Welcome Customer !

Membership

Jiangsu Xingxing Drying Equipment Co.,Ltd.
Free Member ·1YRS
ChangZhou,JiangSu
Manufacturer

Main Products: Dryer

Xwboo>Products

Jiangsu Xingxing Drying Equipment Co.,Ltd.Free·1YRS

  • E-mail

    zar.dangxian@jxxcn.com

  • Phone

    0086-519-88903988

  • Address

    Jiaoxi Industrial Park, Tianning District, Changzhou City

Contact Now

LPG Series High Speed Centrifugal Spray Dryer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drying Equipment Series
Place of Origin
City, Province
Overview
Product Introduction: Spray drying is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or par...
Product Details

Description

Spray drying is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as: solution, emulsion, suspension and pumpable paste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.

Principle

After the air been filtered and heated the air enters into the air distributor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Through the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be

discharged from blower.

Features

●The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air low,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially for drying the heat sensitive materials .

●Its final products own the good uniformity, flow ability solubility. and the final products are high in purity and good in quality.

●The production procedures are simple and the operation and control are easy.The liquid with moisture contents of 40-60%(for special materials,the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.The product particle diameters,looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and management.



2.png

Technical parameters

spec

LPG-5
LPG-25LPG-50LPG-100LPG-150LPG-200LPG-500LPG-1000

inlet temperature(℃)

130-300

outlet temperature(℃)

70-90

Max.water evaporation capacity(kg/h)

3-718-2535-5075-100120-150170-210400-500800-1000

Atomization driving

method

compressed

air transmission

Electric drive

rotation speed(r.p.m)

2500018000-2700018000-2700018000-2700015000-1800015000-1800012000-1500012000-15000

Heat supply

Electricity only

Electricity+steam

Steam+electricity or hot blast stove

Hot blast stove

Transmission power(KW)

4.2141823294376109

Heating power(KW)

183648728496144144

dried powder collecting

(%)

≥97%

≥97%

≥97%

≥97%

≥97%

≥97%

≥97%

≥97%

Diameter (mm)

Φ1.2

Φ1.9

Φ2.2

Φ2.56

Φ2.96

Φ3.36

Φ5.2

Φ7.6

Height(m)

2.23.64.65.46.379.212.4