Welcome Customer !

Membership

Jiangsu Xingxing Drying Equipment Co.,Ltd.
Free Member ·1YRS
ChangZhou,JiangSu
Manufacturer

Main Products: Dryer

Xwboo>Products

Jiangsu Xingxing Drying Equipment Co.,Ltd.Free·1YRS

  • E-mail

    zar.dangxian@jxxcn.com

  • Phone

    0086-519-88903988

  • Address

    Jiaoxi Industrial Park, Tianning District, Changzhou City

Contact Now

Vacuum Tray Dryer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drying Equipment Series
Place of Origin
City, Province
Overview
Product Introduction: It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faste...
Product Details

Principle


It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.

Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.


Features

●Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.

●The heat source for evaporation may be low pressure steam or surplus heat steam.

●The heat loss is less.

●Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.

●It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.


Application

It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

Sketch of structure

1.png


Technical parameters


Model

GZF-10

GZF-15

GZF-20

GZF-25

inside size of chamber

1500×1060×1220

1500×1400×1220

1500×1800×1220

3000x1800x1220

Overall dimensions (LxWxH) (mm)

1513×1924×1720

1513×1924×2060

1513×1924×2500

3026x1924x2560

layers of baking shelf

5

8

12

12

interval of baking disk

122

122

122

122

size of baking disk

460×640×45

460×640×45

460×640×45

460x640x45

number of baking disk

20

32

48

96

permitted pressure inside the pipe of baking shelf(MPa)

≤0.784

≤0.784

≤0.784

≤0.784

Heating temperature

35-150

35-150

35-150

35-150

unload vacuum inside (MPa)

-0.09~0.096


Under the condision of -0.1mpa and 110℃,evaporation rate of water(kg/m²·h)

7.2

7.2

7.2

7.2

With condenser,Vacuum pump,Power

2X-70A
5.5KW

2X-70A
5.5KW

2X-90A
2KW

2X-90A
2KW

Without condenser,

Vacuum pump,

Power

SK-3
5.5KW

SK-6
11KW

SK-6
11KW

SK-6
11KW

Weight of drying chamber(kg)

1400

2100

3200
4300


Note: The water ring vacuum pump is used in combination with mechanical pressurization to increase the vacuum.


Note:

○ When ordering, please select the appropriate vacuum dryer according to the physical properties of the initial moisture content of the dry material, the temperature of the vacuum, the dryness of the drying time and other factors. In the same type of vacuum dryer, there are four types of heating methods: steam hot water heat conduction oil and electric heating. For example, in order to increase the amount of drying, the number of drying racks can be increased appropriately. Please promptly submit to our factory.。

○ The accessories in the vacuum drying system mentioned above in the instruction manual can be supplied and installed by the user. Please specify when ordering。

○ The company can provide design, manufacture and installation for the special requirements of the user's vacuum drying system.。

○ The company's equipment implements quality three guarantees for users. All accessories, long-term supply, please rest assured。