Technology Co., Ltd.Free·1YRS

  • E-mail

    zc@chinazocn.com

  • Phone

    86-578-2978989

  • Address

    No.785, Jiangnan Road, Shuige Industrial Zone, Liandu District, Lishui City, Zhejiang Province, China

Contact Now

Cam rotor pump

Model
Nature of the Manufacturer
Manufacturer
Product Category
Cam rotor pump
Place of Origin
City, Province
Overview
Cam rotor pump
Product Details
1 Overview
The lobe rotor pump is a self-priming, valveless, positive displacement positive displacement pump. It drives a pair of rotors to rotate in opposite directions through a synchronous gear, and uses a small sealed cavity formed between the rotor and the pump casing as a channel to transport liquid media. The working process is: rotor operation-negative pressure formed at the pump inlet-pump sucks in liquid medium-liquid medium is filled into the pump cavity-liquid medium is pushed to the outlet end. The pump runs smoothly with almost no pulsation. The pump has a symmetrical structure and the conveying direction is reversible; it can be pumped forward and flushed backwards by changing the direction of rotation. The product has been widely used in many fields such as water treatment, petrochemical, heavy industry and mining, slurry, food, and field fire protection.


2. Performance characteristics and advantages
◇Applicable medium: The cam rotor pump adopts non-clogging design and has strong passing capacity. It is suitable for conveying mixed media with high viscosity, solid content less than or equal to 40%, and particles less than 6cm.
◇It can realize the mixed transportation of gas, liquid and solid. Such as block materials, fibers, hair, branches, plastics, etc., and will not be blocked.
◇Stable operation, short transmission route, capable of conveying toxic and sensitive media (such as liquid explosives).
◇Positive displacement pump, the displacement is proportional to the speed, can be used as a constant flow pump, the accuracy can reach 1%-2%. The flow rate is 0.2-1530m3/h. The pressure head can reach 12bar, and the special design can reach 18bar.
◇Strong self-priming ability, good anti-cavitation performance and high efficiency. The self-priming height is up to 8.5m, (considering the viscosity of the medium, the model is generally selected according to 5-8 meters), and the efficiency is 65%-90%.
◇The structure is completely symmetrical and the running direction is reversible. There are two functions of forward rotation suction, reverse rotation flushing, loading and unloading.
◇The spiral cam rotor makes pure rolling and low friction. The large pump cavity has low shearing effect on the medium and effectively prevents the medium from emulsification. The cam rotor is supported by three bearings, the rigidity of the rotating shaft is high, and the bearing life is long; the medium has no pulse, the whole machine has low vibration and low noise.
◇Balanced mechanical seal (one pair of inner seal and outer seal) and equipped with pressurized buffer coolant, the medium cannot penetrate the gear box and the outside of the pump body, and it will not come into contact with the air and pollute the environment.
◇There is an independent sealed cavity, which is always lubricated. When the material is cut, it is allowed to run for a short time.
◇The wear-resistant plate is made of composite wear-resistant materials and has a long life.
◇The whole machine has a compact structure and a small footprint, accounting for less than 70% of the space of the centrifugal pump and screw pump of the same specification. There is no need to move pipelines or special tools for maintenance and repair. Few spare parts.
◇It can replace some screw pumps, vacuum pumps, gear pumps and vane pumps.
Similar Product Recommend