Welcome Customer !

Membership

Jiangsu Xingxing Drying Equipment Co.,Ltd.
Free Member ·1YRS
ChangZhou,JiangSu
Manufacturer

Main Products: Dryer

Xwboo>Products

Jiangsu Xingxing Drying Equipment Co.,Ltd.Free·1YRS

  • E-mail

    zar.dangxian@jxxcn.com

  • Phone

    0086-519-88903988

  • Address

    Jiaoxi Industrial Park, Tianning District, Changzhou City

Contact Now

XSG Series Spin Flash Dryer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drying Equipment Series
Place of Origin
City, Province
Overview
Product Introduction: XSG series flash roating dryer is developed by our factory. and It's techinology is based on advance techinology adorad. The machine is including many superioity, such as reasonabl...
Product Details

Descriptions

XSG series flash roating dryer is developed by our factory. and It's techinology is based on advance techinology adorad. The machine is including many superioity, such as reasonable design, compact stuction, widly utilization. great productive capacity. good quality, high effect and save energy. Drying, grinding and sieve are completed in one euqipment in once time. lt eliminate pollution and the technology reaches international 80' advanced level.


Principle

Hot air enters into stirring and crushing and drying chamber from the bottom of dryer with suitable atomizing speed lt exerts strong shearing. blowing, floating and rotating effect to raw materiaI. Therefore raw material is granulated through centrifuge. shearing, impacting and friction effect. lt strengthens the process of geat exchange. At the bottom of dryer. the lage and damp granule is crushed under the action of stirer and the granule that is small in partical and contain less moisture will lift accompainied with revolving air stream During the periaod of lift, it is dried further. Because gas and solid two phase flow in rotating and the intertia of solid phase is more than that of gas and the relative velocity between solid and gas phase is large, so it strengthens the process of heat exchange. Therefore the machine has strong drying capacity.


Features

●There are many kinds feding equipment for choosing, and feeding is continuous and static.

●At the bottom of dryer, where is high temperature area, heat sensitivity raw material can not contact with heat surface directly. therefore it solves the carbonized and changed color problems of heat sensitivity raw material.

●There are air pressure equipment and shaft equipment, so can prolong life of machine.

●There is special equipment for sharing wind, and raising the amount of amount of hot air.

●There are rotational flow pieces inside the drying chamber. lt is used to control the moisture and granle of raw material to needed level.

●The density will be added in the machine.

●Becausw gas speed at circle inside the drying chamber is high and the staying time of raw material is short, high efficiency and quick speed can be realized. lt is possible for small equipment to carry out large-scale production.






2.jpg

3.png

Technical parameters


Type

Main machine

dimensions(m)

Main machine

power(KW)

Treatment wind

capacity(m³/h)

Water evaporation

quantity(kg/h)

Floor area(mm)


XSG-2

250x2800
0.75~2.2
300-800
10-150
3500x2500

XSG-3

400x3300
1.5~3
600-1500
20-300
3800x2700

XSG-4

500x3500
3~4
1250-2500
25-500
4000x3000

XSG-5

600x4000

5.5

1500-4000

30-600

4200x3200

XSG-6

700x4200

5.5~7.5

2500-5000

40-800

4250x3250

XSG-8

900x4600

7.5

3000-8000

60-1250

4500x3500

XSG-10

1100x5000

7.5~11

5000-12500

100-2000

4750x3750

XSG-12

1300x5200

11~15

10000-20000

150-3000

5000x4000

XSG-14

1500x5400

15~18.5

14000-27000

200-4000

5250x4250

XSG-16

1700x6000

22

18700-36000

250-5000

5500x4500


Note:1.The evaporated amount of moisture is calculated when the temperature of inlet is 180℃ and the temperature of outlet is 80℃. 2.Beside the models above mentioned,specification can be made as request. 3.Occupied area will be different because of different environment.