Welcome Customer !

Membership

Jiangsu Xingxing Drying Equipment Co.,Ltd.
Free Member ·1YRS
ChangZhou,JiangSu
Manufacturer

Main Products: Dryer

Xwboo>Products

Jiangsu Xingxing Drying Equipment Co.,Ltd.Free·1YRS

  • E-mail

    zar.dangxian@jxxcn.com

  • Phone

    0086-519-88903988

  • Address

    Jiaoxi Industrial Park, Tianning District, Changzhou City

Contact Now

Static Vacuum Dryer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drying Equipment Series
Place of Origin
City, Province
Overview
Product Introduction: It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faste...
Product Details

Principle


It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.

Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.


Features

●Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.

●The heat source for evaporation may be low pressure steam or surplus heat steam.

●The heat loss is less.

●Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.

●It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.


Application

It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

Sketch of structure



Technical parameters


Model

GZY-600

GZY-800

GZY-1000

GZY-1400A

inside size of chamber

Ф600×976

Ф800×1247

Ф1000×1527

Ф1400×2054

Overall dimensions (LxWxH) (mm)

1135×810×1024

1700×1045×1335

1693×1190×150

2386×1675×1920

layers of baking shelf

4

4

6

8

interval of baking disk

82

82

102

102

size of baking disk

310×600×45

520×410×45

520×410×45

460×640×45

number of baking disk

4

8

12

32

permitted pressure inside the pipe of baking shelf(MPa)

≤0.784

≤0.784

≤0.784

≤0.784

Heating temperature

35-150

35-150

35-150

35-150

unload vacuum inside (MPa)

-0.09~0.096

Under the condision of -0.1mpa and 110℃,evaporation rate of water(kg/m²·h)

7.2

7.2

7.2

7.2

With condenser,Vacuum pump,Power

2X-15A
2KW

2X-30A
3KW

2X-30A
3KW

2X-70A
5.5KW

Without condenser,

Vacuum pump,

Power

SK-0.8
2.2KW

SK-2.7
4KW

SK-3
5.5KW

SK-6
11KW

Weight of drying chamber(kg)

250

600

800

1400


Note: The water ring vacuum pump is used in combination with mechanical pressurization to increase the vacuum.


Note:

○ When ordering, please select the appropriate vacuum dryer according to the physical properties of the initial moisture content of the dry material, the temperature of the vacuum, the dryness of the drying time and other factors. In the same type of vacuum dryer, there are four types of heating methods: steam hot water heat conduction oil and electric heating. For example, in order to increase the amount of drying, the number of drying racks can be increased appropriately. Please promptly submit to our factory.。

○ The accessories in the vacuum drying system mentioned above in the instruction manual can be supplied and installed by the user. Please specify when ordering。

○ The company can provide design, manufacture and installation for the special requirements of the user's vacuum drying system.。

○ The company's equipment implements quality three guarantees for users. All accessories, long-term supply, please rest assured。