GYH Series Edible Oil Filling Machine by Measure Cup

Features

• Compact structured, good-looking, easy to operate and highly automated.

• Parts with contact with material are all made of stainless steel of food-grade, no dead angles and easy to clean up.

• Filling volume is controlled by measure cup to ensure accurate filling.

• Air blowing after filling to ensure no dripping.

• Liquid buffer element specially designed inside filling valves can eliminate the cutting affection and wallop between liquid and container, easy to eliminate the air bubble in material.

• Highly effective cap sorting and feed in system is protective for feed in and cap absence.

• Equipped with overload system to safeguard machine and operators.

• Equipped with cap absence detector and bottle jam-up detector, which could stop the monoblock in that case.

• Equipped with output calculating function for monoblock.

• Main electronic components (touch screen, PLC and frequency inverter) are imported products.

Equipment Structure

Bottle infeed

Bottle infeed by combination of infeed screw and infeed starwheel.

Equipped with bottle jam protection device.

Measure Cup Filling Machine

The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck.

The filling system has liquid level automatic control.

Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it starts to fill.

Filling volume measured by cup with high accuracy.

Bottle is conveying by the wheel in the filling part.

Flip (Press-on) Capper

Conveyor wheel part

The material is combination of stainless steel and nylon and the wheel has block bottle protect device.

Machine Frame

• The machine frame is a welded structure of high quality carbon steel with the surface anti-rust treated and coated. The machine frame is wrapped with stainless steel sheet.

• Driving system of the 3-in-1 Unit is positioned under the machine table. One main motor provides driving power via gear transmission.

• The gear transmission system is an interleaved arrangement of steel gears and nylon gears.

• The output shaft of the main motor is equipped overload protection to secure machine safety.

Electronic control system part

The electronic components like PLC and transducer are from Schneider, Mitsubishi, Omron, etc., and the pneumatic devices are also from international famous brands.

Main Specification

• Touch screen: Mitsubishi

• PLC program controller: Mitsubishi

• Inverter: Mitsubishi

• Photoelectrical controller: Autonics

• Proximity switch: Autonics

• Other electrical components: Schneider

• Pneumatic component: Airtac

• Main motor: ABB